Syntha Lab RU

Tech pack (product technical dossier)

The single document handed to the factory: sketch, composition, measurement chart, bill of materials, construction, details, packaging and version. The factory sews from it, the brand approves samples and costs the product from it; without it every error becomes an argument about who meant what.

Production, logistics, channels Brand and retail Verified: 2026-11-14

Open interactively →

Why this document

A factory sews exactly what is written, not what the designer meant. So the tech pack is read by the technologist, purchasing and the factory itself: the first checks a sample against the measurements, the second takes consumption and builds the cost, the third plans cutting. Without it a sample arrives with a different fit or trims, and the blame argument is lost because no written requirement exists. It therefore has to exist before the first sample is ordered, and every change must go out as a new version so everyone works from the same edition.

At a glance

What is this document and why is it needed?
The single document handed to the factory: sketch, composition, measurement chart, bill of materials, construction, details, packaging and version. The factory sews from it, the brand approves samples and costs the product from it; without it every error becomes an argument about who meant what.
Who owns the document and how often is it rebuilt?
Maintained by the brand designer and technologist (or product manager), one document per style-color, with strict versioning. Approved by the head of product, sent to the factory with the sample order; buying takes consumption and the bill of materials from it for costing.
What mistakes are the most common?
Measurement chart without tolerances → the factory sews “about right” and the inspection ends in a dispute → state ± for every point and the measuring method. Fabric consumption guessed → cost is wrong and buying is off by a meter → take consumption from the marker at the real fabric width. Several versions in chats → the factory sews from an old one → a single document with a change log and date; mark old ones “superseded”.

For whom

Brand
A brand with its own production or factory orders: the tech pack is the primary carrier of responsibility. All critical parameters (measurements, fabric, tolerances, trims, packaging) are fixed here, and samples, pre-production samples and the batch inspection are checked against it. The brand is also responsible for labeling and composition compliance.
Retail
A retailer buying finished goods does not write a tech pack. It is needed in three cases only: private label, made-to-sample orders and exclusive capsules. Then the retailer acts as a brand; for bought-in assortment it takes the supplier specification and certificates instead and requires comparable data in the product card.

What it consists of

1. Cover and version

  • Style code, name, season and drop, category, gender and age, size range, colors; the style code matches master data (the Products template).
  • Version (v1, v2…), date, author, status (draft, for sample, approved); the change log records what was changed, why and who approved.
  • Brand: Target retail price, wholesale price and target cost: the factory sees the frame and does not propose materials outside the budget.

2. Sketch and construction

  • Flat sketch front, back, side; separate views of complex details; color and layout of the print or pattern.
  • Cutting details: pattern pieces with seam allowances and grain direction; stitch density (stitches per cm), seam and thread type, bar-tack positions.
  • Details: collar, placket, pocket, cuff, waistband, closure; each with its own drawing and tolerance.

3. Measurement chart (POM) and grading

  • Points of measure (chest width, waist, hip, back length, sleeve length, shoulder…): code, description, how to measure.
  • Base size, grading step per size, tolerance (±), result per size; for footwear the foot length, girth and instep height instead.

4. Bill of materials (BOM)

  • Fabric: composition, width, weight g/m², supplier, color code, shrinkage and fastness; every line with net consumption and a loss allowance.
  • Trims: zips, buttons, snaps, tapes, padding; size, color, brand; each with quantity per unit.
  • Brand: Labels: main, composition and care (care symbols per ISO 3758), size, hangtag; marking (Data Matrix) is specified separately.

5. Packaging and logistics

  • Folding method, bag, card, hangtag, inserts, quantity per carton, packaging weight and dimensions (needed for logistics and delivery costing).

6. Quality requirements

  • Acceptable defects, AQL level and inspection plan, fabric tests (shrinkage, pilling, color fastness), certificates and reports.

Brand and retailer: who writes and who reads the tech pack

  • Brand: writes the tech pack, keeps versions and the change log, is responsible for label and composition compliance; the factory works only from the approved version.
  • Retailer: does not write a tech pack for bought-in range but requires the brand specification, measurements and certificates and checks them against the product card; for private label writes it as a brand.
  • Brand: for footwear states the size system explicitly: Paris point (EU, 2/3 cm step) or Mondopoint (ISO 9407, foot length in mm): these are different systems and are not mixed in one document.
  • Retailer: for marked goods checks that the card has room and data for the marking code, otherwise receiving and selling will stop.

Brand and retailer: what differs in practice

  • Retailer: for a private label writes the tech pack itself or receives it from the supplier and approves it: measurements, fabric, trims and marking are fixed before ordering.
  • Retailer: compares cost from the bill of materials with the supplier purchase price to see the factory margin and room to negotiate.
  • Retailer: uses the measurement chart as the basis of lot acceptance: without it a fit claim cannot be proved.
  • Retailer: requires composition and care in the tech pack before receipt so that labels and marking at the warehouse match the goods.
  • Retailer: on a change of fabric or factory asks for a new tech pack version and re-approval, not an oral agreement.
  • Retailer: builds the product card and site description from the tech pack so that composition, sizes and care on the shelf and in the card do not diverge.

How to read the result and what decisions follow

  • If fabric takes the main share of cost, negotiate the price per meter and cutting, not sewing: savings on sewing are small.
  • A margin on cost below plan means the price or fabric needs revision before the style goes to production.
  • Decision: approve the tech pack version, fix tolerances and shrinkage, name the person responsible for changes.

Control checks

  • The sum of the bill of materials lines plus sewing equals the unit cost in the style card.
  • The nominal of a size plus the grading step equals the nominal of the next size and the tolerance is the same for all sizes of one point.

Where the data comes from

Data sourceFields
Design team and PLMsketch, patterns, detail names, versions, color cards, fabric swatches
Pattern maker and technologistmeasurement chart, grading, production sequence, fabric consumption from the marker
Material supplierscomposition, width, weight, price per meter, minimum order, lead time, test reports
FactoryCMT price, line capacity, lead time, manufacturability remarks, actual consumption
Buying and financetarget price, target cost, exchange rate, duty rates (for imports)

How to build it step by step

  1. Brand: Step 1: Create the style card with the code from master data and the target price; no tech pack goes to the factory without a target cost.
  2. Step 2: Draw the flat sketch and mark the details; attach a close-up and a tolerance to each one.
  3. Step 3: Build the measurement chart for the base size from the reference pattern or an analog sample, then set the grading step and tolerance; check that steps are consistent.
  4. Step 4: Assemble the BOM: fabric with width and composition, trims, labels; take net consumption from the marker, not by eye.
  5. Step 5: Add the loss allowance (edges, fabric flaws, pattern matching) and cost the materials; add the CMT price.
  6. Step 6: Set the quality requirements: AQL, fabric tests, tolerances; refer to the sampling inspection section.
  7. Brand: Step 7: Describe packaging and marking: labels, care symbols, carton size, weight; for goods under mandatory marking indicate where the code goes.
  8. Brand: Step 8: Run the internal check: the technologist cross-checks measurements against sibling styles, buying recomputes cost, legal or compliance checks composition and labels.
  9. Brand: Step 9: Assign a version and send the PDF with the change log to the factory; the factory confirms receipt and returns manufacturability remarks.
  10. Brand: Step 10: On every sample compare measurements with the chart and fabric and trims with the BOM; record every discrepancy in a new version rather than in chat.

Formulas

MeasureFormulasNote
Brand: Gross consumptionGross consumption = net consumption × (1 + loss allowance, %)Compute the allowance on net and fix a single rule for all styles: mixing “on net” and “on gross” produces a cost gap.
Brand: Fabric consumption from the markerConsumption per unit = marker length ÷ units in the markerMarker length depends on fabric width: recompute when the width changes.
Brand: GradingMeasurement(size k) = measurement(base) + k × grading stepk is negative for sizes below the base. The step can differ by point (chest grows faster than length).
Brand: Unit costUnit cost = Σ(gross consumption × material price) + CMT price + packagingFor an imported item add freight and duty; see the full-cost calculation in the sourcing document.
Brand: ShrinkageShrinkage, % = (size before wash − size after) ÷ size before × 100Tested on a 50×50 cm mark; shrinkage is built into the cut, otherwise the size will shrink at the customer.

Formulas in notation

Gross material consumption
g = a × (1 + p / 100)
a net consumption, p loss allowance in percent. Fabric: 1.60 × 1.08 = 1.728 m.
Unit cost
C = Σ g_i × c_i + CMT
c_i material price. Example: 1,532.6 + 780 = RUB 2,312.6.
Shrinkage
s = (L_before − L_after) / L_before × 100%
A 50 × 50 cm swatch after washing is 48.6 cm: 2.8%. The pattern allowance is added on top of shrinkage.
Measurement tolerance
|M_act − M_chart| ≤ t
Every point is checked; one point out of tolerance is not offset by the others.

Worked example

Women’s wool-blend dress: bill of materials and unit cost

MaterialUnitNetLossGrossPrice, RUBCost, RUB
Main fabric (wool blend, 150 cm wide)m1.608%1.736201,071.4
Liningm1.205%1.26210264.6
Fusible interliningm0.454%0.479544.5
Concealed zippcs1.002%1.023838.8
Buttonspcs4.003%4.121249.4
Thread (set)set1.000%1.002424.0
Main label, composition, careset1.000%1.001818.0
Packaging (bag, card, hangtag)set1.000%1.002222.0
Materials total1,532.6
Cut-make-trim (CMT), RUB per unit780.0
Unit cost2,312.6

Gross fabric consumption is 1.728 m; materials of RUB 1,532.6 and CMT of RUB 780 give a unit cost of RUB 2,312.6. Fabric is 46.3% of cost, so negotiating the price per meter pays more than negotiating CMT. At a wholesale price of RUB 4,400 the brand margin on cost is 47.4%. Measurement chart for base chest 96 cm: grading step 4 cm, tolerance ±1 cm, so the next size up is 100 cm (acceptable 99–101 cm). A 50×50 cm swatch shrinking to 48.6 cm gives 2.8%.

Figures

What the unit cost consists of
Waterfall: Main fabric (wool blend, 150 cm wide) +1,071, Lining +265, Fusible interlining +44.5, Concealed zip +38.8, Buttons +49.4, Thread (set) +24, Main label, composition, care +18, Packaging (bag, card, hangtag) +2205001,0001,5002,0002,500Main fabric (wool blend, 150 cm wide)Main fabric (woolblend, 150 cm wide)Main fabric (wool blend, 150 cm wide): +1,071+1,071LiningLiningLining: +265+265Fusible interliningFusible interliningFusible interlining: +44.5+44.5Concealed zipConcealed zipConcealed zip: +38.8+38.8ButtonsButtonsButtons: +49.4+49.4Thread (set)Thread (set)Thread (set): +24+24Main label, composition, careMain label,composition, careMain label, composition, care: +18+18Packaging (bag, card, hangtag)Packaging (bag,card, hangtag)Packaging (bag, card, hangtag): +22+22Cut-make-trim (CMT)Cut-make-trim (CMT)Cut-make-trim (CMT): +780+780Unit costUnit costUnit cost: 2,3132,313RUB
  • positive
  • negative
  • total
Data as a table
StepChangeLevel
Main fabric (wool blend, 150 cm wide)+1,0711,071
Lining+2651,336
Fusible interlining+44.51,381
Concealed zip+38.81,419
Buttons+49.41,469
Thread (set)+241,493
Main label, composition, care+181,511
Packaging (bag, card, hangtag)+221,533
Cut-make-trim (CMT)+7802,313
Unit cost—2,313

What the unit cost consists of. Materials by the bill with a loss allowance and cut-make-trim (CMT): each bar is a tech pack line. Fabric is 46.3% of cost; at a wholesale price of RUB 4,400 margin on cost is 47.4%. Illustrative figures.

Measurement chart: tolerance around the nominal by size
Bar chart: Size -2 87, Size -1 91, Size +0 95, Size +1 99, Size +2 103020406080100120Size -2Size -2Lower limit, cm: 87Nominal, cm: 88Upper limit, cm: 89Size -1Size -1Lower limit, cm: 91Nominal, cm: 92Upper limit, cm: 93Size +0Size +0Lower limit, cm: 95Nominal, cm: 96Upper limit, cm: 97Size +1Size +1Lower limit, cm: 99Nominal, cm: 100Upper limit, cm: 101Size +2Size +2Lower limit, cm: 103Nominal, cm: 104Upper limit, cm: 105cm
  • Lower limit, cm
  • Nominal, cm
  • Upper limit, cm
Data as a table
MeasureLower limit, cmNominal, cmUpper limit, cm
Size -2878889
Size -1919293
Size +0959697
Size +199100101
Size +2103104105

Measurement chart: tolerance around the nominal by size. Chest circumference by size at the grading step and tolerance; the garment is accepted if the measurement falls inside the corridor.

T-shirt: measurement points. T-shirt spec: widths are taken on the flat garment, lengths along seams.

Trousers: measurement points. Trouser spec: waist, hip, rise, seams and leg opening.

Jacket: measurement points. Jacket spec: chest, length, shoulders, sleeve, cuff and hem.

Pattern layout on fabric. Pieces are laid along the grain and close together so less fabric is wasted.

Specifics by category

Apparel
Apparel: the center of the document is the measurement chart and marker (fabric consumption), details and seams. For knitwear add stitch density, loop and stretch; for outerwear the insulation and lining. Test shrinkage and curling before cutting.
Footwear
Footwear: instead of apparel measurements the document describes the last (foot length, width, instep height, toe and heel), the sole (material, tread, hardness, heel height), the upper (parts, material, lining, insole), the attachment method (cemented, injection, Goodyear stitch) and hardware. Different lasts for size ranges and gender; changing the last changes the fit, so the last version is part of the tech pack.
Accessories
Accessories: bags and belts specify dimensions folded and open, parts (handles, hardware, lining), load tolerances and tests (handle strength, paint fastness); for jewelry the alloy and plating, for scarves the size and edge. Size grading is usually absent: one size.
Kids
Kids: grading follows an age and height table rather than adult size steps; safety requirements are added (cords and drawstrings, small trims, loose ends) per TR CU 007/2011, together with tighter tolerances for shrinkage and bar-tacks.
Men
Menswear: the focus is on fit and measurement consistency between orders; tolerances are tighter on sleeve length and girth, and classic items add lining pattern and inside-finish technique.
Women
Womenswear: more silhouettes and finishes; grading by height and hip girth matters, as do sizing quirks (vanity sizing) and complex details (darts, draping). Several grading steps per point are more common.

Common mistakes

  • Measurement chart without tolerances → the factory sews “about right” and the inspection ends in a dispute → state ± for every point and the measuring method.
  • Fabric consumption guessed → cost is wrong and buying is off by a meter → take consumption from the marker at the real fabric width.
  • Several versions in chats → the factory sews from an old one → a single document with a change log and date; mark old ones “superseded”.
  • Ignoring shrinkage and pilling → garments shrink at the customer and returns rise → test the fabric before approval and build a shrinkage allowance into the cut.
  • Label and composition do not match the fabric → risk of fines and withdrawal from sale → check composition against the supplier report and the labeling requirements.
  • No manufacturability feedback from the factory → the sample is approved but the series cannot be made → get the factory technologist’s written answer before approval.

Russian specifics

  • In the EAEU apparel and footwear fall under TR CU 017/2011 (composition, marking and safety in documents and on the label); children’s goods under TR CU 007/2011. Conformity is confirmed before the batch is released. Rule: CU Commission decision 876 of 09.12.2011: TR CU 017/2011 on safety of light-industry products (Customs Union Commission Decision of 09.12.2011 No. 876).
  • Children’s products: separate requirements for cords, trims and materials, age and size marking. Rule: CU Commission decision 797 of 23.09.2011: TR CU 007/2011 on safety of products for children and adolescents (Customs Union Commission Decision of 23.09.2011 No. 797).
  • Marking with identification means (Data Matrix) for light-industry goods: the code position and data content are planned into the tech pack and label in advance. Rule: Decree 1956 of 31.12.2019: Government Decree of 31.12.2019 No. 1956 (marking rules for light-industry goods).
  • Care symbols on the label: ISO 3758; mandatory label information in Russia should be checked in TR CU 017/2011 for the specific category. Rule: GOST ISO 3758: GOST ISO 3758 (care labeling symbols for textiles) (rule check not completed).

Open interactively →