Syntha Lab RU

Fashion tech: digital product passport, RFID, AR try-on, 3D design

The document helps decide which technologies to adopt and in what order: digital product passport, RFID, AR try-on, 3D design. For each it counts what it delivers (stock accuracy, fewer returns, fewer samples, compliance), what it costs and when it pays back, and how a pilot on a few sites differs from a network-wide rollout.

Brand, customer, organisation Brand and retail Verified: 2026-11-14

Open interactively →

Why this document

The technology and operations directors read this when a vendor proposal is on the table and the question is whether to pay. It matters because technology gives nothing by itself: RFID pays back where stock accuracy is low and costs sales, AR try-on where size-related returns are high. So the effect is first measured in money on a pilot and only then scaled. The digital passport should be planned separately, as a regulatory and market requirement, not as an image project.

At a glance

What is this document and why is it needed?
The document helps decide which technologies to adopt and in what order: digital product passport, RFID, AR try-on, 3D design. For each it counts what it delivers (stock accuracy, fewer returns, fewer samples, compliance), what it costs and when it pays back, and how a pilot on a few sites differs from a network-wide rollout.
Who owns the document and how often is it rebuilt?
The decision is prepared by the digital or operations director with the finance director; projects are framed as investments with a pilot, success criteria and a decision date. The owner sees payback and pilot risks.
What mistakes are the most common?
Adopting technology for its own sake -> costs without effect -> start from a problem in money. Assuming sales uplift without a pilot -> overstated payback -> a pilot with a control group. Dirty master data -> tags and passport do not match the product -> clean data first.

For whom

Brand
A brand benefits more from technology that works for the product: 3D design (fewer physical samples and faster approval), a digital passport and composition and origin data, RFID at production and warehouse for accurate shipping. The effect appears in cost and collection time to market.
Retail
A retailer benefits more from technology on stock and the customer: RFID in stores (accurate stock, quick counts, fewer losses), AR try-on and smart mirrors (fewer returns, more conversion), data for omnichannel. The effect appears in availability and returns cost.

What it consists of

1. Digital product passport (DPP)

  • Contents: product identifier, material composition, origin, suppliers, care and repair rules, recycling, carbon footprint; access by link or code on the item.
  • What it gives: compliance for export markets, customer trust, a basis for resale and repair; what it needs: clean master data and supplier data.

2. RFID

  • A tag on each item, readers at warehouse, entrance and in store, handheld scanners for counts; integration with the accounting system and WMS.
  • What it gives: stock accuracy (up to 95–99% when set up correctly; a notional figure to be validated by a pilot), counts many times faster, item visibility for web orders, fewer losses.

3. AR try-on and smart mirrors

  • Retailer: Virtual try-on on the web and in the app, mirrors with size and complementary item suggestions in store.
  • What it gives: higher conversion and fewer fit returns; the effect is measured with a control group, not by comparing periods.

4. 3D design

  • Brand: Digital samples in 3D garment software (CLO, Browzwear and similar): fit and drape on a virtual avatar, color and material approval without a physical sample.
  • What it gives: fewer physical samples and iterations, faster time to market, sales content before production; condition: a library of materials and avatars based on real measurements.

5. Payback calculation and pilot

  • For each technology: annual effect (profit from sales, savings on returns, samples, labor), one-off cost, annual running cost, payback in months.
  • Pilot: 2–4 stores or part of web traffic with a control group, 8–12 weeks, success criteria set in advance.

6. Brand and retailer: where each technology works

  • Brand: Brand DPP: the owner of the passport data (composition, suppliers, repair, recycling); data are collected along the chain from the material, so the source of truth should be in PLM, not a spreadsheet; incomplete supplier data are closed by contract.
  • Retailer: Retailer DPP: receives data from brands and shows them to the customer via QR; for a private label it collects data like a brand; control: the share of cards where the brand lacks mandatory fields.
  • Brand: Brand RFID: the tag is applied at sewing or packing, the shipment is checked against the ASN without recounting, shipment accuracy rises; the gain is fewer wholesale claims and faster receiving at their end.
  • Retailer: Retailer RFID: a store count in hours (an example assumption of 160 against 64 hours), “find on the floor”, theft protection, one stock view for online; tags are read at receiving by portals.
  • Brand: 3D and digital samples: fewer physical samples (an assumption of 2 samples per style at RUB 9,000), a digital showroom for wholesale clients before manufacturing; the condition is shared material and fit standards in PLM.
  • Retailer: AR try-on and smart mirrors: conversion growth and lower online returns; for a multi-brand retailer a catalog of brand 3D models is needed, so reach is limited to the private label and partners.
  • Brand: Brand pilot: one factory or one DC, 8-12 weeks; criteria: shipment accuracy, receiving time at the client, share of samples saved.
  • Retailer: Retailer pilot: 2-4 stores and the same number of control stores, 8-12 weeks; criteria: stock accuracy, count time, size sales, online returns.

7. Brand and retailer: what to count in payback

  • Brand: Brand effect in money: saved samples, fewer wholesale client claims, a collection launch sped up by weeks; the added tag cost and supplier data work go into costs.
  • Retailer: Retailer effect in money: sales growth from size availability, lower losses, count labor savings, fewer online returns; costs: tags, readers, integration, store training.

How to read the result and which decisions follow

  • The bridge shows a net RFID effect of RUB 13.9 m per year before running cost of RUB 1.2 m on an investment of RUB 24.0 m; payback 22.7 months. The best category by effect to revenue is “Accessories”. Decision: introduce RFID in stages, starting with categories with a high effect per rouble of revenue.
  • Brand: a digital passport and a tag on the item are needed for authenticity, repair and recycling; passport data (composition, suppliers, care) is gathered in PLM in advance. Decision: first put composition and batches in order, then launch the tag; legal dates for textiles are not asserted without checking (unverified).
  • Retailer: RFID pays through the speed of counting and the accuracy of stock in stores; AR try-on and 3D give an effect at the other end of the chain. Decision: compare technologies by payback and by impact on returns and availability, not by novelty.
  • Brand: 3D design cuts the number of physical samples; the example effect is 120 styles x 2 samples x RUB 9,000. Decision: count the effect by dropped samples and cycle speed, not by the number of virtual items.
  • Retailer: the tag as a percentage of price for kids and accessories is higher than for women; for cheap items the tagging decision is taken per batch, not per item.

Control checks

  • Check: the net effect of RUB 13.9 m equals the sum of the bridge columns by category (the code reconciles with the table).
  • Brand: the tag failure rate and read accuracy (95-99% in the example) are conditional; measure them in a pilot and do not carry them from promotional data.
  • Retailer: sales growth from availability (0.8-1.0% in the example) is an assumption; check it with a control group of stores.
  • Brand: product passport data contains commercial information about suppliers; decide what to publish to the client and what to keep inside.
  • Retailer: RFID tagging and movement tracking do not replace mandatory labeling where the law requires it; both systems work in parallel (unverified).

Where the data comes from

Data sourceFields
Stock and count data from accountingCount variances, losses, labor spent on counts
Web shop and returns logisticsOrders, return rate and reasons, return handling cost
Product and samplesNumber of styles, samples per style, sample cost, approval times
Supplier and certificate dataComposition, origin, certificates, data for the product passport

How to build it step by step

  1. Step 1. State the problem in money (stock variance, size returns, sample count), not “adopt technology”.
  2. Step 2. Size the problem from own annual data: lost sales, return costs, sample spend.
  3. Step 3. For each technology define the effect mechanism and the share of the problem it removes; the share is an assumption until the pilot.
  4. Step 4. Compute costs: one-off (equipment, integration) and recurring (tags, licenses, support, staff).
  5. Step 5. Build the payback table and sensitivity to the key assumption (for example sales uplift).
  6. Step 6. Plan a pilot with a control group and metrics; define in advance the values at which rollout expands or stops.
  7. Step 7. Prepare data: clean master data, barcodes and codes, composition, supplier data.
  8. Step 8. Run the pilot, compare with control and recompute payback on actual values.
  9. Step 9. Decide whether to scale; plan rollout in waves, staff training, support.
  10. Step 10. Reconcile actual and plan for effect and cost twice a year.
  11. Brand: Step 11. Brand: start with PLM and data quality (composition, suppliers), then the shipment tag; do not launch a DPP without a data owner for each material.
  12. Retailer: Step 12. Retailer: start with stores that have the largest stock mismatches and online fit returns; compute the effect by category, not on average.

Formulas

MeasureFormulasNote
Payback, monthsPayback = one-off cost / (annual effect - annual running cost) x 12If the difference is not positive, the technology does not pay back.
Retailer: Effect of stock accuracyProfit = revenue x sales uplift from availability x gross marginThe uplift is tested in a pilot; overestimating it is the main calculation error.
Effect of return reductionSaving = orders x (return rate before - after) x cost per returnAdd preserved margin if a return cannot be resold.
Retailer: Tag costTag cost = items per year x tag priceThe tag is part of item cost: for cheap items its share is visible.

Formulas in notation

Payback
Payback = Capex / (Effect − Run) × 12
Effect is the annual effect, Run running cost per year; in months; if Effect ≤ Run it does not pay back.
Profit from sales growth
G = Rev × u × GM
u is the sales uplift from stock availability, GM gross margin.
Shrinkage saving
L = Rev × (s_0 − s_1) × (1 − GM)
s_0 and s_1 are shrinkage shares before and after; losses are valued at cost.
Tags per year
Tags = Rev / P × t
P is the average item price, t the tag price.
Tag as % of price
τ = t / P × 100
Shows for which categories RFID is expensive.

Worked example

Exercise: RFID effect in 40 stores by category, RUB m a year

CategoryRevenueItems, thousandProfit from sales upliftLower lossesCount laborTags per yearNet effect before fixed costsTag, % of price
Women1,2802847.21.70.692.287.30.18%
Men6401282.10.60.351.022.00.16%
Kids4001601.70.60.221.281.20.32%
Footwear560861.40.60.300.691.60.12%
Accessories3201071.61.00.170.851.90.27%
Total3,20076513.94.41.736.1213.9

Notional: tag RUB 8, count labor savings spread by revenue (RUB 1.73m in total). Sales uplift differs: from 0.5% in footwear to 1.0% in women; losses before the rollout range from 1.0% to 2.0% of revenue in accessories. Total net effect is RUB 13.9m a year before fixed running costs of RUB 1.2m; with one-off costs of RUB 24m payback is about 23 months. The best effect per rouble of revenue is in Accessories: the tag is cheap against item price while losses are higher. AR and 3D were not split by category. All inputs are exercise assumptions, not a market benchmark; the sales uplift is tested in a pilot.

Figures

RFID effect bridge per year
Waterfall: Sales growth +13.9, Lower shrinkage +4.4, Counting labor +1.73, Tags per year −6.12, Net effect 13.90510152025Sales growthSales growthSales growth: +13.9+13.9Lower shrinkageLower shrinkageLower shrinkage: +4.4+4.4Counting laborCounting laborCounting labor: +1.73+1.73Tags per yearTags per yearTags per year: −6.12−6.12Net effectNet effectNet effect: 13.913.9RUB m
  • positive
  • negative
  • total
Data as a table
StepChangeLevel
Sales growth+13.913.9
Lower shrinkage+4.418.3
Counting labor+1.7320
Tags per year−6.1213.9
Net effect—13.9

RFID effect bridge per year. Profit from sales growth, lower shrinkage and counting labor minus the cost of tags give the net effect before fixed costs.

Annual effect net of running cost by technology
Bar chart: RFID in 40 stores 12.5, AR try-on in the web shop 1.3, 3D design −0.8−50510152025RFID in 40 storesRFID in 40 storesEffect minus running cost: 12.512.5One-off cost: 2424AR try-on in the web shopAR try-on in the webshopEffect minus running cost: 1.31.3One-off cost: 443D design3D designEffect minus running cost: −0.8−0.8One-off cost: 1.51.5RUB m
  • Effect minus running cost
  • One-off cost
Data as a table
MeasureEffect minus running costOne-off cost
RFID in 40 stores12.524
AR try-on in the web shop1.34
3D design−0.81.5

Annual effect net of running cost by technology. What remains per year after running costs: RFID and 3D give a plus, AR try-on does not at these assumptions.

Tag as a percentage of price by category
Bar chart: Women 0.18, Men 0.16, Kids 0.32, Footwear 0.12, Accessories 0.2700.10.20.30.4WomenWomenTag, % of price: 0.180.18MenMenTag, % of price: 0.160.16KidsKidsTag, % of price: 0.320.32FootwearFootwearTag, % of price: 0.120.12AccessoriesAccessoriesTag, % of price: 0.270.27%
Data as a table
MeasureTag, % of price
Women0.18
Men0.16
Kids0.32
Footwear0.12
Accessories0.27

Tag as a percentage of price by category. A tag at RUB 8 is more expensive for lower-priced categories: kids and accessories carry a larger share of the price.

Digital product passport: where data comes from and where it goes. Data is gathered in PLM and from suppliers, published by a code on the item and used by the client, service and recycling.

  1. Suppliers: material, origin → PLM and ERP: composition, batch
  2. PLM and ERP: composition, batch → Passport via a QR code or tag
  3. Passport via a QR code or tag → Client: care, authenticity; Repair and resale; Recycling: composition and disassembly
  4. Client: care, authenticity
  5. Repair and resale
  6. Recycling: composition and disassembly

Specifics by category

Apparel
RFID: the more SKUs and counts, the bigger the effect; a tag in a label or seam costs RUB 8 against an item price of RUB 4,500, i.e. 0.18% (an assumption). 3D design of fit and drape cuts 1-2 samples per style. AR try-on is more useful for outerwear and dresses where fit is critical. DPP: composition and care are already in the tech pack, so a passport pilot starts with one product group, not the whole range.
Footwear
The tag is usually put on the box or insole: on the box data are stable but the mix-up risk is higher (a pair not in its box); inside the pair metal and moisture interfere. AR sizing from a foot measurement (length in mm, Mondopoint) cuts fit returns, the costliest in footwear; EU/UK/US are derived from length. 3D is limited by the last and materials: a digital last is a separate asset. A tag at RUB 8 against a pair price of RUB 6,500 is cheap (0.12%), so the limit is technology, not price.
Accessories
RFID pays on small expensive items: loss reduction and stock accuracy matter more than sales uplift; the example assumption is losses falling from 2.0% to 1.2% of revenue against 1.2% to 0.9% in apparel. A tag on earrings and thin belts is hard to place and metal shields the signal, so hang-tags are used. AR try-on of glasses, jewelry and hats is strong. Bag authenticity: a serial number and repair history in the passport; precious metals need the GIIS DMDK circuit and RFID does not replace it.
Kids
RFID helps with seasonal peaks and high turnover; a tag in a child’s item must be safe (no skin irritation, no small detachable parts), a decision for the technologist (tag requirements under TR CU 007/2011 were not checked, unverified). AR is limited: size depends on height, a 6 cm step, and the child grows. A child’s data is not collected without guardian consent. In a DPP for infants composition and care matter: for children under 1 year products are made of natural materials, except fillings.
Men
RFID pays through basics stock accuracy and auto-replenishment; sales uplift is more modest than in women (an assumption of 0.6% against 1.0%). AR has less effect, but size matching for shirts and suits from measurements cuts returns on sleeve and girth. 3D is useful for basics: one pattern set runs for years, so sample savings pay back more slowly than with fast-changing fashion. DPP is simpler with repeating SKUs: data are reused across seasons without a new collection effort.
Women
A higher share of fashion, fit returns and online: AR try-on and size matching have a bigger effect; a control group is mandatory, otherwise a conversion rise is easily blamed on the season. 3D cuts samples with frequent collection changes. RFID gives a larger uplift through size availability and “find it on the floor” (an assumption of 1.0%). Vanity sizing makes measurement-based matching stronger than number-based. In a DPP each style has more materials and suppliers, hence more data work.

Common mistakes

  • Adopting technology for its own sake -> costs without effect -> start from a problem in money.
  • Assuming sales uplift without a pilot -> overstated payback -> a pilot with a control group.
  • Dirty master data -> tags and passport do not match the product -> clean data first.
  • Rolling out to the whole network at once -> errors replicate -> waves and stop criteria.
  • Confusing an RFID tag with the marking code -> breach of mandatory marking -> apply the marking code by the rules; RFID complements it.

Russian specifics

  • Light industry goods are subject to mandatory code marking (marking rules, an expanding list of product groups): the marking code is required regardless of an RFID tag and is not replaced by it. Rule: Decree 1956 of 31.12.2019: Government Decree of 31.12.2019 No. 1956 (marking rules for light-industry goods).
  • New marking waves change the list of goods and deadlines; check current deadlines against the norm registry at the decision date. Rule: Decree 2129 of 25.12.2025: Government Decree of 25.12.2025 No. 2129 (amendments to Decree No. 1956; fourth marking wave).
  • Brand: EU digital product passport requirements (the ecodesign regulation) matter for exports to the EU; application dates for textiles and the data format need separate checking. Rule: EU Regulation 2024/1781 of 13.06.2024: Regulation (EU) 2024/1781 (ESPR, ecodesign for sustainable products) (rule check not completed).
  • Brand: the marking code is applied to the item at release or import; an RFID tag does not replace the code, and both must be tied to one SKU in the ledger (format and dates unverified).
  • Retailer: at sale and return the marking code is read at the till while RFID portals serve counting; the withdrawal-from-circulation procedure and stock handling are checked against current rules (unverified).

Open interactively →