Syntha Lab RU

Taxes, fees and wholesale: separate VAT, sole proprietor contributions, the packaging fee, the warranty reserve, the bid price and the retro bonus

The document explains six calculations where money is lost in details: how input VAT is split with and without VAT operations, what a sole proprietor’s burden on the simplified system consists of, what packaging costs as an environmental fee, what reserve is needed for warranty, below which price a bid in a procurement must not be submitted and what the last step to a bonus threshold costs. All rates, thresholds and terms are entered by you with a check date; the document does not replace an accountant, a tax specialist, a lawyer or a procurement specialist.

Contracts, tax, accounting Brand and retail Verified: 2026-11-17

Open interactively →

Why this document

Tax and contract rules change while the arithmetic stays: share, rate, threshold, term. If the arithmetic is fixed apart from the rates, a recalculation after an act changes takes a minute rather than a quarter. The document is read by the chief accountant, the tax consultant, the commercial director and the procurement manager when they need to quickly understand what a rule costs before following or circumventing it.

At a glance

What is this document and why is it needed?
The document explains six calculations where money is lost in details: how input VAT is split with and without VAT operations, what a sole proprietor’s burden on the simplified system consists of, what packaging costs as an environmental fee, what reserve is needed for warranty, below which price a bid in a procurement must not be submitted and what the last step to a bonus threshold costs. All rates, thresholds and terms are entered by you with a check date; the document does not replace an accountant, a tax specialist, a lawyer or a procurement specialist.
Who owns the document and how often is it rebuilt?
Accounting and the tax consultant keep rates and thresholds with a date, the commercial director is responsible for the bid price and the bonus tiers, the product manager for the warranty reserve; recalculate when an act or a contract changes.
What mistakes are the most common?
Splitting input VAT by revenue rather than by shipments → the share is distorted → take shipments for the period. Ignoring the five percent rule → the deduction is understated → check the threshold by costs. Applying the tax reduction by the full contributions with employees → the tax is understated → take the limit into account.

For whom

Brand
A brand pays the packaging fee, holds the warranty reserve, takes part in procurements and gives bonuses to wholesalers; the reserve per piece and the price floor matter to it.
Retail
A retailer receives bonuses from suppliers, splits input VAT in mixed operations and counts a sole proprietor’s burden; the bonus reserve and the marginal discount at the threshold matter to it.

What it consists of

Separate input VAT accounting

  • The input VAT on common costs is split pro rata to shipments: the exempt share equals exempt shipments divided by all shipments for the period. The deduction equals VAT × (1 − share), the rest goes to cost.
  • If the costs of exempt operations are within the five percent threshold of total costs, the deduction on common costs is full. The threshold and conditions are entered by you with a date and checked by a tax specialist.

A sole proprietor’s burden on the simplified system

  • Own contributions equal a fixed amount plus a percent of income above a threshold, not above a limit. On the “income” base they reduce the tax, with employees by no more than a set share of the tax; on the “income minus costs” base they go into costs and the tax is not below the minimum.
  • The burden equals the sum of the tax and own contributions divided by income. The amounts are indexed every year, so they are taken for the year of calculation.

The packaging fee and the warranty reserve

  • The fee equals the packaging mass in tonnes times the rate per tonne and the recycling target, for each kind; the share of self-recycling reduces it. Rates and targets are defined by acts for the year of calculation.
  • The warranty reserve equals the costs of repair and replacement at the expected claim share, divided by the number of sold pieces. Raising the repairable share lowers it if repair is cheaper than replacement.

The bid price in a procurement

  • The price floor equals cost divided by one minus the target margin; the permissible reduction equals one minus the floor divided by the starting maximum price. The bid and performance security is frozen money: percentages of the starting price × term × cost of money.
  • At a deep reduction special measures switch on: tightened security or a justification of the price. The threshold and the multiplier are entered by you with a date; the requirements are checked by a procurement specialist.

The retro bonus and the marginal discount

  • Under a retroactive scheme the rate of the reached tier applies to the whole turnover of the period, so at the threshold the bonus jumps. The marginal discount equals the bonus increase divided by the missing turnover.
  • The bonus reserve is counted at the effective rate of the turnover forecast applied to the turnover to date. The tax and contract regime of the bonus and the limits on imposing volumes are checked by a specialist.

What to do with the result

  • Record rates and thresholds in a separate table with the check date and the source on your side, not inside formulas.
  • Check the result with an accountant or a specialist before the return, the signing of a bid or a contract.

Where the data comes from

Data sourceFields
Accounting and taxesinput VAT by groups of costs, taxable and exempt shipments, income, contributions, rates at the date
Product and packagingpackaging mass by kind, sold, claim share, repair and replacement cost
Contracts and procurementsstarting price, cost, security, bonus tiers, turnover and its forecast

How to build it step by step

  1. Step 1: Set up a table of rates and thresholds with a check date.
  2. Step 2: Divide input VAT into taxable, exempt and common costs.
  3. Step 3: Count the exempt share by shipments and check whether the threshold applies.
  4. Step 4: For a sole proprietor count the contributions and tax for the year of calculation and compare the two simplified bases.
  5. Step 5: Count the packaging fee by kind and subtract self-recycling.
  6. Step 6: Build in the warranty reserve per piece and review the claim share.
  7. Step 7: Before a bid in a procurement count the price floor with security and the regime at your price.
  8. Step 8: For a bonus count the marginal discount at the threshold and the reserve from the forecast.

Formulas

MeasureFormulasNote
Input VAT deductionVAT on common costs × (1 − exempt shipments ÷ all shipments)If the five percent threshold is met, the deduction is full.
Bid price floor(cost + cost of security) ÷ (1 − target margin)Reduction = 1 − floor ÷ starting price.
Marginal discount(bonus at the threshold − bonus now) ÷ (threshold − turnover)For a retroactive scheme.

Worked example

An illustrative example: the figures of six calculations at default values

MetricValue
Input VAT deduction, RUB800,000
VAT to cost, RUB200,000
Sole proprietor’s own contributions, RUB104,390
Simplified tax after reduction, RUB195,610
Packaging fee, RUB25,200
Warranty costs, RUB276,960
Bid price floor, RUB4,239,130
Bonus at the threshold, RUB800,000

The sole proprietor’s burden is 6.0%, the permissible reduction of the bid 15.2%, the marginal discount of the bonus 22.0%. Rates and thresholds are illustrative: enter yours at the date.

Figures

Where input VAT goes
Bar chart: Deduction 0.8, To cost 0.200.20.40.60.8DeductionDeductionVAT: 0.80.8To costTo costVAT: 0.20.2m RUB
Data as a table
MeasureVAT
Deduction0.8
To cost0.2

Where input VAT goes. With an exempt share of 20% a fifth of the VAT goes to cost.

The bonus by turnover under a retroactive scheme
Bar chart: 10 million 200, 18 million 360, 19.9 million 398, 20 million 800020040060080010 million10 millionBonus: 20020018 million18 millionBonus: 36036019.9 million19.9 millionBonus: 39839820 million20 millionBonus: 800800k RUB
Data as a table
MeasureBonus
10 million200
18 million360
19.9 million398
20 million800

The bonus by turnover under a retroactive scheme. At the 20 million threshold the bonus jumps rather than grows smoothly.

Specifics by category

Apparel
Apparel: packaging is light, the fee small, warranty claims relate to seams and trims.
Footwear
Footwear: warranty claims are more frequent, repairing a sole is cheaper than replacement, the reserve is higher.
Accessories
Accessories: few repairable ones, replacement is more common but its cost is low.
Kids
Kids: check procurement and certification requirements, the reserve for claims is higher.
Men
Men: a stable turnover, bonus tiers are planned more precisely.
Women
Women: a seasonal turnover, revise the forecast for the bonus reserve more often.

Common mistakes

  • Splitting input VAT by revenue rather than by shipments → the share is distorted → take shipments for the period.
  • Ignoring the five percent rule → the deduction is understated → check the threshold by costs.
  • Applying the tax reduction by the full contributions with employees → the tax is understated → take the limit into account.
  • Taking last year’s contribution amounts and rates → the calculation is outdated → enter the values for the year of calculation.
  • Counting packaging mass in kilograms instead of tonnes → the fee is overstated a thousandfold → enter tonnes.
  • Not creating a warranty reserve → costs arrive in a jump → build in a reserve per piece.
  • Cutting the bid price below the floor and not counting security → the contract is loss-making → count the floor with security.
  • Buying extra for a bonus threshold → money gets stuck in stock → compare the marginal discount with the real need.

Russian specifics

  • Taxes, contributions, fees, thresholds and procurement requirements are defined by acts at the calculation date; in the calculations they are entered as guides with a check date of 2026-11-17 and are not norms. The result of the calculation must be checked with an accountant, a tax specialist, a lawyer or a procurement specialist.

Open interactively →