Wholesale terms and credit
Which offer to a buyer is better once discount, prepayment and credit are counted.
About the topic
Wholesale looks simple: you sell a batch to a buyer at the wholesale price. In reality the conditions around the price often matter more than the price itself. A volume discount, prepayment, payment deferral, deductions for marketing and returns, the risk that the buyer will not pay: all of this changes how much money the brand really receives and when. The topic teaches you to compare buyer offers not by the list price but by the full cost of the terms package as a percentage of the invoice.
Start from the idea that a deferral is a loan you give the buyer for free. Say the invoice is RUB 1,000,000, the deferral 60 days and your money costs 18% a year. Then the cost of the deferral is 1,000,000 × 0.18 × 60 / 365 ≈ RUB 29,600, about 3% of the invoice. If the buyer asks for another 5% volume discount and a 2% marketing deduction, the package already costs about 10% of the invoice. An offer “price 4% higher but payment in 90 days” may be worse than “lower price, payment in 30”.
Next is the question of how to get money earlier. There are three ways: wait, give a discount for fast payment or sell the invoice to a factoring company. A “2/10 net 30” discount (2% for payment in 10 days instead of 30) looks modest, but gives an annual rate of about 2 / 98 × 365 / 20 ≈ 37%: the buyer who takes it receives very expensive money from you, and you pay more than a bank loan would cost. A factor that takes 3% for 60 days costs about 19% a year. The comparison shows what is better for you in your situation.
The third part is risk. A buyer’s credit limit is needed so receivables do not grow uncontrolled: if a buyer takes RUB 2 million a month with a 45-day deferral, your receivables are about RUB 3 million, and a limit below that stops shipments. A 2% non-payment probability on a turnover of RUB 20 million is an expected loss of RUB 400,000 that must be built into the price. The decisions of the topic: which terms to accept, what limit to give, what share of wholesale to hold, when to sell an invoice, how to assess the brand’s place at a multibrand retailer. Traps: counting discount and deferral separately, taking the contract payment term instead of the actual one, treating non-payment risk as the buyer’s business. Start with two term variants of one buyer and compare them as a percentage of the invoice.
Key ideas
Deferral is a loan to the buyer
Compare offers by the difference in terms. A buyer offers a price 2% higher with payment in 90 days instead of 30. The extra 60 days at 18% cost 0.18 × 60 / 365 ≈ 3% of the invoice, so the offer is worse by 1 point despite the attractive price. At a 10% rate the same 60 days cost 1.6%, and it is already profitable. The price of your money decides.
Terms package as a percentage of the invoice
Volume discount, marketing and return deductions, deferral cost and expected non-payment add up. 5% discount + 2% deductions + 3% deferral + 2% risk give about 12% of the invoice. Only the sum shows what an offer really costs, not its separate lines.
Early payment discount as a rate
The rate depends on the discount and on the number of days saved. 1% for payment on day 15 instead of day 45 is 1 / 99 × 365 / 30 ≈ 12% per year: if your money costs 18%, such a discount is worth giving. Double the discount to 2% over the same days and the rate rises to about 25%: now it costs more than your money.
Credit limit and receivables aging
The limit caps how much a buyer may owe you. If he takes RUB 2 million a month with a 45-day deferral, the debt reaches about RUB 3 million. Receivables are split by age: the older the debt, the higher the chance it is not repaid. A buyer’s delay is your risk, not only his.
End-to-end cash gap
The gap is converted into roubles: frozen money × rate × days / 365. With purchases of RUB 3 million, a gap of 120 days and a rate of 18%, this is about RUB 177,500, almost 6% of the purchase. If you shorten the gap by 30 days, for example with a shorter buyer deferral or paying the factory in instalments, the gain is about RUB 44,400.
Each side has a price limit, and it is set by the alternative, not by a wish
Your price limit is built from the best alternative RUB 1,060.00 with a risk premium of 3%, switching costs of RUB 22.50 per unit and delay losses of RUB 12.00 per unit: RUB 1,126.30. The counterparty limit of RUB 915.00 is its cost RUB 880.00 plus the share of margin on an alternative order that it would lose with some probability. The agreement zone is RUB 211.30 per unit. At the offer of RUB 1,000.00 you take 59.8% of the surplus against the wanted 70%, so it is worth asking RUB 978.39: a difference of RUB 432,200 a year on a volume of 20,000 items. The price of refusal is RUB 2.53 million for you and RUB 1.7 million for the counterparty.
Formula: Your limit = alternative price × (1 + risk) + switching per unit; the counterparty limit = its cost + (1 − replacement probability) × margin on the alternative
What to do: Before negotiations count both limits and the price of refusal, then name the price at which you take the chosen share of the zone.
Think first: The offer of RUB 1,000 is 11% below your limit. Does it mean you cannot agree?
Answer: No: the limit of RUB 1,126.3 is the most you are ready to pay, and an offer below it is beneficial. The question is the share of surplus: at RUB 1,000 it is 59.8% instead of the wanted 70%, so about RUB 978 is asked.
Concessions are traded by their value to the partner, not by their cost to you
You ask RUB 720,000 a year. Paying a day earlier costs you RUB 14,466 (volume RUB 24 million × 22% ÷ 365) and brings the partner RUB 11,836: the trade is unprofitable because your money is more expensive. Yet a public review of the partner costs you RUB 5,000 and is worth RUB 60,000 to it. Concessions are lined up by the ratio of value to cost; 4 concessions are enough to cover the ask: a value to the partner of RUB 870,000, a cost to you of RUB 315,000, a net gain of RUB 405,000. A one-percent discount equals 16.6 days of deferral.
Formula: Order of giving: by the descending ratio of value to the partner to cost to you; a day of payment = volume × rate ÷ 365
What to do: Make a list of concessions with two estimates and give first what is cheap for you and valuable to the partner.
Think first: A partner asks you to pay 15 days earlier. Why is it a poor trade at rates of 22% and 18%?
Answer: Your day costs RUB 14,466 and brings the partner RUB 11,836: you give more than it gets. The trade would make sense only if your rate were lower than its rate.
A brand reads the scorecard in advance: how many points are missing before an order
Brand A scored 68 points against an order threshold of 70: the decision is “a trial order”, 2 points short. Each point of a criterion adds the weight divided by five: 3 on demand and recognition, 4 on the product, 2 on terms. Raising terms, deferral, return and rotation from 3 to 4 gives 70 points and the decision “into the order”, while raising recognition from 2 to 3 gives 71. The brand sets terms itself and recognition cannot be raised in a season, so one starts with terms.
Formula: Contribution of a criterion = weight × score ÷ 5; the decision: stop if a score is below the minimum, otherwise by the thresholds of the total
What to do: Ask the buyer for the criteria and weights before the meeting and raise what is in your power: terms, documents, deadlines.
Think first: What is the cheapest way to bring brand A from 68 to the threshold of 70?
Answer: One point on terms (deferral, return, rotation): +2 points and exactly 70. Terms are in your power, while recognition will not grow in a season.
The bid price and bonus tiers in wholesale
Two wholesale decisions hide a price. A procurement bid: at a starting price of 5 m, a cost of 3.9 m and a margin of 8% the floor is RUB 4,239,130, that is a reduction of 15.2% is allowed; security raises the floor to RUB 4,299,896. A retro bonus: with tiers of 2% from 10 m and 4% from 20 m a turnover of 18 m gives RUB 360,000, at the threshold RUB 800,000, a marginal discount on the last 2 m of 22%. Rates and thresholds are entered with a date and checked by a specialist.
Formula: Floor = cost ÷ (1 − margin); marginal discount = Δ bonus ÷ Δ turnover
What to do: Do not go below the floor and do not buy extra for the threshold.
Think first: Why is a high marginal discount at a threshold no reason to buy more?
Answer: It is a discount on the extra buy: the goods must be sold or money gets stuck in stock.
How to work through it
- Write down 2-3 buyer term variants: price, volume discount, prepayment, deferral, deductions.
- Compute the cost of each package of terms as a percentage of the invoice at your cost of money.
- Add expected non-payment: probability from the buyer’s history × amount.
- Check the real payment delay, not the contract term.
- Compare ways to get money earlier: wait, early payment discount, factoring.
- Compute the end-to-end gap from the factory prepayment to the buyer’s money.
- Set a credit limit and rules for stopping shipment on delay.
- Assess the brand’s place at a multibrand retailer: share of space against share of sales and margin.
Where to start
Enter 2–3 sets of terms in “Wholesale terms”, then compare ways of getting paid in “Cost of payment terms” and calculate the “End-to-end gap”. Calculations of the topic in order: “Wholesale terms: wholesale discount, prepayment, credit”, “Wholesale customer: profit after terms”, “Cost of payment terms, deductions and factoring”, “End-to-end cash gap: from the factory deposit to the buyer’s money”, “Early-payment discount: annual rate”, “Customer credit limit and wholesale receivables aging”, “A brand inside a multi-brand retailer: share of space and sales, margin and a decision”, “Transfer price and producer or importer markup: range and tax”, “Agreement zone and the price of refusal: how strong your alternative is and how hard you can push”, “Concession matrix: what to give first to get what you need and what it costs”, “Brand scorecard for a buyer: weighted criteria, stop criteria and a decision by thresholds”, “Tender bid floor and reduction from the starting price”, “Buyer’s retro bonus: tiers, marginal discount and the risk of buying up to a threshold”. See also (their primary topic is another one): “Trade fair and pre-order: payback and batch risk”, “Co-funding a promotion with a platform or partner: the brand’s share”, “Pocket price: what the brand keeps from a delivery after all concessions”.
Calculations in this topic
Wholesale terms: wholesale discount, prepayment, credit
Compares offers to buyers with different discount, prepayment and credit: how much the brand really gets once the cost of capital and the risk of non-payment are counted.
Which offer is better once discount, prepayment, credit and non-payment risk are counted.
Wholesale customer: profit after terms
Calculates what the brand really earns from a wholesale customer after discounts, returns, markdown support, the cost of credit and acquisition spend, and at what minimum order the customer covers those costs.
What the brand really earns on a wholesale customer after all terms and at what order the customer pays back.
Cost of payment terms, deductions and factoring
Compares three ways to get paid for a wholesale shipment: wait out the credit, give a discount for fast payment or sell the invoice to a factor. Shows what credit and buyer deductions cost and what price uplift they call for.
What the buyer’s credit and deductions cost us and which way of getting paid is better.
End-to-end cash gap: from the factory deposit to the buyer’s money
Calculates for how many days the brand’s cash is “frozen” from the factory deposit to the buyer’s payment, what amount is needed at the peak and what financing the gap costs.
How many days and what amount of cash are “frozen” from the factory deposit to the buyer’s payment and what it costs.
Early-payment discount: annual rate
Turns a term such as “2% if paid within 10 days, full term 30” into an equivalent annual rate and compares it with the cost of your money. Shows the buyer’s gain and the price of the discount for the seller in money.
What an early-payment discount really costs on a yearly basis and whether it pays to pay earlier or to give such a discount.
Customer credit limit and wholesale receivables aging
Shows for each wholesale customer how much has been shipped on credit, how much of the limit is used, how much debt is overdue and what doubtful-debt reserve to create by age group. The reserve rates are editable.
Which wholesale customers we ship to on credit beyond the limit, how much debt is overdue and what doubtful-debt reserve is needed.
A brand inside a multi-brand retailer: share of space and sales, margin and a decision
For brands inside one retailer calculates the share of sales and the share of space, margin including markdown support, sell-through, turnover and GMROI and suggests a decision: expand, keep or cut the brand; gives a space guide by margin share.
Which brands give more margin per meter and per rouble of stock than the space they take, and what to do with them.
Transfer price and producer or importer markup: range and tax
Finds the transfer price range between a producer (importer) and an affiliated seller: from below by the minimum markup on full cost, from above by the buyer’s minimum margin and by comparable deals; shows profit and tax by link at your price and at the range edges.
In what range the price between your own companies is reasonable, who gets the profit at your price and what that means for tax.
Agreement zone and the price of refusal: how strong your alternative is and how hard you can push
For a deal in which you pay the counterparty (buying from a factory, a platform commission in rubles per unit) calculates your price limit from the best alternative with switching costs, the counterparty’s limit from its costs and alternative load, the width of the agreement zone, your surplus share at the offered price, the price of refusal for both sides in money per year and the price worth asking to take the share of surplus you need. Shows whose alternative is stronger and where to move the negotiation.
Where your price limit is, where the counterparty’s limit is, whether there is an agreement zone and who pays more for refusal.
Concession matrix: what to give first to get what you need and what it costs
From a list of concessions you can offer a partner (paying earlier, a volume commitment, a forecast, a lot size, prepayment, exclusivity) calculates the cost of each to you and the value to the partner with different cost of money, ranks them by “value to him ÷ cost to you”, builds the order of giving until the value covers what you ask and shows the net gain. Separately gives equivalents: how many days of deferral one percent of discount is worth and how many percent of discount a deferral is worth.
What to give the partner first to get what you need, what it costs you and what it is worth to him and how a deferral is swapped for a discount.
Brand scorecard for a buyer: weighted criteria, stop criteria and a decision by thresholds
From a table of criteria (weight, a score from 0 to 5 for each of the two brands, a minimum per criterion) it counts a total out of 100, the number of triggered stop criteria, the difference between the brands and a decision by thresholds: into the order, a trial order or decline. It shows on which criteria the brand loses most points so you know what to bargain over. The buyer sets the scores from their own data and samples: the calculation only adds up judgments and does not replace them.
What total score a brand gets on pre-set criteria, whether it has a stop criterion, what to decide (an order, a trial order, decline) and what to bargain over.
Tender bid floor and reduction from the starting price
From cost and the target margin counts the lowest bid price and the permissible reduction from the starting maximum price, adds the cost of the bid and performance security and shows at which reduction the tightened requirements switch on. Percentages, terms and thresholds are entered by you with a check date.
The price below which not to go and what the security costs.
Buyer’s retro bonus: tiers, marginal discount and the risk of buying up to a threshold
From turnover tiers and rates counts the bonus under a retroactive scheme (the tier rate on the whole turnover) or a stepped one, shows how much is missing to the next tier, the bonus increase and the marginal discount on the last roubles of turnover, and the bonus reserve from the forecast. Tiers and rates are entered by you from the contract.
How much bonus the turnover gives, what the last step to the threshold costs and how much to reserve.
Trade fair and pre-order: payback and batch risk
Two questions of wholesale. Whether taking part in a trade fair or showroom pays back: orders from contacts against the cost of taking part and the break-even number of orders. Whether to launch a batch on pre-orders: how many units are confirmed, whether they cover the factory minimum, how much money depends on free sales and what the result is.
Whether a trade fair or showroom will pay back and whether pre-orders are enough to launch a batch safely.
Co-funding a promotion with a platform or partner: the brand’s share
Calculates whether a promotion pays at your share of the discount: the margin gain, the brand’s costs, the partner’s share and the maximum brand share at which the promotion still breaks even. Enter your own terms: the platform does not insert other people’s offers.
At which share of the discount it still pays us to take part.
Pocket price: what the brand keeps from a delivery after all concessions
For each set of terms (a customer, a contract) deducts line by line from the list price the on-invoice discount, retro bonus, marketing development funds (MDF), listing fee, deductions and penalties and the early-payment discount, and shows the pocket price, the leakage from list and the pocket margin. Compares the terms with each other.
How much the brand really gets per unit after all concessions to a customer and which terms are better.
Self-check questions
- What percentage of the invoice does the buyer’s whole terms package cost?
- What cost of money do I use and where does it come from?
- What is this buyer’s real payment delay?
- What probability of non-payment do I assume and what is it based on?
- What is cheaper for me: wait, give a discount or sell the invoice?
- How many days is money frozen from the factory prepayment to the buyer’s payment?
- What credit limit does the buyer have and what happens when it is exceeded?
- What share of our turnover falls on a single buyer?
- How much do we earn after all terms rather than at the list price?
Knowledge check
Multiple-choice questions. The correct answer and the explanation follow each question.
The best alternative is RUB 1,060.00 with a risk of 3%, switching RUB 450,000 for 20,000 items, a delay of 20 days at RUB 12,000. What is your price limit?
- A. 1,126.30 ₽
- B. 1,060.00 ₽
- C. 1,091.80 ₽
- D. 1,000.00 ₽
Correct answer: A. 1,126.30 ₽. RUB 1,060.00 × 1.03 + RUB 22.50 + RUB 12.00 = RUB 1,126.30. The alternative price has to be supplemented with the risk, the switch and the delay. Covered in: Each side has a price limit, and it is set by the alternative, not by a wish.
The counterparty limit is RUB 915.00, yours RUB 1,126.30, the offer RUB 1,000.00, you want 70% of the surplus. What price should you ask?
- A. 1,000.00 ₽
- B. 978.39 ₽
- C. 915.00 ₽
- D. 1,126.30 ₽
Correct answer: B. 978.39 ₽. RUB 915.00 + (1 − 0.7) × RUB 211.30 = RUB 978.39. Asking at the counterparty limit is wrong: it earns nothing, while a price at your limit hands it the whole surplus. Covered in: Each side has a price limit, and it is set by the alternative, not by a wish.
The price of refusal is RUB 2.53 million a year for you and RUB 1.7 million for the counterparty. Whose alternative is stronger?
- A. Yours: refusal costs you 1.49 times more
- B. Equal: prices of refusal cannot be compared
- C. The counterparty’s: refusal costs you 1.49 times more
- D. It is determined only by the offer price
Correct answer: C. The counterparty’s: refusal costs you 1.49 times more. Above one means that refusal costs you more: RUB 2.53 million ÷ RUB 1.7 million = 1.49. You are weaker, and this is a reason to strengthen the alternative before negotiations. Covered in: Each side has a price limit, and it is set by the alternative, not by a wish.
The deal volume is RUB 24 million, your cost of money is 22% a year. How much does it cost you to pay one day earlier?
- A. 11,836 ₽
- B. 5.28 m ₽
- C. 14,466 ₽
- D. 65,753 ₽
Correct answer: C. 14,466 ₽. RUB 24 million × 22% ÷ 365 = RUB 14,466. For the partner at a rate of 18% a day is worth RUB 11,836. Covered in: Concessions are traded by their value to the partner, not by their cost to you.
How many days of deferral equal a one-percent discount at a rate of 22%?
- A. 1 day
- B. 30 days
- C. 16.6 days
- D. 365 days
Correct answer: C. 16.6 days. 1% ÷ (22% ÷ 365) = 16.6 days; conversely, 30 days of deferral equal a discount of 1.81%. Covered in: Concessions are traded by their value to the partner, not by their cost to you.
You ask RUB 720,000 a year. How many concessions in the order of giving are needed and what is the net gain?
- A. 4 concessions, a net gain of 405,000 ₽
- B. All 7, a net gain of 720,000 ₽
- C. 1 concession, a net gain of 870,000 ₽
- D. 4 concessions, a net gain of 315,000 ₽
Correct answer: A. 4 concessions, a net gain of 405,000 ₽. The first four concessions give the partner RUB 870,000, which covers the ask; they cost you RUB 315,000; RUB 720,000 − RUB 315,000 = RUB 405,000. Covered in: Concessions are traded by their value to the partner, not by their cost to you.
Brand A scored 68 points against thresholds of 70 and 55. What does raising terms from 3 to 4 give?
- A. +1 point: 69, the decision does not change
- B. Nothing: the decision is taken by a stop criterion
- C. +15 points: the brand becomes the leader
- D. +2 points: exactly 70, the decision “into the order”
Correct answer: D. +2 points: exactly 70, the decision “into the order”. The weight of terms 10 is divided by 5: each point of the criterion gives 2. 68 + 2 = 70, and the “into the order” threshold includes the value 70. Covered in: A brand reads the scorecard in advance: how many points are missing before an order.
The cost is 3.9 m RUB, the target margin 8%. What is the price floor?
- A. RUB 4,212,000
- B. RUB 3,611,111
- C. RUB 4,239,130
- D. RUB 3,900,000
Correct answer: C. RUB 4,239,130. 3,900,000 ÷ 0.92. Covered in: The bid price and bonus tiers in wholesale.
Tiers 2% from 10 m and 4% from 20 m (retro), turnover 18 m. What is the marginal discount on the last 2 m?
- A. 22%
- B. 4%
- C. 2%
- D. 11%
Correct answer: A. 22%. (800,000 − 360,000) ÷ 2,000,000 = 22%. Covered in: The bid price and bonus tiers in wholesale.
On which turnover is the bonus counted under a retroactive scheme?
- A. Only on the turnover within the tier
- B. Only on the last purchase
- C. On the previous period’s turnover
- D. On the whole turnover for the period
Correct answer: D. On the whole turnover for the period. That is why the bonus jumps at the threshold. Covered in: The bid price and bonus tiers in wholesale.
Common mistakes
Mistake: Counting the volume discount separately from the deferral
What it costs: The package seems cheaper
How to avoid: Add all terms as a percentage of the invoice.
Mistake: Ignoring the real payment delay
What it costs: Money arrives later and the gap is bigger
How to avoid: Use the actual term from history.
Mistake: Computing margin at the list price rather than after discounts, deferral and deductions
What it costs: Profit is below plan
How to avoid: Count margin after the package.
Mistake: Treating credit limit and delay as the buyer’s business
What it costs: Debt grows and shipments run at a loss
How to avoid: Manage the limit and receivables aging as your risk.
Mistake: Accepting an early payment discount without comparing it to the price of own money
What it costs: Giving away an expensive discount
How to avoid: Compute its annual rate.
Mistake: One goes into negotiations without knowing the counterparty limit and one’s own price of refusal
What it costs: Accepts the first offer and gives away the surplus On a volume of 20,000 items the forgone gain is RUB 432,200 a year.
How to avoid: Count both limits and the price at which you take the needed share of the zone Check the least reliable inputs, the counterparty’s costs and the probability of replacing the volume, over a range and see whether the conclusion changes.
What it looks like (illustrative figures): At the offer of RUB 1,000.00 your share of the surplus is 59.8% instead of the wanted 70%; the price worth asking is RUB 978.39.
Mistake: Cutting the price below the floor to win
What it costs: The contract is loss-making A loss over the whole term of the contract.
How to avoid: Count the floor with security Keep a reserve for performance and do not go deeper than the floor.
What it looks like (illustrative figures): A bid of 4.0 m RUB gives a margin of about 1% against a target of 8%.
Russia and the EAEU
In Russia wholesale is formalized by a supply contract (Civil Code, chapter 30), payment and liability terms are written in it and shipment is confirmed by UPD through electronic document exchange. For marked goods the codes are passed to the buyer in the same workflow, and an error in the transfer creates deductions and payment problems. Good practice: fix in the contract the payment term in days from the date of the signed UPD, a penalty for delay and the right to stop shipment on debt.
The buyer price is quoted with 22% VAT or without it: a VAT payer wants the credit and a simplified-regime buyer does not, so for the same money in hand the final price differs. Retail chains often impose their own terms: bonuses for volume and marketing, penalties for short delivery and missed deadlines, returns of unsold goods. These items must be converted into percentages and allowed for before signing.
Factoring in Russia is available through banks and specialized companies; it comes with recourse (the risk stays with you) and without; commission and rate depend on the buyer’s quality, check the terms. For receivables control, counterparty checks, electronic reconciliation acts and insurance help. Take rates and tariffs on the date of the deal.
Wholesale to EAEU countries adds currency, taxes and documents. Indirect taxes inside the union are paid under the destination principle: an import declaration and supporting documents are needed (EAEU Treaty, Annex 18). As of 14.11.2026, VAT rates by country are on the page “EAEU and CIS countries”; check them with an accountant. Settlements in national currencies (BYN, KZT, AMD, KGS) create exchange-rate risk on a long deferral, so the longer the deferral the more it costs in rate drift. Russia applies currency control (law 173-FZ) to settlements with non-residents. For a buyer from another country, payment-discipline checks and insurance are harder: allow a higher probability of non-payment.
Categories and audiences
- Apparel
- On apparel: wholesale runs on seasonal collections with pre-orders and shipment in several deliveries, and returns of unsold goods are sometimes part of the terms. Allow for them as a percentage. Buyer end-of-season discounts press on your brand, so agree on pricing policy and reorders.
- Footwear
- In footwear: the buyer purchases by size grids and is sensitive to depth in the core of sizes, so short delivery of the core hits sales and brings penalties. Deferrals are usually long and receivables are notable due to the high price per pair. Watch the share of one large buyer in turnover.
- Accessories
- For accessories: average ticket and batches are smaller, so there are many small buyers and a credit limit for each matters. The gift season shifts shipments to autumn and the money arrives after it. The rate of deductions for merchandising and display can be higher than in apparel.
- Kids
- If it is children’s wear: pre-orders for the school season and holidays, so deliveries are rigidly tied to dates and lateness devalues the batch. Chains buy with a long deferral, and certificates and marking matter for acceptance. Agree acceptance terms and penalties in advance.
- Men
- A buyer compares men’s basic models with what is already on their shelf, so they bargain over price and volume. On the other hand, you can sign a framework contract for a year with a shipment schedule and fixed terms. Calculate receivables for such buyers from history: compare the contractual payment term with the actual one over recent seasons.
- Women
- A buyer of the women’s line orders fewer pieces of each model but more different models, and often asks for the right to return or exchange unsold sizes. Part of the leftover risk then lies with you. In the package of terms keep a separate “returns and exchanges” line and calculate it for each buyer rather than as one average percentage.
Questions this topic answers
- Which offer to a buyer is better?
- What do the discount and credit cost us?
- What non-payment risk to assume?
- What does the buyer’s whole package of terms cost as a percentage of the invoice?
Key measures and terms
- Cash gap
- Net working capital
- Discount rate
- Sell-in and sell-out
- Cost of payment terms
- Buyer deductions
- Factoring
- End-to-end cash gap
- Buyer (retail purchaser and wholesale customer)
- E-document exchange and UPD
- DSO (days of receivables)
- Wholesale and wholesale order (OPT)
- Exclusivity, territory and minimum purchases
- Retailer account report (for a brand)
- Private label (the retailer’s own brand)
Study first
What next
Related: “Channels: wholesale, retail, platforms”, “Cash and working capital”, “Order data quality”.
Documents on this topic
- Payment calendar: priorities and cash gap
- Working capital and the cash conversion cycle (CCC = DIO + DSO − DPO)
- Wholesale documents: pre-order, ship window, chargebacks, EDI/ASN
- Buyout, commission sale and consignment: operating cycle and cash
- Brand and retailer contracts: supply, commission, consignment, agency, dropshipping
- Commercial terms: payment terms, retro bonuses, MDF and listing fees, SLA penalties, chargebacks
- Trends, DNA and trade shows: collection balance and participation payback
- Jewelry: metal, fineness, stones and the cost by metal
- Negotiations with suppliers and platforms: BATNA, the price of refusal, the concession matrix and scenarios
- A buyer session: the brand scorecard, the agenda and the order terms
- Taxes, fees and wholesale: separate VAT, sole proprietor contributions, the packaging fee, the warranty reserve, the bid price and the retro bonus