Syntha Lab RU

Display: productivity of a linear meter and of facings by zone

Compares store zones by revenue and margin per linear meter and per facing, shows the index (share of sales ÷ share of space), the best and worst zones and estimates whether moving meters from a weak zone to a strong one pays when returns diminish.

Full cost of the premises and display For whom: Visual merchandisers and category managers.

Calculate on your data →

At a glance

What question does it answer?
Which display zones return more or less than their share of space.
What data is needed?
By zone: meters, revenue and margin for one month; facings optionally.
How to read the result?
Average revenue is 40,000 per meter. The best zone “Dresses” gives 22,000 of margin per meter, the worst “Trousers and jeans” 17,600 (a 25% gap). Moving 5 meters at a 90% return brings 11,000 a month; it pays while the return is not below 80%. Example on the default values: Revenue per linear meter, average: RUB 40,000; Best zone by margin per meter: RUB 22,000 · Dresses; Worst zone by margin per meter: RUB 17,600 · Trousers and jeans; Gap between best and worst: 25%. The figures are illustrative: enter your own to see your result.

Why and how to reason

Space in a store is a resource and must be divided not equally but by return. The linear meter of display is the main unit of space. The calculation compares zones: margin per meter = revenue × margin ÷ meters. “Outerwear”: 1.3 million × 42% ÷ 30 = 18,200 per meter; “Dresses”: 1.1 million × 50% ÷ 25 = 22,000 (best); “Trousers and jeans”: 1.4 million × 44% ÷ 35 = 17,600 (worst): a gap of 25%. Zone index = (share of sales) ÷ (share of space): above 1 the zone sells more than its space. But the return from a new meter diminishes: add a meter to dresses and it will not sell as well as the previous ones. So the calculation includes the return of a new meter relative to the zone average (90%). Moving 5 meters from worst to best: 5 × (22,000 × 0.9 − 17,600) = 11,000 a month. The move pays as long as the return of a new meter is not below 80%.

When to use it

It fits when planning layout, before a season and at renovation. It suits a store with zones and reporting by meters. It does not suit cases where zones have different roles: accessories at the till give cross-sales rather than direct revenue. Assumptions: the return of a new meter is your estimate; premises per meter come from the “Full cost of premises” calculation; facings are counted to compare display density.

How to read the result

First “gap between the best and worst zone”: if above 20% redistributing meters makes sense. Then “benefit of the move” and the threshold of the new meter’s return: if you believe a new meter sells not below 80% of average, the move pays. Zones with margin per meter below premises cost per meter lose money on space: either reduce or raise revenue. But a zone’s low return is not a reason to remove it: it may have a role in traffic or average order. It is worth checking the decision with a test in some stores and look at total revenue, not only the zone.

Common mistakes

Assuming a new meter’s return equals the average: it is lower. Comparing zones of different categories without regard to role. Redistributing meters without changing stock: the display is empty and sales do not grow. Not accounting for customers walking a route in the store: moving a zone changes traffic for its neighbors. Always check a move of meters against stock: if the strong zone cannot be given enough goods, the added meter will stay empty.

What data is needed?

  • By zone: meters, revenue and margin for one month; facings optionally.
  • Return of a new meter and the premises cost per meter.

Inputs

FieldUnitValue in the exampleMeaning
Linear meters to movelin. m5How many meters to take from the worst zone and give to the best.
Return of a new meter vs the zone average%90Meters added beyond the norm work below the average: an estimate from a display test; there is no single standard in Russia, enter your own.
Premises per linear meter a month₽5,300From “Full cost of the premises”; 0: leave out when comparing zones.

How it is calculated

StepFormula
Zone index(zone revenue ÷ total revenue) ÷ (zone metres ÷ total metres)
Margin per metrerevenue × margin ÷ metres
Gain from the movemetres × (best zone margin per metre × return − worst zone margin per metre)

Worked numbers

Default values from the app; in the interactive version you enter your own.

Revenue per linear metre, average
40,000 ₽
Best zone by margin per metre
22,000 ₽ · Dresses
Worst zone by margin per metre
17,600 ₽ · Trousers and jeans
Gap between best and worst
25 %
Gain from moving metres a month
11,000 ₽
The move pays if the new metre’s return is not below
80 %The worst zone’s margin per metre ÷ the best zone’s. Below this share the move loses.
Zones with margin per metre below the premises cost
0

Display zones

ZoneMetresSpace shareSales shareIndexRevenue per metreMargin per metrePer facing
Outerwear3020 %21.7 %1.0843,333 ₽18,200 ₽14,444 ₽
Knitwear4026.7 %25 %0.9437,500 ₽17,625 ₽9,375 ₽
Trousers and jeans3523.3 %23.3 %140,000 ₽17,600 ₽13,333 ₽
Dresses2516.7 %18.3 %1.144,000 ₽22,000 ₽11,000 ₽
Accessories2013.3 %11.7 %0.8835,000 ₽19,250 ₽8,750 ₽

An index above 1 means the zone sells more than its share of space, below 1 less. But a low return does not always mean cutting a zone: it may have a role in traffic or in the average basket (add-on sales). Test decisions on metres in some stores.

Nuances and limits

  • Test the return of a new meter: it is below the average.
  • A zone may work for traffic or add-on sales.

Terms used

Calculate on your data →