Price list and costing (landed cost)
Costing turns the factory price into the full cost of an item in the warehouse, and the price list sets wholesale and retail prices along the price chain. They decide what price to set and whether a discount can be given to a client, because they show whether margin is sufficient at every link before and after discounts.
Why this document
The cost of an item in the warehouse is above the factory price: freight, duty, broker, labeling, losses and exchange differences are added. If margin is counted from the factory price it looks higher than it is, and selling at that price brings a loss. Costing shows the full cost, and the price list tests the chain: brand, wholesale, retailer, customer. The product manager and buyer see how much room there is for discount, the commercial director approves the price, and the retailer sees at what markup it does not lose money.
At a glance
- What is this document and why is it needed?
- Costing turns the factory price into the full cost of an item in the warehouse, and the price list sets wholesale and retail prices along the price chain. They decide what price to set and whether a discount can be given to a client, because they show whether margin is sufficient at every link before and after discounts.
- Who owns the document and how often is it rebuilt?
- Brand: product manager and finance, each season before going to wholesale; agreed with the commercial director. Retailer: buyer and pricing, on each delivery; retail prices are approved by the category manager.
- What mistakes are the most common?
- Markup is confused with margin → price understated by tens of percent → one formula and notation. FX is taken “as of today” → when it rises the margin vanishes → use a planned rate with a buffer and a price revision condition. Duty, broker, marking and inland logistics are left out → cost understated → a full cost list in the template.
For whom
- Brand
- A brand computes the full cost (materials, sewing, trims, losses, logistics, duty, marking) and builds the wholesale price with a target gross margin, then the recommended retail price (RRP). Volume steps (MOQ) and FX matter.
- Retail
- A retailer receives the brand wholesale price, adds delivery and marking and sets the retail price from initial margin (IMU), VAT, rounding and competitors. For imported private label it computes landed cost the same way as a brand.
What it consists of
Costing
- Brand: FOB or EXW price × FX, freight and insurance, customs value, duty, fees, inland logistics; the sum is the full batch cost.
- Division into units: unit cost allowing for defects and losses (the “Landed cost of an imported item” calculation).
- Brand: The batch step table: factory minimum order (MOQ), unit price at 1,000, 3,000 and 5,000 units (volume discount), wholesale price, recommended retail price, discounted price; each step gets its own landed cost because fixed costs (fees, broker) are divided over a different batch.
Price chain
- Cost → brand wholesale price (target gross margin) → retail price excluding VAT (retailer IMU) → price with VAT → rounding to a price point.
- Key: margin is computed on price, markup on cost; do not mix them.
- Brand: Link to Model B: the coat in the example (landed 2072.7, 3,000 units) is costlier than the average Model B item (cost RUB 1,200); the same landed formula gives 1,200 at an FOB of about USD 9.4 per unit. The price chain of the average Model B item: cost 1,200, wholesale 2,400 (brand gross margin 50%), own site 4,500 excluding VAT, on the shelf 5,490 including 22% VAT, marketplace 3,700 excluding VAT; the site markup to wholesale is 1.88.
The list and terms
- Brand: SKU, description, RRP, wholesale, minimum order, multiple, lead time, volume and prepayment discounts.
- Currency and price validity: the term and the condition for revision when FX changes.
Brand and retailer: what is computed differently
- Brand: a brand price list is computed from landed cost to the wholesale price, the recommended retail price and the discounted price; batch steps and factory MOQ change cost, FX and duty enter the price of the new batch.
- Retailer: a retailer takes the brand purchase price and computes markup and IMU by category, checking that the tag price equals the till price and fits the price step.
Brand: how the document differs and what to add
- Brand: a brand price list is wholesale, retail and a recommended price: wholesale is computed from landed cost and target margin, retail from wholesale and the retailer margin.
- Brand: FX and duty enter landed cost before price rounding: recomputing a new batch after a 10% FX rise moves wholesale and requires a new price list for partners.
- Brand: a brand sets wholesale terms: minimum order, pack multiple, volume discounts and payment terms; the net price after terms is below the list (pocket price).
- Brand: a unified price across channels (wholesale, site, marketplace) protects partners: recommended retail and discount rules are written in contracts.
- Brand: prepayment to the factory raises the unit cost: a 30% advance for 120 days at 20% adds the cost of money, which is included in landed cost.
- Brand: a currency price list (export, purchases in yuan) is kept in a separate column and revised against a basket of rates.
Retailer: how the document differs and what to add
- Retailer: the retailer’s price policy starts from the market and the category target markup: the purchase price is checked against competitor shelves.
- Retailer: a retailer’s private label is computed like a brand: landed cost and the margin of two links in one company, so the full retail markup is visible.
- Retailer: markup by category adds up to network margin: price points, rounding to psychological prices and discount rules are the same for all stores.
- Retailer: the shelf and online price are the same or differ by a rule: the price difference is written down, otherwise customers move to where it is cheaper.
- Retailer: purchase terms (deferral, returns, price-reduction compensation) enter net purchase price and margin; without them the markup looks higher than actual.
- Retailer: promotions and card discounts are built into the selling price calculation: the margin at the price tag is higher than at the average ticket, and the network manages the second number.
How to read the result and which decisions follow
- The computed price including VAT is above the nearest competitors by more than 10% (a guide): either lower the margin or choose another segment; the decision is to reduce costs (landed cost) or accept another segment, not to cut price without a calculation.
- A 10% FX rise moves wholesale by a few percent: recompute new-batch prices before ordering; prices of current stock change by policy, not by the day’s rate.
- Brand margin after wholesale terms (bonuses, payment terms) is below target: revisit terms, not the price list; net price matters more than the announced one.
Control checks
- The chain is recomputed backwards: landed cost RUB 2,073 per unit → brand wholesale 4,606 (brand margin 55%) → price excluding VAT 10,235 (retailer margin 55%) → including VAT 12,487 → shelf RUB 12,490 after rounding to a price point; reverse check: price excluding VAT 10,238 − wholesale 4,606 = RUB 5,632 of retailer margin, actual IMU 55% after rounding.
- The chain agrees backwards: shelf price excluding VAT less retailer margin less brand margin equals landed cost.
- Tax parts (VAT, duty) are shown in separate lines; rates and FX at the calculation date are written in the header.
- Typical traps: margin computed on cost rather than price, VAT included in wholesale, duty from FOB instead of CIF, a price after rounding gives a different margin.
Where the data comes from
| Data source | Fields |
|---|---|
| Bill of materials (BOM) | Materials and consumption, trims, cutting waste, sewing (price per minute). |
| Factory quotation | FOB or turnkey price, currency, MOQ, volume steps, payment terms. |
| Logistics and customs | Freight, insurance, duty rate by HS code, broker, certification, marking. |
How to build it step by step
- Step 1. Collect the bill of materials and consumption with cutting waste.
- Brand: Step 2. Obtain the factory price (FOB, CMT or turnkey) and volume steps; convert to rubles at a planned rate with a buffer.
- Brand: Step 3. Add freight, insurance, duty (by HS code), customs fees, broker, marking and inland logistics.
- Step 4. Divide by quantity allowing for defects and losses: the full unit cost.
- Brand: Step 5. Set the target brand gross margin and compute the wholesale price; check the margin after discounts and payment terms.
- Retailer: Step 6. Compute the retail price from retailer IMU, add VAT and round to a price point.
- Step 7. Check against the price ladder and competitors; if they disagree, return to materials, volume or margin.
- Step 8. Fix the price list, its validity and the revision rule for FX.
Formulas
| Measure | Formulas | Note |
|---|---|---|
| Customs value | CIF = FOB × FX + Freight + Insurance | The composition of customs value is determined by customs per delivery terms: check with a broker. |
| Full batch cost | Landed = CIF + Duty + Fees + Inland logistics | Import VAT under the general regime is deductible and not part of the cost. |
| Wholesale price | Wholesale = Cost ÷ (1 − Brand margin) | Margin on price, not markup on cost. |
| Retail | Retail excluding VAT = Wholesale ÷ (1 − IMU); Price = Retail × (1 + VAT) | The “Price, markup and margin” calculation. |
| Allowable cost | Allowable cost = Shelf price excluding VAT × (1 − IMU) × (1 − Brand margin) | The reverse “Target cost from the shelf price” calculation. |
| Duty at a combined rate | Duty = max(Percent × Customs value; Minimum (EUR) × Rate × Number of kg or pairs) | For a number of items of chapters 61, 62 and 64 of the EAEU customs nomenclature the rate is combined: check the code and the rate in the tariff (the norm was matched in the register by title only); with a low item price the minimum applies and the duty is above 12% of value. |
| What to add to landed | Landed = (CIF + Duty + Fees + Inland delivery + Marking) ÷ Sellable units + Cost of money on prepayment; insurance = 110% of (FOB + freight) × rate | Cost of money: a prepayment of 30% of FOB 120 days before arrival at a rate of 20% adds RUB 32 per unit in the example; defects and losses are divided over sellable units; marking and equipment at the operator tariff. Broker and fees can be fixed or percentage. |
Formulas in notation
- Unit landed cost
LC = [CIF · (1 + d) + F + L] / U
d is the duty rate, F is fees and broker, L is inland delivery; import VAT is recoverable, so it is not part of cost.- Wholesale
W = LC / (1 − m_b)
m_b is the brand target gross margin as a share of the wholesale price.- Retail excl. and incl. VAT
R = W / (1 − m_r); P = R · (1 + v)
m_r is the retailer margin, v is the VAT rate; the shelf price is rounded to a price point.
Worked example
An Asian batch: from the FOB price to the shelf price (the example item is costlier than the average Model B item; the link to Model B is in the text)
| Link | Amount, RUB |
|---|---|
| FOB USD 18 × 3000 units × 90 | 4,860,000 |
| CIF: plus freight and insurance | 5,364,300 |
| Duty 12% | 643,716 |
| Landed: the whole batch | 6,218,016 |
| Landed per unit | 2,072.7 |
| Brand wholesale at 55% margin, excl. VAT | 4,606 |
| Retail at 55% IMU, excl. VAT | 10,235 |
| Retail incl. VAT 22% | 12,487 |
| Shelf price (rounded) | 12,490 |
From RUB 2,073 landed the shelf price comes to RUB 12,490: after rounding the retailer gets an IMU of 55%. Duty and logistics add 28% over the FOB price: this uplift is what first estimates forget. The 22% VAT rate applies from 2026; for listed kids goods 10% applies provided conformity document data is available.
Figures
- positive
- negative
- total
Data as a table
| Step | Change | Level |
|---|---|---|
| Unit landed cost | — | 2,073 |
| Brand margin | +2,533 | 4,606 |
| Retailer margin | +5,629 | 10.2k |
| VAT | +2,252 | 12.5k |
| Computed price incl. VAT | — | 12.5k |
The price chain: from landed cost to the shelf price. Unit cost with import plus brand margin gives wholesale; plus retailer margin gives retail excluding VAT; VAT gives the shelf price.
Data as a table
| Measure | Per unit |
|---|---|
| Factory price | 1,620 |
| Freight | 160 |
| Insurance | 8 |
| Duty | 215 |
| Fees and broker | 30 |
| Inland delivery | 40 |
What a unit of landed cost consists of. The factory price is one part of the full cost: freight, duty, fees and inland delivery add a noticeable share.
Specifics by category
- Apparel
- Costing by BOM: fabric (consumption and cutting waste), lining, trims, labels; the volume step is noticeable because of fabric MOQ. Price is by style and size, but sizes usually share one price.
- Footwear
- Cost includes the last and tooling (molds, dies) amortized over the run; leather and sole materials are costlier and swing with FX; price depends on the upper material and sole attachment. Duty and certification differ from apparel.
- Accessories
- Fewer materials but expensive hardware (clasps, metal); costume jewelry and bags are costed per component; high initial margin but a limited run, so sample and tooling costs per unit are higher.
- Kids
- Price is sensitive: the shopper compares with mass segment and the item goes out of date quickly; certification costs under TR CU 007/2011 and stricter material control go into cost. 10% VAT with confirmation (for the listed goods).
- Men
- Simpler styles, less sewing and trim, but higher fit and size-run requirements; price is read through material quality; a narrower price ladder.
- Women
- More complex styles and details, more color and fabric variants, more fashion: costs are higher and more varied, and prices are rounded to psychological points (for example RUB 4,990).
Common mistakes
- Markup is confused with margin → price understated by tens of percent → one formula and notation.
- FX is taken “as of today” → when it rises the margin vanishes → use a planned rate with a buffer and a price revision condition.
- Duty, broker, marking and inland logistics are left out → cost understated → a full cost list in the template.
- Discounts and payment terms (deferral, bonuses) are not counted → real margin is lower → compute margin after discounts.
- The shelf price is not aligned with the price ladder → cannibalization → check after computing.
Russian specifics
- The general VAT rate is 22% since 1 January 2026; for listed kids goods 10% applies when conformity document data is in the register. Rule: Tax Code Art. 164: Tax Code, Art. 164 (VAT rates) (rule check not completed).
- The VAT base on import includes customs value, duty and excise; import VAT is deductible when the conditions are met. Rule: Tax Code Art. 160: Tax Code, Art. 160 (tax base on import) (rule check not completed).
- Duty rates follow the EAEU HS nomenclature; check the code and rate in the current edition. Rule: EEC decision 80 of 14.09.2021: EEC Council Decision of 14.09.2021 No. 80 (EAEU commodity nomenclature and Common Customs Tariff) (rule check not completed).
- Payments to a foreign supplier are subject to currency control: track terms and documents. Rule: Law 173-FZ of 10.12.2003: Federal Law of 10.12.2003 No. 173-FZ on currency regulation and control (rule check not completed).