Syntha Lab RU

Cost and price

What the cost is made of, what price to set and what cost is allowed.

For a brand Development and production

Open interactively →

About the topic

A brand’s price is always settled from two sides. From below stands the unit cost: what a piece really costs once it is in your warehouse. From above stands the price a customer is willing to pay on the shelf. Between them lies a chain: your wholesale price, the retailer’s markup, VAT. This topic teaches you to travel along that chain in both directions and to see exactly where money leaks.

Everything starts from the product specification. Material is counted not by net length but with cutting waste: if a piece needs 1.5 m of fabric and 6% is lost in the marker, you must buy 1.5 / 0.94 ≈ 1.6 m, and at RUB 450 per meter that is RUB 718, not 675. On top come trims, sewing by workshop minutes, defects, samples, logistics and duty. Only then do you get a cost you can trust. While it is assembled by eye, any shelf price remains a guess.

Next comes the price chain. Say the cost is RUB 1,200 and the brand wants half of the wholesale price as margin. Then wholesale is RUB 2,400 (markup 100%, but margin 50%: markup is counted on cost, margin on price, and these are different numbers). The shop usually doubles wholesale: RUB 4,800 before VAT. VAT of 22% on top gives RUB 5,856 on the shelf. If the market accepts about RUB 5,990 for such an item, the reasoning flips: 5,990 / 1.22 ≈ RUB 4,910 before VAT, half goes to the shop, wholesale is about RUB 2,455, and at the same brand margin the allowed cost is RUB 1,227. You see at once whether the model fits the market before any fabric is ordered.

The decisions this topic supports: whether to put a model into production, which wholesale price to quote a buyer, what discount a buyer can get without losing margin, how to round the shelf price, and by how much a price can rise without losing demand. The last one needs elasticity: by what factor sales change when price changes. It cannot be taken from the air; it is estimated from your own price and sales data, and an error here is the most expensive one.

Typical traps: mixing up markup and margin; counting only material and sewing; computing price from the list while the buyer will get a discount; ignoring supplier terms (deferred payment, minimum order, volume discount change the full purchase cost); copying a competitor’s price without considering your own position. Where to start: take one live model, assemble its specification and walk the chain both ways. The gap between the two results is your working assignment.

Key ideas

Markup and margin: counted from what

The higher the margin, the faster the markup grows. A price of RUB 1,000 with a 40% margin means a cost of RUB 600 and a markup of 400 / 600 ≈ 67%. But a “40% markup” on the same RUB 600 gives a price of RUB 840 and a margin of only 29% (240 / 840). Two “forty percents” give prices of RUB 1,000 and RUB 840, so write the base next to the figure in the contract and in the table.

Cost as a specification

Cost is built from material with waste, operations by minutes, defects, samples, logistics and duty. Each line is checked separately: fabric use from the marker, not from a technologist’s estimate. That shows where the reserve is: cutting waste down from 8% to 6% on fabric worth RUB 675 saves about RUB 16 per piece (675 / 0.92 - 675 / 0.94).

Price chain from factory to shelf

It helps to turn the chain into shares of the receipt. Out of a RUB 10,000 purchase, 22% VAT takes about RUB 1,803, the remaining RUB 8,197 is split in half, and the brand gets RUB 4,098. With a cost of RUB 1,800 it keeps RUB 2,298, which is RUB 23 out of every RUB 100 at the till. Written this way, it shows at once how little is left and why an extra RUB 100 of cost is noticeable.

Reverse run: allowed cost

With equal shares for brand and shop, the allowable cost is about 20.5% of the shelf price (1 / 1.22 / 4). So lowering the shelf price by RUB 500 takes about RUB 102 off the allowable cost (500 / 1.22 / 4). That is what you have to find in the specification to keep the margin: in the marker, in the operations or in the material price, not in hoping for more volume.

Price position and elasticity

A price makes sense only next to competitors and demand. Position shows where you stand against the market, elasticity tells how sales react to a shift. If a price 10% higher drops sales by 15%, revenue falls (1.1 x 0.85 = 0.935 of the former), but at a 50% margin profit rises slightly (0.6 x 0.85 = 0.51 against 0.50). The limit at that margin is a sales fall of 16.7% (0.1 / 0.6): with a bigger fall the rise does not pay; with a 5% fall it pays all the more. Elasticity is estimated from your own data, not taken from a textbook.

Technical fabric: the premium in the price and the allowed price of the shell

In a membrane jacket the cost per garment is RUB 4,492: materials RUB 3,176, finishing RUB 106, batch tests RUB 60, labor RUB 1,150. The shell fabric gives 40.8% of the costs, and the premium for functionality RUB 1,082 is 24.1% of the costs. At a margin of 55% the shelf price is RUB 12,179. The main decision is not “whether to take the membrane” but up to what fabric price the garment still holds the minimum margin of 40%: RUB 1,417 per m² against the current RUB 780. Batch tests are divided by the batch: the smaller it is, the dearer each garment.

Formula: Price without VAT = costs ÷ (1 − margin); tests per garment = test cost ÷ batch

What to do: Negotiate the fabric with a price ceiling derived from the minimum margin, not with the “market average”.

Think first: Costs RUB 4,492, margin 55%, VAT 22%. Is the shelf price multiplied by 1.55 or divided by 0.45?

Answer: Divided: 4,492 ₽ ÷ 0.45 = 9,982 ₽ without VAT, 12,179 ₽ with VAT. Multiplying by 1.55 gives only 6,963 ₽.

Denim shrinkage: a point of shrinkage costs money on every pair

The pattern needs 1.55 m of fabric, but with length shrinkage of 4%, width shrinkage of 2% and cutting losses of 3% you must buy 1.70 m (9.6% on top). The fabric costs RUB 883 per garment and gives 51.6% of the costs. One point of length shrinkage costs RUB 10.3 per garment, and a rise of shrinkage from 4% to 7% adds RUB 28. So shrinkage is taken from the lab test of the fabric lot, not from the passport, and is put into the consumption once: a double reserve for the same thing overstates the price, and no reserve leaves the shop without meterage.

Formula: Consumption = length ÷ ((1 − length shrinkage) × (1 − width shrinkage) × (1 − cutting losses))

What to do: Ask for a shrinkage test on your own fabric lot and recount the consumption before the order.

Think first: Length shrinkage rose from 4 to 7%. Will fabric consumption grow by 3% or slightly more?

Answer: Slightly more: shrinkage divides, it is not subtracted; the fabric gets dearer by RUB 28 per garment.

Jewelry: the metal price matters more than the master

The item contains 4.2 g of alloy of fineness 585, which gives 2.457 g of pure metal, with losses 2.533 g are bought. Metal is 73.6% of the cost RUB 32,685, stones RUB 4,742, labor and coating RUB 3,690. At a margin of 50% the shelf price is RUB 79,751. A shift of the metal price by 15% raises the cost to RUB 36,294 and the price to RUB 88,559, and the margin falls to the minimum 35% at a metal price of RUB 13,371 per gram instead of RUB 9,500. So the item is sold with a price review at a metal price threshold, not once a season.

Formula: Pure metal = mass × fineness ÷ 1000; purchase = pure metal ÷ (1 − losses)

What to do: Set the metal price threshold at which the shelf price is reviewed and keep it next to the price list.

Think first: Metal gets dearer, stones and labor are the same. What share of the costs does metal give now: a third or almost three quarters?

Answer: Almost three quarters: 73.6%. That is why the metal price moves the margin more than the master’s labor.

A price has an optimum if the elasticity exceeds one in absolute value

At ε = -2.5, a cost of RUB 1,800 and fees of 15% the price excl. VAT is RUB 3,529, on the shelf RUB 4,306, profit RUB 991,878 against RUB 979,918 at the current price. This works only in the range of observed prices.

Formula: p* = c ÷ (1 − fees) × ε ÷ (1 + ε)

What to do: Move to the price in steps measuring the volume; check the VAT rate against the current act.

Think first: What does an elasticity of −0.8 mean for the optimal price?

Answer: There is no interior optimum: the profit grows with the price, only the corridor limits it.

A promotion is assessed against a baseline, not the weeks before it

The baseline 500 pcs is taken from last year and the trend growth 1.25; the actual 760 pcs gives an uplift of 52%, but the promotion profit is −RUB 188,000: break-even needed 917 pcs.

Formula: Promotion profit = actual × margin with discount − baseline × margin without discount

What to do: Compare the same calendar weeks and count the dip after the promotion.

How to work through it

  1. Assemble the specification of one model: materials with waste, operations by minutes, trims, packaging.
  2. Add what is often forgotten: defects, samples, logistics, duty and supplier terms, then get the full unit cost.
  3. Walk the chain forward: from cost and target margin get wholesale and the shelf price with VAT.
  4. Walk the chain backward: from the price the market accepts get the allowed cost.
  5. Compare the two results. If they differ, decide: change construction, supplier, margin or price segment.
  6. Check the price position among competitors and the rounding of the price tag.
  7. Estimate elasticity from your own data and only then plan a price rise or cut.

Where to start

If you have a bill of materials, start with “Unit cost from the bill of materials”, then check the price in “Allowable cost” and compare with “Price position among competitors”. If you know only the total cost, “Cost and price: from fabric to the shelf” is enough. Calculations of the topic in order: “Unit cost from the bill of materials”, “Cost and price: from fabric to the shelf”, “Allowable cost from the shelf price”, “Price, markup and margin”, “Price position among competitors”, “Supplier terms: total cost of buying per unit of demand”, “Pocket price: what the brand keeps from a delivery after all concessions”, “Elasticity from a price and sales table: log-log regression with an interval”, “Price for a country: from the target margin and commission to the shelf price in the local currency, an exchange rate reserve and a discount reserve”, “Technical clothing: the price of materials by layer, finishing, batch tests and the permissible price of the shell fabric”, “Denim: fabric consumption with shrinkage, the garment price by stage and the cost of defects at washing”, “Knitwear: yarn consumption, knitting and dyeing waste, the garment price by stage and a gauge-change scenario”, “Jewelry: cost by metal, fineness and stones, the price and the metal price at which the margin falls to the minimum”, “Optimal price from elasticity and cost”, “Regional price zones: profit from different prices”, “Acceptable price range from a survey (price sensitivity meter)”, “Launch price: skimming vs penetration”. See also (their primary topic is another one): “Comparing quotes: CMT, FOB, full package”, “Price monitoring by SKU: index to the market, position and price-scraping freshness”, “Price increase: volume, margin and notice period”.

Calculations in this topic

  • Unit cost from the bill of materials

    Builds the unit cost from a bill of materials: materials with waste, operations by factory minutes, overhead, defects, samples, logistics and duty. Then builds the price up to the shelf and shows where each rouble comes from.

    Which lines and in what proportion make up the unit cost and what shelf price results from it.

  • Cost and price: from fabric to the shelf

    Builds the unit cost from line items and the price chain: brand wholesale price, retail excl. VAT, shelf price.

    What the cost is made of and what price results in wholesale, retail excl. VAT and on the shelf.

  • Allowable cost from the shelf price

    Works from the market back to the factory: from the shelf price, the retailer margin and the brand’s target margin it computes the cost you can afford and the gap against today’s cost.

    What the cost can be if the shelf price and margins are set by the market.

  • Price, markup and margin

    Converts markup, margin and shelf price into each other including VAT and shows the profit left per unit.

    Which markup corresponds to which margin and what shelf price results with VAT.

  • Price position among competitors

    Compares your price with prices of similar items: median, range, rank and gap. Shows whether you are expensive or cheap for the market and which price falls inside the corridor.

    Where your price stands relative to comparables and whether it falls into the market “corridor”.

  • Supplier terms: total cost of buying per unit of demand

    Compares 2-4 suppliers not by list price but by total cost: minimum order and excess, a discount or retro bonus, prepayment and credit (cost of money), defects and returns, shortfall, consignment. Ranks with a risk premium.

    Which supplier is cheaper by total cost rather than list price and what its terms cost.

  • Pocket price: what the brand keeps from a delivery after all concessions

    For each set of terms (a customer, a contract) deducts line by line from the list price the on-invoice discount, retro bonus, marketing development funds (MDF), listing fee, deductions and penalties and the early-payment discount, and shows the pocket price, the leakage from list and the pocket margin. Compares the terms with each other.

    How much the brand really gets per unit after all concessions to a customer and which terms are better.

  • Elasticity from a price and sales table: log-log regression with an interval

    From a table of prices and sales over equal periods estimates the price elasticity of demand by least squares in logarithms, shows the confidence interval, the goodness of fit, the forecast of sales and gross profit at a new price and the profit-maximizing price.

    How sales followed the price, how sure the estimate is and what it promises at a new price.

  • Price for a country: from the target margin and commission to the shelf price in the local currency, an exchange rate reserve and a discount reserve

    From the unit costs, the target margin, the channel commission, the country VAT, the rate, the exchange rate reserve and the rounding step it counts the shelf price in the local currency for each country in the table, including a duty if the goods come from a third country. It shows the margin now and after an exchange rate shift, the premium to the Russian price (gray re-export is possible if the price is below the Russian one) and the discount reserve down to the minimum margin. The channel commission is set by a field: suppose 15%, take it from the offer.

    At what price to put the goods on sale in each country so that the margin survives after VAT, the channel commission and exchange rate swings and whether the price will turn out below the Russian one.

  • Technical clothing: the price of materials by layer, finishing, batch tests and the permissible price of the shell fabric

    From a table of layers and trims (quantity, cutting reserve, price per unit), the finishing of the fabric, the batch tests and the labor it counts the cost per garment, the price without VAT and on the shelf, the share of the shell fabric in the cost and the premium that a functional fabric gives against an ordinary one. It shows at what price of the shell fabric the margin falls to the minimum. The default values are illustrative: take the prices of fabrics, membranes and insulation from your own quotes and the test reports from the laboratory.

    How much a garment with a membrane and seam sealing costs, what share of the cost the functional fabric takes and at what price of it the margin falls to the minimum.

  • Denim: fabric consumption with shrinkage, the garment price by stage and the cost of defects at washing

    The fabric consumption at the finished size, the shrinkage in length and width, other fabric losses, the price per meter and the cost of the stages with a defect rate (cutting, sewing with trims, washing, finishing, packing) give the fabric consumption with the shrinkage allowance. From them the garment price after each stage, the contribution of defects to the price, the shelf price and the price of one point of shrinkage are counted. It shows why a garment costs more than the sum of operations: a defect at a late stage carries all the price already invested. Shrinkage and defects depend on the fabric, the washing and the factory: put in the results of a trial batch; the default values are illustrative.

    How much fabric is needed with shrinkage, how much a garment costs after each stage and how much defects at washing and finishing sit in the price.

  • Knitwear: yarn consumption, knitting and dyeing waste, the garment price by stage and a gauge-change scenario

    The weight of the finished garment, the yarn count and ply, the losses at knitting, cutting and dyeing, the price of yarn, dyeing and operations give the length and the weight of the yarn bought and the waste. From them the cost per garment by stage (yarn, dyeing, knitting, assembly, finishing, trims), the shelf price and the price of a kilogram of finished knitwear are counted. The scenario shows what a finer gauge or a yarn with a different count gives: the weight and the knitting price change and the cost is counted again. The default values are illustrative: take yarn and knitting prices from your own quotes and losses from a trial batch.

    How much yarn a garment needs with waste, how much the garment costs by stage and whether another gauge or yarn count pays off.

  • Jewelry: cost by metal, fineness and stones, the price and the metal price at which the margin falls to the minimum

    From the weight of an item, the fineness, the price of pure metal, the production losses, the stones, the labor and the fees it counts the weight of pure metal and of the metal bought with losses, the cost by item, the price without VAT and on the shelf, the share of metal and stones, the price per gram of the item and the sensitivity to the metal price: by how much the cost and the price change when the quotation shifts and at what metal price the margin falls to the minimum. Check the rules of accounting for precious metals and stones, assay hallmarking, marking and reporting in the state control system against the current norms; the default values are illustrative.

    How much an item costs by metal, fineness and stones, what shelf price gives the target margin and at what metal price it is time to change it.

  • Optimal price from elasticity and cost

    Finds the price giving the highest profit at a constant demand elasticity: from cost, the share of fees and acquiring, and the elasticity it counts the price excl. VAT and on the shelf, the volume and the profit against the current price. Takes the shelf price corridor into account (competitors, thresholds). At an absolute elasticity of one or less there is no interior optimum, and the calculation says so. Optionally checks the elasticity against two observations and warns if the optimum lies outside the observed price range. The elasticity is estimated by the “Demand elasticity” and “Elasticity from points” calculations: here it is used.

    Which price gives the highest profit at your elasticity and costs and what the corridor limit costs.

  • Regional price zones: profit from different prices

    Compares the profit at different prices in two or three zones (regions, formats, channels) and at one common price. For each zone from its elasticity and cost it counts its own price and profit, finds the best single price on a grid and shows the zones’ gain in roubles and percent. Checks the spillover: if the price gap exceeds the cost of shipping or of the customer’s trip, the zones will not hold. It complements the price corridors by country and channel: here are different elasticities inside one country.

    Whether different prices in zones pay off and whether they hold against spillover.

  • Acceptable price range from a survey (price sensitivity meter)

    Builds the acceptable price range from the answers of customers to four questions: at what price the item is “too cheap” (raises doubt about quality), “cheap”, “expensive” and “too expensive” (you would not buy). From the cumulative shares over a price grid it finds four points: the lower bound of acceptability (PMC), the optimal point (OPP), the indifference point (IPP) and the upper bound (PME). The acceptable price range lies between PMC and PME. It is a method of price perception, not of market prices: market prices are counted by “Price ladder” and “Price monitoring”, the survey sample size by “Survey sample size”.

    In which price range customers find the item acceptable and where the optimal point is.

  • Launch price: skimming vs penetration

    Compares two launch price strategies by the willingness to pay of different customer groups. A single price: the best of the groups’ maximum prices, selling to the groups whose willingness is not below the price. Skimming: first a high price, then steps down, each step taking new customers. Counts the profit of a single price, the profit of your step scheme with a share of customers who wait for the cut, the upper bound of ideal steps, the best schemes of one, two and three steps and the share of waiting customers at which the steps stop winning. For limited collections and drops; on marketplaces price transparency makes steps work worse. In-season prices are counted by the “Discount ladder” and “Scarcity and drops”.

    What is better for a launch: a single price or steps down given your structure of willingness to pay.

  • Comparing quotes: CMT, FOB, full package

    Brings factory quotes in different “packages” (cut and make only, with materials, full package) to one basis: the item price in your warehouse with brand materials, losses, logistics, one-off costs and the cost of money. Shows the gap to the target cost.

    Which quote is cheaper once brought to one basis and whether it meets the target cost.

  • Price monitoring by SKU: index to the market, position and price-scraping freshness

    From a table of prices collected by scraping competitors calculates for each SKU the market median and minimum, your price index, your place among the competitors and the status against the corridor. Excludes stale data and SKUs with too few competitors from the total so that the index is not built on noise.

    Where our price stands against the market for each SKU and whether the parsing data can be trusted.

  • Price increase: volume, margin and notice period

    Plans a price rise: the new price incl. VAT, the margin gain, volume loss at your elasticity, the profit result, the tolerable volume fall and elasticity, the model’s optimal rise and a table by rise size. Checks whether the days to the date cover the contract’s notice period.

    What a price rise gives with lost volume and whether the notice period fits.

Self-check questions

  • Can I name every cost line and the source of the figure?
  • Did I count material with cutting waste or by net length?
  • On which base is my margin stated and on which my markup?
  • What cost is allowed at the price the market accepts?
  • What discount can I give a buyer without losing the target margin?
  • Is VAT included in the shelf price and in the comparison with competitors?
  • Where is my price against the market and how do I explain it to a customer?
  • What is my elasticity and from how many observations was it estimated?

Knowledge check

Multiple-choice questions. The correct answer and the explanation follow each question.

  1. Materials RUB 3,176, finishing RUB 106, tests RUB 60, labor RUB 1,150. What is the cost per garment?

    • A. 3,176 ₽
    • B. 4,492 ₽
    • C. 9,982 ₽
    • D. 12,179 ₽

    Correct answer: B. 4,492 ₽. All four items add up: RUB 4,492. Materials alone give RUB 3,176, and RUB 9,982 and RUB 12,179 are already prices. Covered in: Technical fabric: the premium in the price and the allowed price of the shell.

  2. Batch tests cost RUB 36,000. How much do they add per garment at a batch of 600 and at a batch of 150?

    • A. 60 ₽ / 60 ₽
    • B. 36 ₽ / 144 ₽
    • C. 60 ₽ / 240 ₽
    • D. 600 ₽ / 150 ₽

    Correct answer: C. 60 ₽ / 240 ₽. Tests are divided by the batch: RUB 36,000 ÷ 600 = RUB 60, and at a batch of 150 it is RUB 240. A small batch makes the technical fabric dearer. Covered in: Technical fabric: the premium in the price and the allowed price of the shell.

  3. Costs RUB 4,492, margin 55%. What is the price without VAT?

    • A. 6,963 ₽
    • B. 12,179 ₽
    • C. 9,982 ₽
    • D. 2,021 ₽

    Correct answer: C. 9,982 ₽. The margin is counted from the price: RUB 4,492 ÷ (1 − 0.55) = RUB 9,982. A 55% markup on costs would give only RUB 6,963, and RUB 12,179 is already with VAT. Covered in: Technical fabric: the premium in the price and the allowed price of the shell.

  4. Pattern 1.55 m, length shrinkage 4%, width shrinkage 2%, cutting losses 3%. How much fabric to buy per garment?

    • A. 1.55 m
    • B. 1.61 m
    • C. 1.69 m
    • D. 1.70 m

    Correct answer: D. 1.70 m. The consumption is divided by each remaining share: 1.55 ÷ 0.96 ÷ 0.98 ÷ 0.97 = 1.70 m. The bare pattern and a simple “plus shrinkage” understate the purchase. Covered in: Denim shrinkage: a point of shrinkage costs money on every pair.

  5. Length shrinkage rose from 4% to 7%. How did the fabric cost per garment change?

    • A. 0 ₽
    • B. 10.3 ₽
    • C. 28 ₽
    • D. 883 ₽

    Correct answer: C. 28 ₽. Consumption and fabric cost rise: +RUB 28 per garment (almost 2.8 points at RUB 10.3). RUB 883 is the whole fabric cost, not the increase. Covered in: Denim shrinkage: a point of shrinkage costs money on every pair.

  6. Cost per good garment RUB 1,894, margin 60%, VAT 22%. What is the shelf price?

    • A. 4,736 ₽
    • B. 3,698 ₽
    • C. 5,778 ₽
    • D. 2,311 ₽

    Correct answer: C. 5,778 ₽. RUB 1,894 ÷ 0.40 = RUB 4,736 without VAT, with VAT RUB 5,778. A price without VAT is not published, and a 60% markup on costs gives less. Covered in: Denim shrinkage: a point of shrinkage costs money on every pair.

  7. Item mass 4.2 g, fineness 585. How much pure metal is in it?

    • A. 4.2 g
    • B. 2.457 g
    • C. 2.533 g
    • D. 585 g

    Correct answer: B. 2.457 g. 4.2 × 585 ÷ 1000 = 2.457 g. More is bought (2.533 g) because of losses, but that is no longer the pure metal of the item. Covered in: Jewelry: the metal price matters more than the master.

  8. What share of the cost 32,685 ₽ is metal (24,063 ₽)?

    • A. 33%
    • B. 73.6%
    • C. 50%
    • D. 36.8%

    Correct answer: B. 73.6%. RUB 24,063 ÷ RUB 32,685 = 73.6%. So a change in the metal price hits the margin harder than labor or stones. Covered in: Jewelry: the metal price matters more than the master.

  9. Shelf price RUB 79,751 with VAT, minimum margin 35%. At what metal price per gram will the margin fall to it if the item price is not changed?

    • A. 9,500 ₽
    • B. 18,988 ₽
    • C. 13,371 ₽
    • D. 10,925 ₽

    Correct answer: C. 13,371 ₽. With the item price unchanged the allowed cost is RUB 42,490; above the current RUB 32,685 there is a reserve for metal, and the threshold is RUB 13,371 per gram. RUB 18,988 is the price of a gram of the item on the shelf, not of the metal. Covered in: Jewelry: the metal price matters more than the master.

  10. When does a price have no interior optimum at constant elasticity?

    • A. When the cost is above the price
    • B. When VAT is below 22%
    • C. When the elasticity is one or less in absolute value
    • D. When the volume exceeds a thousand

    Correct answer: C. When the elasticity is one or less in absolute value. The formula p* = c ÷ (1 − r) × ε ÷ (1 + ε) requires ε below −1. Covered in: A price has an optimum if the elasticity exceeds one in absolute value.

  11. What is “without the promotion” taken from when there is no control group?

    • A. Last year’s sales in the same weeks adjusted for trend growth
    • B. The weeks directly before the promotion
    • C. The sales plan
    • D. A competitor’s sales

    Correct answer: A. Last year’s sales in the same weeks adjusted for trend growth. The weeks before carry other seasonality, last year in the same weeks keeps it. Covered in: A promotion is assessed against a baseline, not the weeks before it.

Common mistakes

  • Mistake: Mixing markup and margin

    What it costs: The price comes out lower than planned and margin melts on every unit

    How to avoid: Always fix the base of calculation in the agreement.

  • Mistake: Counting only material and sewing

    What it costs: Real cost is higher by defects, samples, logistics and duty

    How to avoid: Keep the specification by the full list of items.

  • Mistake: Taking fabric use by eye

    What it costs: Fabric is bought short or in excess

    How to avoid: Count from the pattern marker.

  • Mistake: Computing wholesale from the list

    What it costs: After the buyer discount the margin is off

    How to avoid: Use the average price after discounts and terms.

  • Mistake: Borrowing elasticity from someone else’s example

    What it costs: A price rise collapses sales

    How to avoid: Estimate it from your own price and sales pairs with an interval.

  • Mistake: The jewelry price is fixed for the season

    What it costs: Metal gets dearer while the shelf price stays The extra cost per item at the shift: RUB 3,610; the shelf price would have to be raised to RUB 88,559.

    How to avoid: Set a metal price threshold for a review Record the metal price on which the item price is built and the threshold of its deviation; recount the price when it is crossed.

    What it looks like (illustrative figures): A shift of the metal price by 15% raises the cost from RUB 32,685 to RUB 36,294; at a metal price of RUB 13,371 per gram the margin falls to 35%.

  • Taking the elasticity from one promotion

    What it looks like (illustrative figures): The optimum becomes random.

  • Ignoring the dip after the promotion

    What it looks like (illustrative figures): The uplift looks larger than it is.

Russia and the EAEU

In Russia the shelf price always includes VAT. Since 1 January 2026 the standard rate is 22% (federal law 425-FZ), so the chain “wholesale before VAT, shop, VAT on top” is counted by dividing by 1.22. For children’s goods on the approved list the rate is 10%, but the relief depends on the documents holding the data on the relevant certificate or declaration (law 218-FZ, in force from 1 October 2026); check whether your item qualifies and how it is proven.

If you are on the simplified tax regime (USN), the buyer price with and without VAT differs: a VAT-paying buyer wants an input credit, and many chains ask for a price with VAT. Above the revenue threshold (RUB 20 million under law 228-FZ) simplified-regime payers also charge VAT, so check your pricing policy in advance.

Chestny ZNAK marking adds to cost the price of codes and the work of applying them and putting goods into circulation; set it as a separate line. The contract price is fixed in the supply contract and its specification, settlement runs through electronic document exchange (UPD). On marketplaces you set the shelf price yourself, but commission and logistics are taken from it: do not take tariffs by habit, check them against the platform’s current offer.

In EAEU countries the price chain is the same; the VAT rate and tax environment change. Indicative figures as of 14 November 2026, verify with a local accountant: Belarus 20% (10% on a list that includes children’s goods: check the customs code), Kazakhstan 16% since 1 January 2026, Armenia 20%, Kyrgyzstan 12%. The sales tax in Kyrgyzstan (rate depends on the product) and the registration threshold in Kazakhstan can change the final shelf price: these figures need checking. Each country has its own price currency, so a shelf price in som, tenge or dram is built separately, not by converting the rouble price at the exchange rate.

Categories and audiences

Apparel
For apparel: the longest specification because fabric is expensive and depends on the marker. Count fabric from patterns, include shrinkage and cutting defects. The shelf price is tied to the season and trend, so check the allowed cost also against the expected depth of end-of-season discounts.
Footwear
If it is footwear: last, tooling and sole material take a large share of cost, and the size run is longer than in apparel. A batch splits across 8-12 sizes, so an unsold pair costs more. Allocate tooling cost across the run and price from the real depth by size.
Accessories
On accessories: little material, and the price often rests on brand and design, so markup is higher than in apparel. But the fixed part (samples, tooling, packaging) per unit is noticeable. For bags and belts check the price against the price steps buyers are used to.
Kids
In children’s wear: little fabric goes into a piece, but it is outgrown quickly and a parent pays for something worn briefly, so the shelf price is limited by what parents are willing to pay. A 10% VAT rate is possible on the list with a certificate or declaration; check each item. The allowed cost is often lower than for an adult equivalent, and certification and marking add fixed costs.
Men
A men’s basic (jeans, shirt, T-shirt) sits on the shelf next to a dozen close analogs, so the price corridor in the category is narrow. It is convenient to start the price chain from the market: work backwards from the market price to the allowable cost. Look for the reserve in the marker and in workshop minutes: patterns repeat from season to season, and a minute saved works in every batch.
Women
In a women’s line, cost depends heavily on construction: lining, complex seams, trims and finishing add operations, while the customer pays for the look, not for meters of fabric. Put samples and pattern corrections on a separate line. Estimate elasticity by group, for example dresses, knitwear and outerwear: one overall average mixes different reactions to price.

Questions this topic answers

  • What makes up a style’s cost and where is the room to save?
  • What shelf price results from our cost and margin?
  • What cost is allowable if the market sets the price?
  • How do the buyer discount, commission and rounding change the price and profit?

Key measures and terms

Study first

What next

Next step: “Production and import”, “Order size and break-even”, “Channels: wholesale, retail, platforms”. Related: “Wholesale terms and credit”, “Taxes and VAT”, “Markdown and exit price”.

Documents on this topic

Open interactively →