Syntha Lab RU

Samples and lab tests (sampling)

The chain of samples from prototype to production sample, plus lab checks of fabric and color. The brand uses it to decide whether to release the style into production, what to fix in fit and color, and how much cost and time the preparation takes before the first factory order.

Production, logistics, channels Brand and retail Verified: 2026-11-14

Open interactively →

Why this document

A series cannot be released on a nice sketch: a fit or shrinkage error found after cutting costs the whole batch. So the product manager, technologist and purchasing decide from samples what to change, whether to proceed and whether the style fits the collection calendar. Lab tests exist because color fastness and shrinkage are invisible by eye, and a retailer or customer claim later is paid for by the brand. Each sample therefore records a result and a decision, otherwise the same remarks come back on the next round.

At a glance

What is this document and why is it needed?
The chain of samples from prototype to production sample, plus lab checks of fabric and color. The brand uses it to decide whether to release the style into production, what to fix in fit and color, and how much cost and time the preparation takes before the first factory order.
Who owns the document and how often is it rebuilt?
Run by the technologist and product manager; the sample calendar sits inside the collection calendar; the result of every sample goes into the style card and is approved by the head of product.
What mistakes are the most common?
Approving color from a photo or screen → metamerism and a mismatch in store → view the lab dip under several lights and keep a reference. Skipping the size set → grading does not work at the extreme sizes → test at least the extremes and the middle. Not recording the tech pack version on the sample → unclear what was checked → record the version in the sample log.

For whom

Brand
The brand pays for samples, writes the comments and carries the risk of late approval: every extra fit round pushes production start and delivery. The sample budget goes into collection cost and sample lead time into the critical path.
Retail
A retailer sees samples only at the pre-order and in the showroom (collection samples) and for private label. For bought-in goods it checks a sample from the delivery at receipt and asks the supplier for lab reports; for its own label it runs the chain exactly like a brand.

What it consists of

1. Types of samples

  • Proto: the first sample on a cheap or analog material; checks silhouette and construction, color and fabric quality are not approved.
  • Brand: Fit sample: on the real fabric, base size, fitted on a dummy and a model; the goal is to correct measurements and fit; usually 1–3 rounds.
  • Size set: samples across the size range (at least the extremes and the middle), checking grading and fit in each size.
  • Brand: PP (pre-production): the pre-series sample on approved materials and trims made in the real process; the brand signs it as the reference.
  • TOP (top of production): samples from the first units of the series; confirm the series matches PP.

2. Color: lab dip and metamerism

  • Lab dip: a dyeing sample matched to the reference color (Pantone, fabric swatch); usually 3 attempts A, B, C.
  • Assessment in several light sources (daylight, store light, incandescent): metamerism — colors match under one light and diverge under another.
  • Color tolerance is expressed numerically (ΔE) or by a gray-scale rating and fixed in the contract; the tolerance between fabric lots (dye lot) is set separately.

3. Fabric and garment lab tests

  • Shrinkage (dimensional change on washing and ironing): a mark on the fabric, measured before and after washing by the method named in the contract.
  • Pilling: abrading the specimen and comparing with a reference scale.
  • Color fastness to washing, rubbing, perspiration and light: assessed on the gray scale.
  • Seam strength, tear load, fibre composition, water repellence, and for footwear sole abrasion and attachment strength.

4. Sample log

  • Style, sample type, dates sent and received, tech pack version, decision (approve, correct, reject), remarks on measurement, color, fabric and trims, owner.

What samples demand from each side

  • Brand: orders and pays for samples, signs the PP as the reference and bears the risk of late approval: every extra fit round delays production start.
  • Retailer: for private label runs the sample chain as a brand; for bought-in goods takes a sample from the batch on receipt and compares it with the supplier reference and test reports.

Fabric test method numbers (for ordering from a laboratory)

  • Washing and dimensional change: ISO 6330 (domestic washing and drying at a set program), measured before and after; pilling: ISO 12945-2 (Martindale method); color fastness: the ISO 105 series (washing, rubbing, perspiration, light); tensile strength of fabric strips: ISO 13934-1.
  • The numbers are given from general industry knowledge; the edition of the standard, the Russian GOST analog and the tolerance go into the contract and the laboratory order; the standard texts were not opened in Lab.

Brand and retailer: what differs in practice

  • Retailer: for a private label approves fit samples and the pre-production sample on its own fit and customer body and signs the standard before the lot is sewn.
  • Retailer: puts the sample time into the buying calendar: a late sample shifts delivery and the season window on the shelf.
  • Retailer: pays for samples under the factory contract or includes them in the lot price: records the terms before starting.
  • Retailer: uses production samples (TOP) as the receiving standard at the warehouse and for quality disputes.
  • Retailer: stores and checks the color standard under several light sources: a color mismatch in the store is a claim that must be proved.
  • Retailer: limits the number of fit rounds in the contract: each extra round is time and money, not only factory work.
  • Retailer: takes sample photos for the catalog and cards from the approved sample, not from the prototype.

How to read the result and what decisions follow

  • The critical path is the chain of fit rounds: reduce the number of rounds, not the length of one, and launch lab dips together with the prototype.
  • Compare sample cost per collection with collection revenue: if samples cost more than the expected margin of a style, drop the style before sewing.
  • Decision: a calendar with a last-approval date, a round limit and a sample budget for the season.

Control checks

  • The sum of stage durations including rounds equals the time to TOP in the calendar and the delivery date is no earlier than this plus production time.
  • Each approved sample has a date, tech pack version and signature and the standard is kept until the end of the lot warranty term.

Where the data comes from

Data sourceFields
Tech pack and collection calendarversion, measurement chart, BOM, sample deadlines
Factory and laboratorydispatch dates, test reports, sample price, remarks
Fit sessionphotos, sample measurements, pattern-maker and model comments, decisions
Buying and financesample budget, actual costs, courier and customs costs (for overseas samples)

How to build it step by step

  1. Brand: Step 1: Set the number and type of samples per style by brand rule (a proven block — one fit, new silhouettes — two); put them in the collection calendar.
  2. Brand: Step 2: Send the tech pack and the target color; record the version so the sample and the document can be matched.
  3. Brand: Step 3: Run lab dips in parallel with the proto so that color does not become the bottleneck.
  4. Brand: Step 4: Run the fit session on a single sheet: measurements against the chart, front, back and side photos, comments for each point with its tolerance.
  5. Step 5: After corrections approve the base size and launch the size set; check grading on the extreme sizes, not only the middle.
  6. Brand: Step 6: Before PP get the fabric test reports: shrinkage, color fastness, pilling; enter the result and tolerance in the log.
  7. Brand: Step 7: Sign PP as the reference; the factory keeps it, one copy stays with the brand.
  8. Step 8: After the series starts compare TOP with PP on measurement, color and finish; discrepancies are recorded in a report and decide whether to stop the series.
  9. Brand: Step 9: Summarize: sample costs per style and per collection, number of fit rounds, delays; carry over to the next season budget.

Formulas

MeasureFormulasNote
Brand: Sample cost per styleΣ over stages (sample count × sample price × number of rounds) + lab dipsFor fit use the historical average number of rounds; include courier and customs.
Brand: Style preparation lead timeΣ days of stages on the critical path; lab dips run parallel to the proto and are not on the path if they fit the timeAdd the days for shipping samples between the brand’s country and the factory.
ShrinkageShrinkage, % = (length before − length after) ÷ length before × 100A minus sign means growth; shrinkage along warp and weft is computed separately.
Measurement deviationDeviation = sample measurement − chart measurement; accepted if |deviation| ≤ toleranceCompute for every point; one point out of tolerance is not offset by the others.

Formulas in notation

Stage cost
S_j = q_j × p_j × k_j
q quantity, p price per sample, k number of rounds (for fit 2.2).
Collection sample cost
S = N × (Σ S_j + Σ lab dips)
N number of styles. Example: 40 × 24,110 = RUB 964,400.
Time to the production sample
T = Σ d_j × k_j (lab dips in parallel)
Example: 60.4 days; lab dips add no time if launched at once.
Sample shrinkage
s = (L_before − L_after) / L_before
Example: 2.8% for a 100 cm sample.

Worked example

Sample budget and lead time per style and for a 40-style collection

StagePiecesPrice, RUBRoundsCost, RUBDays
Prototype (proto)13,5001.03,50010.0
Fit sample12,8002.26,16026.4
Size set samples51,9001.09,50014.0
Pre-production sample (PP)31,2001.03,6007.0
Top of production (TOP)501.003.0
Lab dips (3 color attempts, run in parallel)345011,3500.0
Total per style24,11060.4
Total for a 40-style collection964,400

Samples for one style cost RUB 24,110 and preparation takes 60.4 days in sequence (lab dips run in parallel and do not extend it). For a collection of 40 styles the sample budget is RUB 964,400; with three fit rounds instead of an average 2.2 it would grow by RUB 89,600 and lead time by 9.6 days per style. A 100 mm mark after washing measures 97.2 mm, i.e. 2.8%; that shrinkage is built into the cut along the warp.

Figures

Sample calendar of one style: from prototype to TOP. Stages run in sequence, lab dips in parallel; the fit sample repeats several times so it takes the most time. Total 60.4 days to the sample from production. Durations are illustrative.

StageStart, daysLength, days
Prototype (proto)010
Fit sample1026.4
Size set samples36.414
Pre-production sample (PP)50.47
Top of production (TOP)57.43
Lab dips (in parallel)06
Sample cost by stage per style
Bar chart: Prototype (proto) 3,500, Fit sample 6,160, Size set samples 9,500, Pre-production sample (PP) 3,600, Top of production (TOP) 0, Lab dips 1,35002,0004,0006,0008,00010kPrototype (proto)Prototype (proto)Cost, RUB: 3,5003,500Fit sampleFit sampleCost, RUB: 6,1606,160Size set samplesSize set samplesCost, RUB: 9,5009,500Pre-production sample (PP)Pre-productionsample (PP)Cost, RUB: 3,6003,600Top of production (TOP)Top of production(TOP)Cost, RUB: 00Lab dipsLab dipsCost, RUB: 1,3501,350RUB
Data as a table
MeasureCost, RUB
Prototype (proto)3,500
Fit sample6,160
Size set samples9,500
Pre-production sample (PP)3,600
Top of production (TOP)0
Lab dips1,350

Sample cost by stage per style. The stage cost is quantity times price times rounds; the fit sample is costly because of repeats. Per style RUB 24,110, for a collection of 40 styles RUB 964,400.

Specifics by category

Apparel
Apparel: the main risk is fit and grading; fit and size set are mandatory, especially for knitwear (stretch) and outerwear (shoulder and sleeve fit).
Footwear
Footwear: samples are more expensive and slower because a last and tooling are needed; wear fit on the foot for each last, then size-range samples; testing of sole, attachment and flex is mandatory. A new last is a separate cost.
Accessories
Accessories: there is no size range, but strength tests (handles, hardware), color fastness, odor and dye migration of leather and faux leather are needed; usually one or two sample rounds.
Kids
Kids: its own safety requirements (small parts, cords, chemicals); samples are checked against the age table and tests are done in an accredited laboratory.
Men
Menswear: fewer silhouettes but higher fit stability requirements; the fit session is usually simpler while the size set is wider (more sizes per grid).
Women
Womenswear: more fit rounds because of figure and silhouette variety; double fit on a model and a dummy is common, and the size grid and vanity sizing need checking against the chart.

Common mistakes

  • Approving color from a photo or screen → metamerism and a mismatch in store → view the lab dip under several lights and keep a reference.
  • Skipping the size set → grading does not work at the extreme sizes → test at least the extremes and the middle.
  • Not recording the tech pack version on the sample → unclear what was checked → record the version in the sample log.
  • Testing fabric after cutting → shrinkage found on finished garments → test and adjust the cut before PP.
  • Counting only the sample price and not delivery and time → budget and schedule slip → include courier, customs and days in the calendar.

Russian specifics

  • Samples imported from abroad pass customs (HS code and duty rate); simplified procedures or temporary import apply; confirm the procedure with the broker. Rule: EEC decision 80 of 14.09.2021: EEC Council Decision of 14.09.2021 No. 80 (EAEU commodity nomenclature and Common Customs Tariff).
  • Test reports for conformity confirmation are accepted from accredited laboratories; see TR CU 017/2011 and TR CU 007/2011 for laboratory lists and conformity schemes. Rule: CU Commission decision 876 of 09.12.2011: TR CU 017/2011 on safety of light-industry products (Customs Union Commission Decision of 09.12.2011 No. 876).
  • Fabric test methods (shrinkage, pilling, color fastness) follow the ISO or GOST standards named in the contract; there is no single mandatory method for all products.
  • Methods: ISO 6330, ISO 12945-2, the ISO 105 series, ISO 13934-1 (numbers from general knowledge; check editions and Russian analogs before ordering tests).

Open interactively →