Syntha Lab RU

Product life cycle: a simplified assessment by five stages, emissions per wear and what a brand and a retailer should do with it

A review of a simplified life cycle assessment of an item on top of the carbon estimate up to the warehouse: use (washing and drying) and end of life (disposal or recycling) are added to material, production and transport, and the result is divided by the number of wears. The document shows what part of emissions falls on each stage, how to compare items of different durability and which levers really cut emissions per wear. It is a decision tool, not a public claim.

Brand, customer, organisation Brand and retail Verified: 2026-11-15

Open interactively →

Why this document

The calculation of emissions up to the warehouse shows only the beginning of an item’s life: after the sale it is worn, washed and thrown away or passed on. If items are compared by this beginning alone, a durable one loses because it has more material. The document introduces the unit “per wear” and shows when durability pays and which levers (durability, resale, care, composition) really work. It is needed by product and buying and by those who prepare data for partners and environmental claims, so as not to publish beautiful but unsupported numbers.

At a glance

What is this document and why is it needed?
A review of a simplified life cycle assessment of an item on top of the carbon estimate up to the warehouse: use (washing and drying) and end of life (disposal or recycling) are added to material, production and transport, and the result is divided by the number of wears. The document shows what part of emissions falls on each stage, how to compare items of different durability and which levers really cut emissions per wear. It is a decision tool, not a public claim.
Who owns the document and how often is it rebuilt?
Brand: the product and production director with buying and a sustainability specialist; retailer: the commercial director and buying for private labels; the calculation is made when choosing material and quality and revised yearly; the result goes to product, buying and the lawyer for checking claims.
What mistakes are the most common?
Comparing life emissions rather than per wear → a durable item “loses” → count per wear and the parity of wears. Taking the number of wears “from the head” → the conclusion rests on one figure → give a range and check sensitivity. Booking recycling as a big negative number → the result looks better than it is → a credit only with a written method.

For whom

Brand
The brand controls material, production and durability and sees the stages before the sale; use and end of life it only estimates. It needs to compare item variants per wear and to decide where durability, repair and resale give a gain.
Retail
The retailer sees sales, returns and resale but not the material and production: the data comes from brands. For private labels it sets material and quality itself and so counts like a brand, while for other brands it demands data for claims and answers to partners.

What it consists of

Five stages: what is included and where data comes from

  • Material: obtaining and processing fibers, yarns, fabrics, leather and trims per item. Data from the specification and material references; in the example 6.0 kg CO₂e per blouse. Most often the largest share, and it sets the levers of composition.
  • Production: sewing, finishing, dyes, packaging per item; data from the factory and from the calculation “Carbon estimate per item”. In the example 2.5 kg CO₂e. Take the benchmarks by stage from your own factory, not from others’ reports.
  • Transport: the path from the factory to the warehouse and to the customer including returns. In the example 2.0 kg CO₂e per item (warehouse 1.2 and customer 0.8); for resale reverse logistics is added.
  • Use: washing and drying over the whole life. One wash in the example is 0.19 kg CO₂e, over 15 washes 2.8 kg, that is 21% of the life. Data: electricity consumption, the share of drying, the number of items in a load, the grid factor.
  • End of life: disposal or recycling by the mass of the item and the recycling share. In the example 0.25 kg CO₂e. A credit for recycling is allowed only with a written method; without it take zero.

The unit of comparison: one wear

  • Emissions per wear equal life emissions divided by wears. For the basic blouse 13.6 kg CO₂e over 30 wears give 0.45 kg per wear.
  • The fixed part (material, production, transport, end of life) is divided by wears while use per wear barely changes. So the durable blouse has 0.26 kg per wear: 42% less than the base with more material.
  • Parity: the durable blouse needs 37 wears to match the base. If you realistically expect fewer, durability does not pay in emissions; give a range of wears, not one number.
  • Estimate the number of wears from customer surveys, resale and rental data and returns; it is the shakiest figure of the calculation and it needs a sensitivity check.

Levers and what they cost

  • Durability: quality, seams, fit and repairability raise the number of wears. The price: a more expensive material and production; check it by the parity of wears.
  • Resale and rental: a second owner adds wears at a small reverse logistics cost. In the example a blouse with two owners gives 0.30 kg per wear against 0.45 for the base.
  • Care: temperature, the number of washes, drying; the lever is visible where use exceeds 40% of life (underwear, sport, children’s), for jackets and coats it is small. The care label and repair are free levers.
  • Composition and material: the choice of fiber changes material and end of life, but the data on materials is incomplete: compare by one reference and one boundary.
  • Packaging and logistics: change transport and production but rarely more than 10–15% of an item’s life; do not start with them if the material gives more than half.

Brand: what to do

  • Brand: take the emissions of material, production and transport from the calculation “Carbon estimate per item” or from the factory and write down the source of each factor.
  • Brand: set the accounting boundary (which items, which stages, which unit) and do not change it between variants.
  • Brand: estimate wears and wears between washes from a customer survey and give a range; count the minimum, the base and the maximum.
  • Brand: compare variants per wear and by the parity of wears, not by life emissions.
  • Brand: put on the label and the site only what is backed by data and a description of the boundary; keep the rest for internal decisions.
  • Brand: count resale and repair as a way to raise wears: count reverse logistics and the share of items that really reach a second owner.
  • Brand: give EU partners the data by stage in their format; one item table saves hours.
  • Brand: recalculate yearly and when changing material or factory; factors change and old calculations become outdated.

Retail: what to do

  • Retail: for private labels count like a brand: the retailer sets material and quality and the responsibility for claims is its own.
  • Retail: for other brands ask for data by stage before buying and compare offers per wear, not by the item’s price.
  • Retail: count the number of wears from the network’s data on returns, resale and rental: returns and transport to the customer enter the transport stage.
  • Retail: build the logistics of resale and rental into the transport stage, otherwise the second life of an item looks free.
  • Retail: check the claims in listings and advertising against the boundary and the sources of factors; the responsibility for the publication lies with the retailer.
  • Retail: compare assortment variants per wear when choosing capsules and basic items, not only by margin.
  • Retail: fix in the contracts with brands the data format by stage and the reply deadline.
  • Retail: keep the data by version: a claim published a year ago must be backed by the same numbers.

What from the calculation can be said publicly

  • Publicly one can say what is backed by object (item or range), base (boundaries and unit) and period, with the source of factors. The simplified Lab calculation is fit for internal decisions.
  • General words (“eco”, “green”, “climate neutral”) without evidence are dangerous: in the EU these claims are checked under directive 2024/825, in Russia under the advertising rules.
  • The comparison “our item is better” is allowed only on one boundary and one unit with a description of the method; otherwise it misleads.

Where the data comes from

Data sourceFields
The calculation “Carbon estimate per item” and factory dataemissions of material, production and transport up to the warehouse per item, the source of each factor
Care and washing dataelectricity use of washing and drying, items per load, the share of drying, the grid factor, wears between washes
Customer surveys, resale, rental and returnsthe number of wears over the life, the number of owners, the share of items into a second life, reverse logistics
References on disposal and recyclingdisposal emissions per kilogram, the recycling share, the crediting method

How to build it step by step

  1. Step 1. Choose the items and variants to compare and set the accounting boundary and the unit: one wear.
  2. Step 2. Take the emissions of material, production and transport up to the warehouse per item and write down the source.
  3. Step 3. Calculate the emissions of one wash: the electricity of washing and drying per item, the grid factor and other emissions.
  4. Step 4. Calculate use: wears ÷ wears between washes × wash emissions.
  5. Step 5. Calculate end of life by mass and the recycling share; a credit only with a written method.
  6. Step 6. Add the stages, divide by wears, find the variant with the lowest emissions per wear and the parity of wears.
  7. Step 7. Check sensitivity: the minimum, base and maximum of wears, another grid factor.
  8. Step 8. Decide what goes into internal decisions and what (with the boundary and sources) into public claims and data for partners.

Formulas

MeasureFormulasNote
Emissions of one washw = (E_w ÷ n + d × E_d ÷ n) × g + pE_w and E_d are the electricity of washing and drying, n is items per load, d is the share of drying, g is emissions per kWh, p is other wash emissions.
Use and end of lifeU = (N ÷ v) × w; K = m × ((1 − s) × e_d + s × e_r)N is wears, v is wears between washes, m is mass, s is the recycling share, e_d and e_r are the emissions of disposal and recycling per kg.
Per wear and parityx = (F ÷ N) + w ÷ v; N* = F₂ ÷ (x₁ − w ÷ v₂)F is the fixed part: material, production, transport, end of life. N* is the number of wears of the second variant at which it matches the base x₁.

Formulas in notation

Per wear
x = F/N + w/v
F is the fixed part, N is wears, w is wash emissions, v is wears between washes.
Parity of wears
N* = F₂ / (x₁ − w/v₂)
The number of wears of the second variant at which it matches the base.

Worked example

Three blouse variants of a hypothetical label: emissions by stage, kg CO₂e (illustrative factors)

VariantMaterialProductionTransportUseEnd of lifeTotalPer wear
Basic blouse, 30 wears6.002.502.002.830.2513.580.45
Durable blouse, 80 wears7.803.202.007.550.2820.830.26
Basic, two owners, 55 wears6.002.502.705.190.2516.640.30

Parity: the durable blouse needs 37 wears to match the base. All numbers are illustrative.

Figures

Life emissions by stage, kg CO₂e
Bar chart: Basic blouse, 30 wears 6, Durable blouse, 80 wears 7.8, Basic, two owners, 55 wears 60510152025Basic blouse, 30 wearsBasic blouse, 30wearsMaterial: 6Production: 2.5Transport: 2Use: 2.83End of life: 0.2513.6Durable blouse, 80 wearsDurable blouse, 80wearsMaterial: 7.8Production: 3.2Transport: 2Use: 7.55End of life: 0.2820.8Basic, two owners, 55 wearsBasic, two owners,55 wearsMaterial: 6Production: 2.5Transport: 2.7Use: 5.19End of life: 0.2516.6kg CO₂e
  • Material
  • Production
  • Transport
  • Use
  • End of life
Data as a table
MeasureMaterialProductionTransportUseEnd of life
Basic blouse, 30 wears62.522.830.25
Durable blouse, 80 wears7.83.227.550.28
Basic, two owners, 55 wears62.52.75.190.25

Life emissions by stage, kg CO₂e. For all variants material and production give the main part; the durable blouse has more in production but they are divided over 80 wears (illustrative factors).

Emissions per wear by the number of wears, kg CO₂e
Line chart: Basic blouse, 30 wears: 1.17 → 0.18; Durable blouse, 80 wears: 1.42 → 0.2100.511.520406080100120Basic blouse, 30 wears, 10: 1.17Basic blouse, 30 wears, 20: 0.63Basic blouse, 30 wears, 30: 0.45Basic blouse, 30 wears, 40: 0.36Basic blouse, 30 wears, 50: 0.31Basic blouse, 30 wears, 60: 0.27Basic blouse, 30 wears, 80: 0.23Basic blouse, 30 wears, 100: 0.2Basic blouse, 30 wears, 120: 0.18Durable blouse, 80 wears, 10: 1.42Durable blouse, 80 wears, 20: 0.76Durable blouse, 80 wears, 30: 0.54Durable blouse, 80 wears, 40: 0.43Durable blouse, 80 wears, 50: 0.36Durable blouse, 80 wears, 60: 0.32Durable blouse, 80 wears, 80: 0.26Durable blouse, 80 wears, 100: 0.23Durable blouse, 80 wears, 120: 0.21kg CO₂e per wearWears over the life
  • Basic blouse, 30 wears
  • Durable blouse, 80 wears
Data as a table
Wears over the lifeBasic blouse, 30 wearsDurable blouse, 80 wears
101.171.42
200.630.76
300.450.54
400.360.43
500.310.36
600.270.32
800.230.26
1000.20.23
1200.180.21

Emissions per wear by the number of wears, kg CO₂e. The curves go down because the fixed part is divided by wears; the crossing of the curves is the parity of wears.

What the life of the basic blouse consists of, kg CO₂e
Waterfall: Material +6, Production +2.5, Transport +2, Use +2.83, End of life +0.25, Total 13.6051015MaterialMaterialMaterial: +6+6ProductionProductionProduction: +2.5+2.5TransportTransportTransport: +2+2UseUseUse: +2.83+2.83End of lifeEnd of lifeEnd of life: +0.25+0.25TotalTotalTotal: 13.613.6kg CO₂e
  • positive
  • negative
  • total
Data as a table
StepChangeLevel
Material+66
Production+2.58.5
Transport+210.5
Use+2.8313.3
End of life+0.2513.6
Total—13.6

What the life of the basic blouse consists of, kg CO₂e. Material, production, transport, use and end of life add up to the total over 30 wears; a guide for finding levers.

Specifics by category

Apparel
Apparel: material and production give the main share (about two thirds in the blouse example), so the levers are durability and resale; for underwear and sports items use is more notable.
Footwear
Footwear: count pairs and outsole wear, not washes; the material and sole are heavier, end of life is harder (glued joints), repair and sole replacement are the main lever.
Accessories
Accessories: there is no washing, use is near zero; the weight of stages is in material and production, and wears are estimated by service life, especially for bags and belts.
Kids
Children’s: the life is shorter but items are more often passed on to other children and resold; wears per owner are few, so count owners and passing on, not only wears.
Men
Men’s: suit and outer items are heavier and washed less often (many wears between washes), so use is small and material gives an even larger share.
Women
Women’s: more seasonal and trend items with few wears, so the effect of durability and resale is stronger; the number of wears per item is the shakiest.

Common mistakes

  • Comparing life emissions rather than per wear → a durable item “loses” → count per wear and the parity of wears.
  • Taking the number of wears “from the head” → the conclusion rests on one figure → give a range and check sensitivity.
  • Booking recycling as a big negative number → the result looks better than it is → a credit only with a written method.
  • Changing the accounting boundary between variants → the comparison is incomparable → one boundary, one unit and one reference.
  • Publishing the result as an environmental claim → the claim cannot be supported → separate the internal calculation from public claims with sources.

Russian specifics

  • The life cycle assessment method is set by the international ISO 14040 and 14044 standards, the product carbon footprint by ISO 14067; editions and applicability have not been checked (unverified). The simplified Lab calculation does not replace them.
  • Environmental claims in Russian advertising fall under the advertising law: untrue information is banned and supporting data must be held (unverified). Rule: Law 38-FZ of 13.03.2006: Federal Law of 13.03.2006 No. 38-FZ on advertising (rule check not completed).
  • For the EU, environmental claims are checked under directive 2024/825 (applies from 27.09.2026, not checked against the text of the act) (unverified).
  • EPR in Russia and in the EU takes account of the end of life of the item and packaging; rates and targets have not been checked against the texts of the acts (unverified). Rule: Law 89-FZ of 24.06.1998: Federal Law of 24.06.1998 No. 89-FZ “On production and consumption waste” (extended producer responsibility, Art. 24.2 ff.) (rule check not completed).

Open interactively →