Product life cycle: emissions by five stages and per wear, a comparison of variants and the number of wears for parity
Extends the emissions estimate to the life of the item: material, production and transport are taken per unit (from the calculation “Carbon estimate per item” or from the supplier), while use (washing and drying) and end of life (disposal or recycling) are counted here. For several item variants it shows emissions over the life and per wear and how many wears a more durable variant needs to match the base. Enter your own factors and name the source: the example values are illustrative and not taken from a reference.
At a glance
- What question does it answer?
- What part of emissions falls on material and production, what on use and end of life, how many emissions there are per wear and how many wears a durable variant needs to match the base.
- What data is needed?
- The emissions of material, production and transport to the warehouse per unit from the calculation “Carbon estimate per item” or from the supplier.
- How to read the result?
- Example on the default values (a basic blouse, 30 wears): over the life 13.6 kg CO₂e, per wear 0.45 kg; material and production give 63%, use 21%. The best variant per wear: “A more durable blouse, heavier to produce”, 0.26 kg per wear (−42% against the base). The durable blouse needs 37 wears for parity. Example on the default values: Life emissions of the base item: 13.6 kg CO₂e; Per wear, base: 0.45 kg CO₂e; Material and production in the base life: 63%; Use in the base life: 21%. The figures are illustrative: enter your own to see your result.
Why and how to reason
An item cannot be assessed only up to the warehouse: after the sale it is worn, washed and thrown away or passed on. So the emissions are collected by five stages: material, production, transport, use, end of life. Then they are divided by the number of wears, which gives emissions per wear: by this unit a cheap item for 30 wears and a durable one for 80 can be compared fairly. The fixed part is divided by wears while washing per wear is nearly constant, so durability cuts the figure sharply. Example: the basic blouse gives 13.6 kg CO₂e over the life and 0.45 kg per wear; the durable blouse is heavier to produce but gives 0.26 kg per wear, 42% less.
When to use it
The calculation is needed when choosing between item variants, when discussing material and quality with a factory, when assessing resale and rental (more wears over the life), when preparing data for partners and for environmental claims. It does not replace a life cycle assessment under a standard and does not support public claims: they need the sources of the factors and a method. For footwear count pairs and outsole wear, accessories have no washing, and children’s items have a short life and frequent passing on.
How to read the result
First the shares: material and production give 63% of the base life, use 21%. Then emissions per wear for the variants: the more wears, the lower the figure. The parity number says how many times the durable blouse must be worn to match the base: 37. If you realistically expect fewer, the durability does not pay in emissions. One wash weighs 0.19 kg CO₂e: if use is above 40%, the levers are in care (temperature, drying), not in the material. To compare with other items recount them on the same accounting boundary and the same factors, otherwise the figures are not comparable.
Common mistakes
The first error: comparing life emissions rather than per wear. The second: taking the number of wears “from the head” instead of a range. The third: booking recycling as a big negative number without a crediting method. The fourth: publishing the result as an environmental claim without the sources of the factors and a description of the accounting boundary.
What data is needed?
- The emissions of material, production and transport to the warehouse per unit from the calculation “Carbon estimate per item” or from the supplier.
- The factors of washing, drying, delivery, disposal and recycling with your own source.
- The number of wears over the life and of wears between washes by variant.
Inputs
| Field | Unit | Value in the example | Meaning |
|---|---|---|---|
| Emissions per kWh of electricity | kg CO₂e | 0.55 | The emission factor of your regional grid: take it from the supplier or an open reference and write down the source. The example value is illustrative. |
| Electricity per washing load | kWh | 1 | Consumption per machine load including water heating; from the machine data sheet or a measurement. The example value is illustrative. |
| Items per load | units | 14 | How many such items fit in a load: the washing and drying energy is divided by it. The example value is illustrative. |
| Share of washes with machine drying | % | 30 | What part of washes ends with machine drying; it differs greatly across countries and climates. The example value is illustrative. |
| Electricity per drying cycle | kWh | 2.5 | Consumption per cycle of a drying machine. The example value is illustrative. |
| Other emissions of one wash | kg CO₂e | 0.12 | Water, detergent and wastewater treatment for one wash of the item; if there is no data, leave zero and mark the estimate as understated. The example value is illustrative. |
| Delivery to the customer per unit | kg CO₂e | 0.8 | The emissions of the last mile and a possible return per item; added to the transport to the warehouse from the table. The example value is illustrative. |
| Share of items going to recycling or reuse | % | 15 | What part of items is really recycled or passed to new owners at end of life; the rest is disposed of. The example value is illustrative. |
| Disposal emissions per kg | kg CO₂e/kg | 0.9 | The emissions of landfilling or burning a kilogram of the item; from your reference. The example value is illustrative. |
| Emissions when recycled per kg (negative: a credit) | kg CO₂e/kg | −0.4 | The emissions of recycling net of the credit for displaced raw material; a negative value is allowed but write down the crediting method. The example value is illustrative. |
How it is calculated
| Step | Formula |
|---|---|
| Wash emissions | (wash kWh ÷ items + drying share × drying kWh ÷ items) × grid emissions + other |
| Use | wears ÷ wears between washes × wash emissions |
| End of life | mass × ((1 − recycling share) × disposal + recycling share × recycling) |
| Total and per wear | material + production + transport + use + end of life; ÷ wears |
| Parity | fixed part of the second ÷ (per wear of the base − use per wear of the second) |
Worked numbers
Default values from the app; in the interactive version you enter your own.
- Life emissions of the base item
- 13.6 kg CO₂e
- Per wear, base
- 0.45 kg CO₂e
- Material and production in the base life
- 63 %
- Use in the base life
- 21 %
- Variant with the lowest emissions per wear
- A more durable blouse, heavier to produce
- Lowest emissions per wear
- 0.26 kg CO₂e
- Best variant against the base
- −42 %
- Wears of the second row for parity with the base
- 37
- Emissions of one wash of the item
- 0.189 kg CO₂e
- End-of-life emissions per kg
- 0.71 kg CO₂e
- Material
- Production
- Transport
- Use
- End of life
Data as a table
| Measure | Material | Production | Transport | Use | End of life |
|---|---|---|---|---|---|
| Basic blouse | 6 | 2.5 | 2 | 2.83 | 0.25 |
| A more durable blouse, heavier to produce | 7.8 | 3.2 | 2 | 7.55 | 0.28 |
| Basic blouse, a second owner | 6 | 2.5 | 2.7 | 5.19 | 0.25 |
- Basic blouse
- A more durable blouse, heavier to produce
Data as a table
| Wears in the life | Basic blouse | A more durable blouse, heavier to produce |
|---|---|---|
| 10 | 1.17 | 1.42 |
| 20 | 0.632 | 0.758 |
| 30 | 0.453 | 0.537 |
| 40 | 0.363 | 0.426 |
| 50 | 0.309 | 0.36 |
| 60 | 0.273 | 0.316 |
| 70 | 0.248 | 0.284 |
| 80 | 0.229 | 0.26 |
| 90 | 0.214 | 0.242 |
| 100 | 0.202 | 0.227 |
| 110 | 0.192 | 0.215 |
| 120 | 0.184 | 0.205 |
Life stages by variant, kg CO₂e
| Variant | Material | Production | Transport | Use | End of life | Total | Per wear |
|---|---|---|---|---|---|---|---|
| Basic blouse | 6 | 2.5 | 2 | 2.83 | 0.25 | 13.58 | 0.453 |
| A more durable blouse, heavier to produce | 7.8 | 3.2 | 2 | 7.55 | 0.28 | 20.83 | 0.26 |
| Basic blouse, a second owner | 6 | 2.5 | 2.7 | 5.19 | 0.25 | 16.64 | 0.302 |
Emissions per wear fall fast with the number of wears: the fixed part (material, production, transport, end of life) is divided by them, while use per wear barely changes. So the main lever is durability and reuse, not only composition. The number of wears over the life is estimated by you and is the shakiest figure: give a range. For footwear count pairs and outsole wear, accessories have no washing, and for children’s the life is shorter and items are more often passed on to other children.
Nuances and limits
- Comparing variants by life emissions rather than per wear: a durable item “loses” in production.
- Taking the number of wears from the head: it is the shakiest figure, give a range.
- Booking recycling as a big negative number without a crediting method.