A reference of fabrics, trims and defects: fibers and compositions, density, shrinkage, the four-point defect score and roll acceptance
A working reference for those who choose, order and accept fabric and trims: how to tell fibers and their blends apart, what density, width and shrinkage mean, which fabric defects exist and how to score a roll in points in order to accept it, return it or claim a discount. It answers the question of which characteristics to write into the material requirements and what to check before cutting so that an error does not reach the finished garment and the customer.
Why this document
Fabric is a noticeable share of the cost of clothing, and an error in it is seen late: after cutting and sewing, sometimes after the customer’s first wash. The reference gives a common language to the technologist, the buyer, quality control and the seller: what to write into the requirements, how to measure shrinkage, how to count the defects of a roll and what to do with the result. The product manager, the technologist, the materials buyer and the retail category manager read the document when choosing a supplier and accepting goods. Without it disputes with a supplier go by word of mouth and not by protocol and points.
At a glance
- What is this document and why is it needed?
- A working reference for those who choose, order and accept fabric and trims: how to tell fibers and their blends apart, what density, width and shrinkage mean, which fabric defects exist and how to score a roll in points in order to accept it, return it or claim a discount. It answers the question of which characteristics to write into the material requirements and what to check before cutting so that an error does not reach the finished garment and the customer.
- Who owns the document and how often is it rebuilt?
- The technologist and the head of quality maintain the reference and the requirements, the materials buyer is responsible for the supplier, the product manager approves the samples; reviewed when the supplier changes and once a season; norms and standards are checked against the current edition.
- What mistakes are the most common?
- Brand: a sample is approved but a “similar” fabric is ordered → the lot has a different density and shrinkage → in the order refer to the sample and the lot protocol and check by a test. Brand: shrinkage is not measured but taken from a catalog → garments shrink after washing and the marker does not fit → test the lot and put shrinkage into the consumption. Retailer: garments are accepted without a sample wash → the customer finds shrinkage and skew → wash a sample from the lot before display and keep the result.
For whom
- Brand
- A brand chooses fabric and trims, approves the sample and accepts rolls before cutting: for it the requirements in the technical specification, the lab samples and the point inspection of rolls matter, because a fabric defect turns into a batch defect.
- Retail
- A retailer does not buy fabric but accepts finished garments and answers for the label, the description and returns: it needs to understand the composition, density, shrinkage and trims in order to read the supplier’s protocols, choose a sample wash and keep the return reasons by type of defect.
What it consists of
Fibers and compositions
- Fibers are divided into natural (cotton, linen, wool, silk), cellulose-based man-made (viscose, modal, lyocell) and synthetic (polyester, polyamide, acrylic, elastane). The properties of a fabric are set not only by the fiber but also by the yarn, the weave and the finish, so one cannot judge a fabric as a whole by the name of the fiber.
- Cotton is comfortable and absorbs moisture well but creases and shrinks. Linen is strong and cool and creases heavily. Wool is warm and springy but shrinks and felts if washed wrongly. Silk is delicate and lustrous, sensitive to moisture and rubbing. Viscose and modal are soft and drape well but lose strength when wet and shrink.
- Polyester is strong, dries quickly, absorbs little moisture and tends to static and pilling. Polyamide resists abrasion. Acrylic imitates wool and pills. Elastane is added in a small share, usually a few percent, so that the fabric stretches and returns to shape; a lot of elastane complicates cutting and sewing.
- The composition on a garment is stated on the label: the technical regulation for light industry products requires the raw material composition in the marking; check the rules for writing percentages and the tolerances in the text of the regulation and in the current explanations.
- Brand: write the composition into the swatch and trim card and into the technical brief for the factory in percent by fiber and before launch compare it with a lab analysis of a sample of the lot: you answer for the accuracy of the label to the customer.
- Retailer: on acceptance compare the composition label on the garments with the data in the product card and the supplier’s documents; record a composition discrepancy in an act before display.
Density, width and the structure of a fabric
- The surface density in g/m² shows the mass of a square meter; the weight of a running meter equals the density multiplied by the width in meters. Foreign specifications use ounces per square yard: 1 ounce per yd² equals 33.9 g/m². Illustrative guides for a talk with a supplier and not norms: thin blouse fabrics about 60–120 g/m², shirting about 100–160, suiting about 180–320, heavy denim about 300–450; clarify by a sample.
- Woven weaves: plain is the simplest and the densest, it creases more; twill gives a diagonal rib, is stronger and drapes better (jeans, workwear); satin gives a smooth lustrous face and is prone to snags. Knits: single jersey stretches in width and curls at the edge, rib stretches a lot, interlock is denser and more stable, fleece-back has a looped or brushed reverse.
- The fabric width is the usable width between the selvedges; it differs between woven and knitted fabrics, and the marker and the consumption depend on the width (see the document on cutting and the fabric specification calculation).
- Brand: approve a fabric by a sample stating the composition, the density, the width and the tolerances (set the density tolerance in the brief, for example an illustrative plus or minus 5%), and keep the reference sample until the end of the deliveries.
- Retailer: the customer perceives density and composition as a “light” or a “heavy” fabric: check whether the garment matches the description in the card (thickness, weight), otherwise returns by expectation grow.
Shrinkage and dimensional stability
- Shrinkage is the change in length and width after wet treatment (washing, steaming). It is measured on a sample before cutting: a square is marked on the fabric, treated by the care conditions and measured again; shrinkage in percent equals the difference of the lengths before and after divided by the length before.
- Skew means that the warp and weft threads stop being perpendicular after washing and a side seam “travels” forward or back; in knits the loop courses behave like this. The skew tolerance is set by the technical brief.
- The tolerances for shrinkage and skew are not universal: they are set by the technical brief and the contract by the type of garment and the care conditions, and the measurement methods are taken from the current standards (check the current GOST and ISO standards for determining dimensional change after wet treatments).
- Brand: test shrinkage on every lot of fabric before cutting, enter the result in the cutting card and put shrinkage into the consumption (see the fabric specification calculation).
- Retailer: the customer sees shrinkage after the first wash; send a garment sample from the lot for a test wash and keep the result: it is the basis of a claim to the supplier.
Trims and findings
- Zipper: the elements are coil, molded plastic teeth and metal; the zipper number roughly corresponds to the width of the closed teeth in millimeters (3, 5 and so on): the larger, the stronger and heavier. It is chosen by the fabric and the load and checked for slider travel and washing resistance.
- Buttons are measured in lignes: one ligne equals 0.635 mm (24 lignes about 15 mm). The diameter, the attachment and the resistance to washing and cleaning are checked, and for children’s clothing the safety of the attachment.
- Threads, elastics, tapes, cords, eyelets, snaps and rivets are chosen by the fabric and the load: a thread must withstand washing and give a seam without puckering, an elastic must keep its stretch after washes.
- Interlining (fusible or not) gives shape to the parts: the bond to the fabric, peeling after washing, glue strike-through and the shrinkage of the interlining against the shrinkage of the fabric are checked; an incompatible interlining gives bubbles.
- Brand: agree the trims by a sample and by the minimum lot (it is often larger than the need of a small collection) and order them before the fabric: the lead times for trims are often longer.
- Retailer: trims are a frequent reason for returns (a torn-off button, a stuck zipper): on acceptance check the zipper travel and the button attachment on a sample and keep returns by type of trim.
Fabric defects and roll acceptance
- Typical fabric defects: holes and punctures, snags, thick and thin yarns, broken threads, stains and oil marks, streaks, shade variation along the length, across the width and from selvedge to selvedge, creases and fold marks, undyed spots, skew, an uneven selvedge.
- The four-point score used in many contracts: a defect receives from one to four points by size. A common grading: up to 7.6 cm one point, up to 15.2 cm two, up to 22.9 cm three, over 22.9 cm or a hole four. The points on a roll are summed and brought to an area: points per 100 square yards equal the sum of points multiplied by 3,600 and divided by the length in yards and the width in inches. The grading and the tolerance are set by the contract; the reference gives them as an illustrative example.
- The points limit is not normative: in practice about 40 points per 100 square yards is often found as the upper limit for a roll (unverified: clarify with the supplier and in the contract; in the example it is an illustrative limit).
- The acceptance is set by the contract: the sample size (all rolls or a share), the method of inspection on an inspection machine under even light, a signed act and the claim period. Shade variation between rolls of one color is limited by cutting a garment from one roll or from rolls of one shade and keeping a shade tag.
- Brand: inspect the rolls of the main fabric before cutting on an inspection machine, mark the defects with tags, exclude defective areas in the marker and count the losses to defects in the consumption.
- Retailer: you do not accept fabric but you accept finished garments by sample and AQL (see the document on sampling inspection): fabric defects show up in the garment as stains, skew and shade variation between parts.
Where the data comes from
| Data source | Fields |
|---|---|
| The supplier’s specification and protocols | composition, density, width, shrinkage, color fastness, lot, date, roll number |
| The brand’s lab samples | shrinkage and skew by a lot sample, composition by an analysis, density by weighing a sample |
| Roll inspection | roll length and width, defects with sizes and points, the acceptance act, the decision |
| Finished garments and returns | the label, a sample wash, return reasons by type: fabric, trims, sewing |
How to build it step by step
- Step 1: Brand: approve the sample and the technical requirements (composition, density, width, shrinkage, tolerances, color) and enter them in the swatch and trim card.
- Step 2: Brand: before ordering ask the supplier for the specification and the test protocols of the lot and compare them with the requirements.
- Step 3: On arrival check the marking of the rolls, their number and length against the waybill and the condition of the packing.
- Step 4: Brand: take a sample and run a shrinkage and skew test under the care conditions of the garment.
- Step 5: Brand: inspect the rolls on an inspection machine, count the points and bring them to 100 square yards.
- Step 6: Compare the result with the tolerance of the contract and decide: accept, accept at a discount, return or replace; draw up an act.
- Step 7: Retailer: on a finished garment check the composition label, the care symbols and the appearance, arrange a sample wash.
- Step 8: Retailer: record defects and return reasons by type (fabric, trims, sewing) and pass them to the supplier with examples.
- Step 9: Keep the reference samples and the protocols until the end of the warranty period and update the reference after claims.
Formulas
| Measure | Formulas | Note |
|---|---|---|
| Weight of a running meter | g/m = density (g/m²) × width (m) | To compare prices by meters and by kilograms take one width. |
| Shrinkage | Shrinkage, % = (length before − length after) ÷ length before × 100 | Measured separately in length and in width on a sample from the lot. |
| Points per 100 square yards | Σ points × 3,600 ÷ (length in yards × width in inches) | Meters are converted to yards by dividing by 0.9144, centimeters to inches by dividing by 2.54. |
| Purchase consumption | Purchase consumption = consumption by the marker ÷ (1 − shrinkage in length) | Shrinkage goes into the fabric purchase and not into the marker. |
Formulas in notation
- Shrinkage and purchase consumption
s = (L_0 − L_1)/L_0, c_buy = c / (1 − s)
L_0 and L_1: the sample length before and after treatment; c: the consumption by the marker; c_buy: the consumption to be bought so that it is enough after shrinkage.
Worked example
A conditional inspection of five rolls of twill (150 cm × 60 m) by the four-point score, a limit of 40 points per 100 yd²
| Roll | Defects of 1 / 2 / 3 / 4 points, pcs | Points | Points per 100 yd² | Decision |
|---|---|---|---|---|
| Roll 1 | 9 / 3 / 1 / 0 | 18 | 16.7 | accept |
| Roll 2 | 14 / 6 / 2 / 1 | 36 | 33.4 | accept |
| Roll 3 | 22 / 8 / 3 / 2 | 55 | 51.1 | return or discount |
| Roll 4 | 6 / 2 / 0 / 0 | 10 | 9.3 | accept |
| Roll 5 | 11 / 4 / 2 / 1 | 29 | 26.9 | accept |
Illustrative data. The lot gives about 28 points per 100 yd² on average, that is below the limit, but roll 3 exceeds it: by the contract the decision is by roll or by lot and this must be written in advance.
Figures
- Lower bound
- Upper bound
Data as a table
| Measure | Lower bound | Upper bound |
|---|---|---|
| Blouse | 60 | 120 |
| Shirting | 100 | 160 |
| Suiting | 180 | 320 |
| Heavy denim | 300 | 450 |
Illustrative guides of the surface density by fabric group. The lower and upper bound of the guide, g/m². It is a language for a talk with a supplier and not a norm: density is checked on a sample.
- Points per 100 yd²
- Illustrative limit
Data as a table
| Measure | Points per 100 yd² | Illustrative limit |
|---|---|---|
| Roll 1 | 16.7 | 40 |
| Roll 2 | 33.4 | 40 |
| Roll 3 | 51.1 | 40 |
| Roll 4 | 9.3 | 40 |
| Roll 5 | 26.9 | 40 |
Points per 100 square yards by roll and the illustrative limit. Roll 3 exceeds the limit and the others are within it; the lot is on average below the limit. It must be settled in the contract: to judge the roll or the lot.
Incoming fabric control: from arrival to a decision. First the documents and samples, then the roll inspection; the result is compared with the tolerance of the contract and recorded in an act.
- Arrival and documents → Sample: shrinkage, skew, composition
- Sample: shrinkage, skew, composition → Roll inspection and points
- Roll inspection and points → Comparison with the tolerance
- Comparison with the tolerance → Accept, discount, return
- Accept, discount, return → Act and to cutting
- Act and to cutting
Specifics by category
- Apparel
- Apparel: fabric and trims are the main sources of defects; check shrinkage, skew and shade variation before cutting and for garments with elastane add a stretch and recovery test. For outerwear check the lining and the interlining separately: they shrink differently from the shell.
- Footwear
- Footwear: instead of fabrics the upper is leather, artificial leather and textile, with a sole and trims; leather defects (marks, creases, uneven thickness) are assessed by grade and cutting per part and not by points per yard; many acceptance rules are their own.
- Accessories
- Accessories: bags, belts, scarves and jewelry; for textile accessories the reference applies as is, for leather and metal ones the priority is grade, coating and the attachment of hardware. For bags add a check of edge abrasion and seam strength, for jewelry the durability of the coating.
- Kids
- Children’s: the safety requirements are stricter: trims must be firmly attached, cords and small parts are regulated by a separate regulation for children’s products; shrinkage and color fastness are more critical because of frequent washing.
- Men
- Men’s: more dense fabrics, suiting and denim, where the density, the weave and dimensional stability matter; trims (zippers, buttons) are loaded more; shade variation between parts is more visible on dark colors. For suiting fabrics add a check of fit and stability after steaming.
- Women
- Women’s: more thin and knitted fabrics, viscose and blends with elastane; skew, snags and transparency are more frequent; on light and printed fabrics the pattern defects and undyed spots are more visible. For viscose and knits a test of shrinkage and skew before cutting every lot is mandatory.
Common mistakes
- Brand: a sample is approved but a “similar” fabric is ordered → the lot has a different density and shrinkage → in the order refer to the sample and the lot protocol and check by a test.
- Brand: shrinkage is not measured but taken from a catalog → garments shrink after washing and the marker does not fit → test the lot and put shrinkage into the consumption.
- Retailer: garments are accepted without a sample wash → the customer finds shrinkage and skew → wash a sample from the lot before display and keep the result.
- Retailer: return reasons are written as “defect” without a type → the supplier does not see what to fix → record the type: fabric, trims, sewing, size.
- It was not agreed in the contract whether to judge the roll or the lot → a dispute about whether to accept a roll above the limit → write the unit of assessment, the limit and the method of inspection in advance.
Russian specifics
- TR CU 017/2011 “On the safety of light industry products”: the marking requirements, including the raw material composition and care symbols; it applies to light industry products imported into and circulating in the EAEU. Rule: CU Commission decision 876 of 09.12.2011: TR CU 017/2011 on safety of light-industry products (Customs Union Commission Decision of 09.12.2011 No. 876).
- GOST ISO 3758: the care symbols for textile products on the label; the symbols on the label must match the real conditions under which the shrinkage test was carried out. Rule: GOST ISO 3758: GOST ISO 3758 (care labeling symbols for textiles).
- For products for children and teenagers a separate regulation applies (TR CU 007/2011), including the safety of trims and materials: check its applicability to your item. Rule: CU Commission decision 797 of 23.09.2011: TR CU 007/2011 on safety of products for children and adolescents (Customs Union Commission Decision of 23.09.2011 No. 797).
- Brand: the methods for determining density, shrinkage, skew, color fastness and strength are set by standards (GOST, GOST ISO, ISO); check the numbers and editions against the current list, Lab does not give them as a fact, unverified.
- Retailer: the seller answers for the garment in circulation having the marking required by the regulation; on acceptance compare the label and the supplier’s documents, check disputed cases with a lawyer, unverified.