Syntha Lab RU

Warehouse: WMS, handling cost, SLA, returns and cycle counting

The warehouse operating pack: cost of handling an order and a unit, service-level agreements (SLA), cross-dock and storage schemes, returns handling, RFID and cycle counting. It is used to decide whether to run the warehouse in-house or with a logistics operator, and what accuracy and speed to demand.

Production, logistics, channels Brand and retail Verified: 2026-11-14

Open interactively →

Why this document

A warehouse eats money quietly: every extra operation, picking error and return to the shelf adds to the cost of an order. So the operations director, the finance lead and the logistics operator read the pack: the first compares in-house with outsourcing, the second checks that the tariff covers real operations, the third sees their obligations on time and accuracy. If the SLA is not measured, a late-delivery penalty cannot be proved. Before signing, therefore, the cost of handling one order is calculated and the metrics for accepting the work are fixed.

At a glance

What is this document and why is it needed?
The warehouse operating pack: cost of handling an order and a unit, service-level agreements (SLA), cross-dock and storage schemes, returns handling, RFID and cycle counting. It is used to decide whether to run the warehouse in-house or with a logistics operator, and what accuracy and speed to demand.
Who owns the document and how often is it rebuilt?
Run by the logistics director or warehouse manager with finance; monthly report; the result goes to the commercial director and those who plan channels and delivery times.
What mistakes are the most common?
Costing the warehouse without returns → cost per order understated → show returns as a separate line. One “per unit” rate for different flows → wholesale and online subsidize each other → allocate costs by flow and driver. An annual count instead of cycle counting → discrepancies accumulate and hurt sales → daily prioritized counts.

For whom

Brand
A brand with online and wholesale channels runs two flows: pallet wholesale (to retailers’ stores) and piece-picked consumer orders. The consumer flow is costed per order, wholesale per pallet; under commission and consignment custody of others’ goods is added.
Retail
A retailer with a store network: receiving and distribution to stores (cross-dock), reserve storage, replenishment, returns and inter-store transfers; handling cost is measured per unit and per carton; stock accuracy determines availability in store and online.

What it consists of

1. Warehouse processes

  • Receiving (check against ASN and delivery note, marking), put-away, storage, picking, packing, dispatch, returns, counting.

2. WMS and location control

  • The warehouse management system: addressed storage, picking tasks, waves, marking control, exchange with the ERP and OMS; without a WMS stock accuracy falls as the range grows.

3. Handling cost

  • Items: rent, staff, WMS and IT, packaging, equipment, returns; converted per order, per unit, per carton, per pallet position per day.

4. SLA and metrics

  • Share of orders picked and shipped on time; picking accuracy; inventory record accuracy (IRA); receiving time; share of damage and loss; returns processing time; penalties and bonuses.

5. Cross-dock and storage

  • Retailer: Cross-dock: goods received and immediately distributed to shipments without storage; saves space and time but requires an accurate ASN and allocation. Storage is needed for online stock and re-orders.

6. Returns (reverse logistics)

  • Receiving, condition check, decision (restock, clean and repack, outlet, write-off), refund and stock update; time to restock directly affects turnover.

7. RFID and cycle counting

  • RFID tags speed up receiving and counting; cycle counting: daily checks of a share of locations by priority (expensive, fast-moving, with discrepancies) instead of shutting down for an annual count.

Returns: the roles of the sides after ruling 7-P

  • Brand: if the brand sells online itself it must accept distance returns and keeps the piece-return flow separate from pallet wholesale; wholesale returns follow the contract and adjustment documents.
  • Retailer: the warehouse receives returns by post and carrier, makes a condition act on receipt, decides the fate of the goods (back to sale, cleaning, outlet, write-off) and returns the stock to the system within the target time.

Brand and retailer: what differs in practice

  • Brand: receives goods from the factory by documents and marking, separately from customer returns, so that codes and quantities are not lost.
  • Brand: chooses between its own warehouse and a logistics operator by cost per order at its volume and the seasonal peak.
  • Brand: separates stock by channel (wholesale, own site, marketplace) so as not to sell one item twice.
  • Brand: builds the operator contract on a per-operation tariff and handling times, not only on the storage price.
  • Brand: prepares labels and packaging for wholesale and for marketplaces separately: platform requirements differ from wholesale ones.
  • Brand: keeps an SLA with the operator: shipment times, inventory accuracy, fines for errors and reconciliation procedure.
  • Retailer: manages transfers between stores and the warehouse: goods in transit enter stock and the turnover calculation.
  • Retailer: plans cross-docking for fast items so that part of the goods does not reach the racks and accumulate storage costs.
  • Retailer: covers the seasonal peak with temporary staff and reserves space in advance rather than expanding the warehouse for the whole year.

How to read the result and what decisions follow

  • If the cost per order falls faster than volume rises, the fixed part is large: check rent and staff, not the packaging tariff.
  • The return rate multiplies warehouse costs: an online channel with a high return rate can make the warehouse unprofitable even at low rent.
  • Decision: own warehouse or operator, the return route, a seasonal space reserve and target SLAs on timing and accuracy.

Control checks

  • The sum of cost items equals the total warehouse account for the month and the cost per order times the number of orders equals total costs.
  • Closing stock equals opening stock plus receipts minus shipments plus returns to stock minus write-offs.

Where the data comes from

Data sourceFields
Financerent, payroll, IT, supplies, depreciation, operator charges
WMS and OMSorders, units, lines, pick time, dispatch, returns, stock
Carriershandover times, damage, loss
Countinglocation count results, discrepancies, causes

How to build it step by step

  1. Brand: Step 1: Describe the flows: pallet wholesale, piece-picked orders, returns, inter-store transfers; each with its own metrics.
  2. Step 2: Collect warehouse costs by item for the month and allocate them to the flows by driver (orders, units, space).
  3. Step 3: Compute the cost per order, unit and carton; compare with operator tariffs on a common basis.
  4. Step 4: Set the SLA: pick time, accuracy, receiving and returns time, penalties and bonuses; fix it in the operator contract or in the procedure.
  5. Retailer: Step 5: Set up cycle counting: priorities, locations per day, rules for investigating discrepancies.
  6. Retailer: Step 6: For returns set the decision rules and restock times; compute returns handling cost and write-off losses.
  7. Retailer: Step 7: Consider RFID for expensive categories: compare tag and equipment costs with time savings and losses.
  8. Step 8: Keep a monthly report: cost, SLA, accuracy, returns; revisit tariffs and operating mode.

Formulas

MeasureFormulasNote
Cost per orderCost per order = (warehouse costs + returns processing) ÷ number of ordersCompute per unit too: an order of two units and one of ten cost differently.
Storage costStorage per unit per day = rent ÷ average stock ÷ number of days; × storage daysFor comparison with cross-dock add the cost of money tied in stock.
Inventory record accuracy (IRA)IRA, % = locations where the records matched actual ÷ all locations checked × 100Define the match tolerance in advance (exact or ±1).
SLA on timeShare, % = orders dispatched on time ÷ all orders × 100Time runs from order receipt to handover to the carrier.
Return costReturn cost = units returned × handling cost per unit + written offShow returns as a separate line, otherwise the cost per order is understated.

Formulas in notation

Cost of processing returns
R = q × U × c_r
q return rate, c_r processing cost of one returned unit. Example: 13,420 units × 38 = RUB 509,960.
Storage cost per unit
s = A / (S_avg × 30) × t
A rent per month, S_avg average stock, t storage days. Example: RUB 36.9 for 90 days.
Inventory accuracy and SLA attainment
IRA = N_correct / N_checked; SLA = N_on_time / N
Example: IRA 93.6%, SLA attainment 97.9%.

Worked example

Online-sales warehouse for a month: cost per order and per unit

ItemMonth, RUBPer order, RUBPer unit, RUB
Rent and utilities640,00016.810.5
Warehouse staff (14 people incl. taxes)1,190,00031.319.5
WMS and IT180,0004.73.0
Packaging and supplies (RUB 7 per unit)427,00011.27.0
Equipment (depreciation)90,0002.41.5
Other70,0001.81.1
Returns processing (22% of units)509,96013.48.4
Total3,106,96081.850.9

38,000 orders and 61,000 units were processed in the month. The warehouse costs RUB 3,106,960: RUB 81.8 per order and RUB 50.9 per unit, of which returns of 13,420 units cost RUB 509,960. Storing a unit costs RUB 0.41 per day; over 90 days that is RUB 36.9 against RUB 9 with cross-dock. 97.9% of orders were dispatched on time; stock accuracy on a count of 500 locations is 93.6%.

Figures

Warehouse cost structure per month
Bar chart: Rent and utilities 640k, Warehouse staff (14 people incl. taxes) 1.19m, WMS and IT 180k, Packaging and supplies (RUB 7 per unit) 427k, Equipment (depreciation) 90k, Other 70k0200k400k600k800k1m1mRent and utilitiesRent and utilitiesCost, RUB: 640k640kWarehouse staff (14 people incl. taxes)Warehouse staff (14people incl. taxes)Cost, RUB: 1.19m1.19mWMS and ITWMS and ITCost, RUB: 180k180kPackaging and supplies (RUB 7 per unit)Packaging andsupplies (RUB 7 per…Cost, RUB: 427k427kEquipment (depreciation)Equipment(depreciation)Cost, RUB: 90k90kOtherOtherCost, RUB: 70k70kReturns processingReturns processingCost, RUB: 510k510kRUB
Data as a table
MeasureCost, RUB
Rent and utilities640k
Warehouse staff (14 people incl. taxes)1.19m
WMS and IT180k
Packaging and supplies (RUB 7 per unit)427k
Equipment (depreciation)90k
Other70k
Returns processing510k

Warehouse cost structure per month. Fixed items (rent, staff, IT) are divided by the number of orders; packaging and returns grow with volume. Total RUB 3,106,960 per month: RUB 81.8 per order and RUB 50.9 per unit. Illustrative figures.

Cost of handling an order and order volume
Line chart: Cost per order, RUB: 133 → 60.860801001201402030405060example volume, thousand ordersCost per order, RUB, 20: 133Cost per order, RUB, 30: 97Cost per order, RUB, 38: 81.8Cost per order, RUB, 50: 68.1Cost per order, RUB, 60: 60.8RUB
Data as a table
MeasureCost per order, RUB
20133
3097
3881.8
5068.1
6060.8

Cost of handling an order and order volume. Fixed costs are spread over more orders so the cost per order falls as volume grows.

Goods flow in the warehouse: receipt, storage, shipment, return. The forward flow runs left to right, the reverse flow of returns is below: on returns the warehouse loses time and margin.

  1. Receipt and check → Putaway and storage
  2. Putaway and storage → Picking and packing
  3. Picking and packing → Shipment to the customer
  4. Shipment to the customer → Return receipt
  5. Return receipt → Inspection and decision
  6. Inspection and decision → Back to stock; Defect or repair
  7. Back to stock → Putaway and storage
  8. Defect or repair

Specifics by category

Apparel
Apparel: storage on hangers and in cartons, a high share of online returns, time for steaming and repacking; sizes and colors create many storage locations.
Footwear
Footwear: one box per pair, heavy and bulky units, high returns from fitting by size; pair checks at returns receiving are mandatory.
Accessories
Accessories: small units, high value and risk of loss, protection and frequent counting are needed; RFID and access-controlled bins pay back fastest.
Kids
Kids: certificates and marking are mandatory at receiving; seasonal peaks and a wide size run; cleaning and repacking of returns with higher hygiene requirements.
Men
Menswear: stable sizes and fewer returns; a larger share of core items in storage, steadier turnover.
Women
Womenswear: more styles and sizes, a higher return share by size; a significant share of non-standard packaging and delicate materials.

Common mistakes

  • Costing the warehouse without returns → cost per order understated → show returns as a separate line.
  • One “per unit” rate for different flows → wholesale and online subsidize each other → allocate costs by flow and driver.
  • An annual count instead of cycle counting → discrepancies accumulate and hurt sales → daily prioritized counts.
  • No SLA for returns → goods stay out of sale for weeks → set the restock time in the contract or procedure.
  • Cross-dock without an accurate ASN → discrepancies at allocation → require an ASN and reconcile at receiving.

Russian specifics

  • Consumer rights to return and exchange, including distance sales (Arts. 25 and 26.1 of the Consumer Protection Law), determine the share of returns and their processing time (the article terms are not checked against the text). Rule: Law 2300-1 of 07.02.1992: Law of 07.02.1992 No. 2300-1 on consumer rights protection (rule check not completed).
  • Constitutional Court ruling of 17.02.2026 No. 7-P (operative part read): paras 3 and 4 of Art. 26.1 are unconstitutional because they do not let a buyer return good-quality goods bought at a distance by a distance method; until the law changes the return goes by any method that lets the seller check the condition (post, carrier), the risk of damage in transit and delivery costs are borne by the buyer. The returns warehouse receives such parcels and checks the condition on receipt. Rule: Decree 7-P of 17.02.2026: Constitutional Court Ruling of 17.02.2026 No. 7-P (paras 3 and 4 of Art. 26.1 of the Consumer Rights Law).
  • Light-industry goods under marking: receiving, movement, withdrawal and return are accompanied by data transfer to the marking system; the warehouse must scan the codes. Rule: Decree 1956 of 31.12.2019: Government Decree of 31.12.2019 No. 1956 (marking rules for light-industry goods).
  • Labor rules (working time and overtime) affect warehouse scheduling in peak periods. Rule: Labor Code Art. 152: Labor Code, Art. 152 (overtime pay).

Open interactively →