Marking and trading leftovers
Waves and deadlines of light-industry marking, the code chain and the choice: mark leftovers or sell them off.
About the topic
Light-industry marking in Russia is a digital code (Data Matrix) on every unit, through which the state sees the path of goods from factory to till. For a brand and a store it is not a formality but a condition of sale: goods without a code cannot be sold. This topic explains how marking works, who is responsible at each step, and what to do with stock that was not marked in time.
Start with the logic. A unit gets a code when its producer or importer puts it into circulation. Then the wholesaler passes codes in electronic documents, the retailer receives goods and checks that codes match the waybill, and at the till at sale the code is retired. If at any step a code is lost or does not match, the chain breaks and the goods cannot be sold. So marking turns into a matter of processes: receipt, scanners, tills, document exchange.
Marking has come in four waves: from 01.01.2021 (Resolution 1956), from 01.04.2024, from 01.03.2025 and from 01.03.2026 (Resolution 2129 of 25.12.2025). Each wave covers new groups of goods by customs code, and for each your item is either in or out. Determine this before the deadline arrives. The date of 30.11.2026 relates to remaining stock of the fourth wave, not the third: the third wave’s remainders are closed. Dates are given as of 14.11.2026, so check on the day of the decision.
Now the remainders. Example: you have 4,000 unmarked units, marking capacity of 150 units a day, and 16 days to the deadline. In 16 days you will mark 2,400 and 1,600 remain without a code. You must decide about them in advance: what can be sold within the law, what to mark as a priority (by margin and sales speed), what to write off or return. When allocating limited capacity, start with goods with higher margin and faster sales. Selling and storing without a code carries administrative liability, including confiscation (Article 15.12 of the Administrative Offenses Code; check the size of the fine in the current wording), so a mistake costs more than marking.
Where to start: find your wave and the list of SKUs by customs code, then count remainders and capacity to the deadline. Traps: confusing waves and deadlines, assuming a small batch goes unnoticed, ignoring time for document exchange and labeling. Check with a lawyer.
Key ideas
The code is the goods' pass
Without a code a unit cannot be sold, so marking becomes a condition of sale, not a report. The whole chain (entry into circulation, document exchange, receipt, retirement at the till) must work without breaks.
Waves are tied to customs codes
Four waves: 01.01.2021, 01.04.2024, 01.03.2025, 01.03.2026. Whether a SKU is in a wave is determined by its customs code. One brand can have SKUs in different waves with different deadlines.
Remainders are solved by capacity and priority
First work out the capacity you need. For 5,000 units in 20 days you need 250 a day but have 200: a shortfall of 1,000 units. If you mark the goods with an RUB 1,800 margin (1,500 units) first, what stays without a code is 1,000 units with a RUB 600 margin, so RUB 600,000 is at risk rather than RUB 1.8 million. A margin priority protects the money.
The fine is costlier than marking
Selling and storing without a code carries administrative liability, including confiscation, plus separate liability for data entered into the system (check the sizes in the current Administrative Offenses Code). With the modest cost of marking per unit the choice is obvious.
Processes matter more than the label
A document exchange error, a code that does not match the waybill, a broken scanner or a till without an update stop sales just like a missing code. Check the whole path, not just application.
A leftover without codes is decided in units per day
For the fourth wave unmarked leftovers from 1 August to 30 November 2026 may only be stored, transported and marked for subsequent sale; leftovers not put into circulation in time lose the codes. An example (illustrative): 1,200 unmarked units and 15 days before the date of loss of codes require marking 80 units a day. If the marking capacity is lower, the leftover is divided into what we manage to mark, sell with codes and take away.
Formula: Required marking pace = unmarked leftover ÷ days to the date
What to do: Set up a calendar of steps 90, 30 and 7 days ahead and check the dates and lists against the valid text of the act.
How to work through it
- Determine by customs code which marking wave each SKU belongs to and its deadlines.
- Connect the system: participant registration, operator, document exchange, scanners, tills.
- Count remainders without codes by SKU and days to the deadline.
- Estimate daily marking capacity and how much you will manage.
- Allocate capacity by margin and sales speed; decide the fate of the rest.
- Set up receipt: code reconciliation with the transfer document, handling discrepancies.
- Train cashiers and check customer returns: how the code is returned.
Where to start
Open “Marking waves” and find your wave. If you have leftovers, work out “Mark or sell off” and compare capacity with the days to the deadline. Calculations of the topic in order: “Light-industry marking waves: dates and leftovers”, “The marking code chain: from factory to till”, “Mark or sell off leftovers without a code”.
Calculations in this topic
Light-industry marking waves: dates and leftovers
A reference for the four waves of marking clothing, footwear and textiles: basis, start, deadlines for selling and marking leftovers, what applies on 13.11.2026 and the fines. The 30.11.2026 deadline belongs to the fourth wave. Pick a wave.
Which wave we are in, the deadlines for leftovers and what is banned now.
The marking code chain: from factory to till
Shows the steps of a marking code for your role: what to do, what most often breaks and where costs build up. The steps follow the general code workflow; details for your group: check the rules of the marking system.
Which steps a code passes and what most often breaks.
Mark or sell off leftovers without a code
Compares three ways for leftovers without a code: mark and sell, sell off at a discount before the deadline and write off the rest, or write everything off. Calculates the marking cost per unit, capacity to the deadline, expected fine, the maximum marking cost and the price below which marking does not pay. You enter the fine and prices yourself.
Mark the leftovers or sell them off, and is capacity enough.
Self-check questions
- Which wave does each of our SKUs fall into by customs code?
- What deadlines apply to the remainders of our wave?
- How many units lack a code and how many will we manage to mark?
- What do we do with the rest: lawful sale, return or write-off?
- Do document exchange, scanners and tills work without faults?
- How do we handle code discrepancies at receipt?
- What happens to the code on a customer return?
- Who on the team owns marking and who checks the deadlines?
Knowledge check
Multiple-choice questions. The correct answer and the explanation follow each question.
Why does the cost of leftovers without a code not change the choice between “mark” and “write off”?
- A. On marking the cost is refunded, on write-off it is not
- B. It is already spent and sits in the result of every path, while the difference is decided by the selling price, marking costs, capacity to the deadline and the fine risk
- C. The choice depends only on the price of a code: the rest does not matter
- D. On write-off the cost is counted twice, so marking is always better
Correct answer: B. It is already spent and sits in the result of every path, while the difference is decided by the selling price, marking costs, capacity to the deadline and the fine risk. The money for the goods has already been paid: the cost of the leftovers is subtracted both in the result of marking and in the result of a write-off, so it cancels out in their difference. The choice is made by the selling price, the share sold at the normal price, marking costs per unit (code, label, labor, one-off costs), capacity to the deadline and the expected fine. There is no refund of cost on marking, the code price is not the only factor, and there is no double counting on write-off either. Check the deadlines and fine sizes for your wave in the current edition.
There are 5,000 units without a code, 10 working days to the deadline, 3 staff on marking for 6 hours a day, and one unit takes 2.5 minutes. How many units will not be marked in time?
- A. 208 units
- B. 4,320 units
- C. 4,928 units
- D. 680 units
Correct answer: D. 680 units. Capacity = 10 × 3 × 6 × 60 / 2.5 = 4,320 units, so 5,000 − 4,320 = 680 units will not make it. It takes 5,000 × 2.5 / 60 = 208.3 hours against the 180 available. These units will have to be written off or sold, if selling without a code is still allowed for your wave (check the current edition): at a cost of RUB 900 and a write-off of RUB 20 per unit the loss is 680 × 920 = RUB 625,600. 4,320 is the capacity, not the leftover; 4,928 comes from not multiplying by 60 minutes (capacity 72); 208 is hours, not units. A way out: a fourth employee gives 5,760 units.
There are 5,000 units in stock and capacity to the deadline allows marking 3,000. A code costs RUB 1, a label RUB 2.50 per unit (illustrative values, take the code price from your contract), labor is 1.2 minutes per unit at RUB 500 an hour, one-off costs for a printer, a scanner and training are RUB 54,000. What is the marking cost per unit including one-off costs?
- A. RUB 31.50
- B. RUB 13.50
- C. RUB 24.30
- D. RUB 18.00
Correct answer: A. RUB 31.50. The variable part is 1 + 2.5 + 1.2 / 60 × 500 = RUB 13.5, the one-off costs are 54,000 / 3,000 = RUB 18 per marked unit, so the total is RUB 31.5. 13.5 leaves out the one-off costs, 18 is only the one-off costs, 24.3 comes from dividing the one-off costs by the whole stock of 5,000 instead of the marked units (13.5 + 10.8). This figure is compared with the selling price and the maximum marking cost.
An unmarked leftover of 1,200 units, 15 days to the date of the loss of codes. How many units a day must be marked?
- A. 15
- B. 80
- C. 40
- D. 120
Correct answer: B. 80. 1,200 ÷ 15 = 80 units a day. 40 results from dividing by 30 days but 15 remain before the loss of codes. Covered in: A leftover without codes is decided in units per day.
What is allowed from 1 August to 30 November 2026 for unmarked leftovers of the fourth wave?
- A. Sale without restrictions
- B. Only storage, transport and marking for subsequent sale
- C. Only destruction
- D. Import without codes from any country
Correct answer: B. Only storage, transport and marking for subsequent sale. The circulation of unmarked leftovers was allowed until 31 July 2026; then only storage, transport and marking. Leftovers not put into circulation lose the codes. Check the current edition of Resolution No. 2129. Covered in: A leftover without codes is decided in units per day.
Common mistakes
- Confusing waves and deadlines. Consequence: a missed deadline and unsellable goods. Avoid: keep a table of SKU, customs code, wave, deadline.
- Counting only application. Consequence: an exchange or till fault stops sales. Avoid: check the whole path to the receipt.
- Not counting capacity to the deadline. Consequence: unmarked stock by the date. Avoid: count units per day and days to the deadline in advance.
- Marking everything indiscriminately. Consequence: slow goods occupy capacity. Avoid: prioritize by margin and sales speed.
- Hoping a small batch goes unnoticed. Consequence: fine and confiscation. Avoid: decide the fate of remainders lawfully in advance.
Mistake: Leftovers are remembered a week before the date
What it costs: Part of the leftover loses codes In 15 days 600 units will be done, the other 600 will lose the codes.
How to avoid: Keep a calendar of steps 90, 30 and 7 days ahead with an owner. Take an inventory of leftovers 90 days ahead, divide them into sold, marked and taken away and assign an owner.
What it looks like (illustrative figures): A leftover of 1,200 units, 15 days remain: 80 units a day are needed while the capacity is 40.
Russia and the EAEU
The basis of light-industry marking in Russia is the Chestny ZNAK system (operator CRPT) and Government Resolution 1956; the fourth wave was introduced by Resolution 2129 of 25.12.2025. The waves are: from 01.01.2021, from 01.04.2024, from 01.03.2025, from 01.03.2026. Third-wave remainders are closed (sale without a code until 31.12.2025, entry into circulation until 01.03.2026 under Resolution 1134). For fourth-wave remainders the deadline of 30.11.2026 applies: storage and marking in the period from 01.08 to 30.11.2026. Dates are given as of 14.11.2026, so check on the day of the decision.
Liability: selling and storing without a code carries administrative liability under Article 15.12 of the Administrative Offenses Code, including confiscation; entry into circulation falls under the same SKU; false data entered into the system under Article 15.12.1. Check the size of fines in the current wording and with a lawyer.
Processes: the producer or importer obtains codes and puts them into circulation; wholesale passes data through electronic exchange (a transfer document with codes); retail receives, reconciles and retires the code at the till under 54-FZ. Codes are tied to the SKU’s GTIN. For import from the Eurasian union, import data and the participation of operators are needed. Details for each goods group and for children’s goods should be clarified with the operator. The code also affects documents: TR CU 007, 017 and 019 apply separately.
Marking in union countries is introduced nationally: each country sets a date and notifies the Eurasian Economic Commission six months ahead. Guide, please verify: in Kazakhstan mandatory marking from 01.12.2026 (leather, fur, part of clothing, underwear), from 01.03.2027 (outerwear and knitwear), from 01.10.2027 (suits, dresses, trousers), remainders until 01.01.2028, a single operator, Data Matrix (medium reliability, check the text of the order). In Belarus deadlines and operator: indicative as of 14.11.2026, check the text of the act; for supplies to Russia Chestny ZNAK codes are needed through an importer in Russia. In Armenia the date: indicative as of 14.11.2026, check the text of the act. In Kyrgyzstan codes for producers and exporters to Russia have been issued since 20.05.2021, with internal deadlines: indicative as of 14.11.2026, check the text of the act.
Categories and audiences
- Apparel
- If it is apparel: most groups have entered the waves, codes are needed per unit of each SKU. Many SKUs and sizes, so the problem lies in records and reconciliation at receipt. Season remainders must be brought in line with the deadline before sales begin.
- Footwear
- Footwear was marked earlier than other groups: the system has run for a long time and processes are established. A code per pair, and the size run gives many units. Size returns need a clear rule for what happens to the code when an item returns to sale.
- Accessories
- On accessories: part of positions fall under marking (leather and fur items), part do not, so check each SKU by customs code, not by category name. Small items in packs require special handling of codes.
- Kids
- In children’s wear: items fall under marking and under technical regulations for children’s clothing, so documents and codes are checked more strictly. Remainders before the school season should be marked in advance. The size and age group in the product card must match the data in the marking system.
- Men
- For the men’s range: basic items stay in assortment for long, so remainders pass between seasons and waves. Make sure warehouse remainders do not reach a deadline without a code. Outerwear and suits fall into different waves, so check by customs code.
- Women
- If it is the women’s range: wide assortment, many SKUs and collection changes, so there are more remainders without codes. Plan marking by priority: new arrivals and fast sellers first. Knitwear, underwear and dresses may fall into different waves, so check deadlines.
Questions this topic answers
- Which wave are we in and what are the deadlines?
- Mark leftovers or sell them off?
- Is capacity enough by the deadline?
- What code chain must an item pass?
Key measures and terms
Study first
What next
Related: “Size runs, stores and range in season”, “Platforms and the platform economy law”, “Master data: SKU, SKU, barcode”.
Documents on this topic
- Certification, declaration and marking: TR CU 007/2011, 017/2011, Chestny Znak, EPR, voluntary standards
- Kids: height sizing, back-to-school, TR CU 007/2011 and 10% VAT
- Fashion tech: digital product passport, RFID, AR try-on, 3D design
- Operating in the EAEU for a brand and a retailer: country, form of presence, tax, payments, marking, first 90 days
- Goods inside the EAEU: free circulation, indirect taxes on import, import statement, documents
- Light-industry marking by EAEU country: Russia, Kazakhstan, Belarus, Armenia, Kyrgyzstan
- Checklist for entering the markets of Kazakhstan, Belarus, Armenia and Kyrgyzstan: registration, contracts, tax, marking, payments, warehouse, support
- Wildberries: work schemes, what the sales report consists of, promotion and the card for fashion
- Lamoda: a specialized fashion platform, try-on and partial buyout, size information and returns
- Kaspi and Uzum: platforms of Kazakhstan and Uzbekistan, instalments, country tax, marking and brand entry
- Starting on a platform: registration, trademark, content, marking, EDI and the first 30 days
- Systems and data: 1C and ERP, PIM and MDM, BI, integrations (e-document exchange, marking, marketplace API), cost of ownership and data quality
- Entering the market of Kazakhstan: form of presence, contract, tax, marking, certification, payments, warehouse, support
- Entering the market of Belarus: form of presence, contract, tax, marking, certification, payments, warehouse, support
- Entering the markets of Armenia and Kyrgyzstan: form of presence, contract, tax, marking, certification, payments, warehouse, support
- Marking across the border: codes in the flow, import, export, stock, re-marking, fines, country checklists
- Calendar of regulatory changes for light industry: marking, VAT, platform and retail rules, the EAEU and the EU