Fabric use by marker: material utilization, losses and their price in roubles
From the area of pieces by size, the size ratio in the marker, the fabric width and the marker efficiency calculates the marker length and the consumption norm per garment with end losses, shrinkage and fabric defects, the overall material utilization, the cost of fabric and losses per garment and per lot, the price of one percentage point of marker efficiency and checks it against the norm declared by the factory.
At a glance
- What question does it answer?
- How much fabric a garment and a lot need, what part of it goes to losses and what each point of marker efficiency is worth.
- What data is needed?
- Piece areas by size and the cutting plan: how many garments of each size in the marker.
- How to read the result?
- Example on the default values (a shirt, 150 cm fabric, marker efficiency 82%): the norm is 1.41 m per garment with a net consumption of 1.096 m, overall utilization 78%; losses RUB 188.77 per garment and RUB 188,768 on the lot. One point of the marker is worth RUB 10,156 on the lot; the factory norm is 6% above the calculation. Example on the default values: Marker length for the size set: 8.02 m; Consumption norm per garment: 1.41 m; Net consumption by pattern area: 1.096 m; Overall material utilization: 77.7%. The figures are illustrative: enter your own to see your result.
Why and how to reason
Fabric makes up a notable share of cost and has two parts: what goes into the garment and what is lost. A piece does not lie on the fabric edge to edge: gaps remain between pieces, there are remaining stock at the ends of a ply, the fabric shrinks after treatment and has to be cut out at defects. So the marker length is counted first: the pattern area of the size set divided by the width and the marker efficiency. Then consumption per garment: the length plus end losses divided by the number of garments in the marker, with corrections for shrinkage and defects. The net consumption equals the pattern area over the width: it cannot be less. The ratio of net to the norm gives the overall utilization. Example: a norm of 1.410 m, a net consumption of 1.096 m, utilization of 78%, losses of RUB 188.77 per garment.
When to use it
Use it when you check a consumption norm declared by the factory, compare fabrics of different widths, assess the gain from reworking a marker or count a lot under a tolling scheme where the risk of overuse lies with the customer. The calculation does not treat a repeating pattern and directional pile separately: for them enter a lower efficiency and larger end losses. For footwear and leather goods the hide area and yield per hide are counted, for accessories from roll materials the calculation fits.
How to read the result
Compare three numbers. The consumption norm against the one declared by the factory: a difference of 5% or more is a reason to ask for the marker (in the example 1.5 m against 1.41 m, an overpayment of about 54 thousand ₽ on a lot of 1,000). Overall utilization: below 70% means a complex style, a narrow fabric or a weak marker. The gain from one point of efficiency (about 10 thousand ₽ on the lot) shows how much time is worth spending on reworking the marker. The share of losses in the fabric cost is 22% in the example: money you pay for twice if the factory sews from your fabric.
Common mistakes
The first error: taking the factory norm as fact without checking the fabric width and shrinkage. The second: taking the efficiency of the best marker and not of the order’s size set. The third: not recalculating the norm when the supplier changes: width and shrinkage differ. The fourth: forgetting a repeating pattern and directional pile.
What data is needed?
- Piece areas by size and the cutting plan: how many garments of each size in the marker.
- The fabric width, marker efficiency, end losses, shrinkage and defects.
- The fabric price and the lot size; the factory norm for the check.
Inputs
| Field | Unit | Value in the example | Meaning |
|---|---|---|---|
| Usable fabric width | cm | 150 | The width without selvedges and spoiled edges that can be used for pieces. Width differs between suppliers: when you change the source the consumption is recalculated. The example value is illustrative. |
| Marker efficiency | % | 82 | The share of the marker area covered by pieces. Given by the marker software or the marker maker; lower for complex styles and a pattern with a repeat. The example value is illustrative. |
| End loss per ply | cm | 3 | How much length on each ply of the lay goes to the ends and trimming beyond the marker length. The example value is illustrative. |
| Shrinkage in length | % | 3 | The percent by which the fabric shrinks after treatment, from a wash test or the mill certificate. The consumption rises by it. The example value is illustrative. |
| Fabric defects | % | 2 | The share of length cut out at defects and bypassed. From the incoming fabric inspection. The example value is illustrative. |
| Fabric price per meter | per m | 600 | The price of a running meter excl. VAT delivered to the workshop (with duty for imported). The example value is illustrative. |
| Lot size | units | 1,000 | How many garments in the order. The example value is illustrative. |
| Consumption norm declared by the factory | m per garment | 1.5 | The norm from the quote or the contract: to check against the calculation. Empty: no check. The example value is illustrative. |
How it is calculated
| Step | Formula |
|---|---|
| Marker length | Lm = Σ (garments × area) ÷ (width × efficiency) |
| Consumption per garment | (Lm + end loss per ply) ÷ garments in the marker |
| Shrinkage and defects | ÷ (1 − shrinkage) × (1 + defects) |
| Utilisation | net consumption ÷ consumption norm |
| Losses | (norm − net consumption) × fabric price × lot |
Worked numbers
Default values from the app; in the interactive version you enter your own.
- Marker length for the size set
- 8.02 mThe pattern area of the set ÷ (width × efficiency).
- Consumption norm per garment
- 1.41 mWith end losses, shrinkage and fabric defects.
- Net consumption by pattern area
- 1.096 mThe average pattern area ÷ width: you cannot sew with less.
- Overall material utilisation
- 77.7 %Net consumption ÷ norm: the share of the fabric bought that goes into the garment.
- Fabric cost per garment
- 846.1 ₽
- Fabric loss per garment
- 188.77 ₽The difference between the norm and the net consumption at the fabric price.
- Fabric for the lot
- 1,410 m
- Losses on the lot
- 188,768 ₽
- Loss share in the fabric cost
- 22.3 %
- Gain from +1 pp marker efficiency on the lot
- 10,156 ₽How much money one point of marker rework gives: whether it justifies the marker maker’s time.
- Declared norm against the calculation
- +6.4 %
- Overpayment at the declared norm on the lot
- 53,898 ₽
- positive
- negative
- total
Data as a table
| Step | Change | Level |
|---|---|---|
| Net consumption | +1.1 | 1.1 |
| Marker gaps | +0.24 | 1.34 |
| End losses | +0.005 | 1.34 |
| Shrinkage | +0.041 | 1.38 |
| Fabric defects | +0.028 | 1.41 |
| Consumption norm | — | 1.41 |
Data as a table
| Marker efficiency, % | Fabric for the lot |
|---|---|
| 70 | 991k |
| 72 | 963k |
| 74 | 937k |
| 76 | 913k |
| 78 | 889k |
| 80 | 867k |
| 82 | 846k |
| 84 | 826k |
| 86 | 807k |
| 88 | 789k |
| 90 | 771k |
| 92 | 754k |
Sizes and area
| Size | Garments | Area, m² | Area share, % |
|---|---|---|---|
| S | 1 | 1.52 | 15.4 |
| M | 2 | 1.6 | 32.5 |
| L | 2 | 1.68 | 34.1 |
| XL | 1 | 1.78 | 18.1 |
The calculation covers fabric without a repeating pattern and directional pile: for them the marker efficiency is lower and end losses larger, enter them in the fields. Width, shrinkage and defects are different for each fabric lot, so the norm is recalculated when you change supplier and by the incoming inspection. For footwear and leather goods the hide area and yield per hide are counted instead of the roll width; for accessories from roll materials the calculation fits; for children’s the piece areas are small and the share of loss on the gaps between pieces is higher.
Nuances and limits
- Taking the factory norm as fact without checking the fabric width and shrinkage.
- Counting marker efficiency from the best marker and not from the order’s size set.
- Forgetting a repeating pattern and directional pile: losses are higher.