The display in numbers: usable hall area, running meters, capacity and density, zoning by productivity and the rotation of the display
How to turn the display from a feeling into a calculation: how much usable selling area and how many running meters the hall has, how many units the fixtures hold and whether they are enough for the need. Also: which display density does not hide the goods, how to divide the hall into zones by role and productivity and how often to change the display. The document decides what fixtures and what share of the area to give to a category, where to raise or lower the density and how many hours a month the rotation will take.
Why this document
The display competes for one scarce resource, area. An error in the area calculation is seen late: there is not enough goods on the floor, fixtures stand empty and the best meters are taken by a weak category. The retail head, the visual merchandiser, the category manager and the corner brand manager read the document when planning the hall, opening a store and changing the season. It supplements the documents on zoning and the planogram with numbers: usable area, capacity, coverage of the need, sales per meter and the cost of rotation.
At a glance
- What is this document and why is it needed?
- How to turn the display from a feeling into a calculation: how much usable selling area and how many running meters the hall has, how many units the fixtures hold and whether they are enough for the need. Also: which display density does not hide the goods, how to divide the hall into zones by role and productivity and how often to change the display. The document decides what fixtures and what share of the area to give to a category, where to raise or lower the density and how many hours a month the rotation will take.
- Who owns the document and how often is it rebuilt?
- The retail head and the visual merchandiser keep the area and fixture calculation, the category manager sets the need for display, the CFO reconciles the sales per meter; reviewed when the season, the format and the fixtures change.
- What mistakes are the most common?
- Brand: the density is set “as high as possible” to show the whole range → goods get lost on the rail and sales per meter fall → set a density standard per category and check it with a photo report. Brand: the aisles and fixtures in a corner at a retailer were not agreed → the display does not fit or blocks the path → count the usable area of the corner by the plan and the contract before ordering fixtures. Retailer: the meters are divided between brands equally or by agreement → weak zones occupy the best places → count the productivity index and redistribute once a season.
For whom
- Brand
- A brand plans its own store, showroom or a corner at a retailer: it needs a layout of fixtures, a density standard by category and a capacity calculation for the collection, and in a corner the area and the aisles are set by the contract with the retailer.
- Retail
- A retailer divides the hall between categories and brands: it needs the usable area, the meters and the sales per meter by zones, the redistribution of meters by productivity and control of planogram execution across stores.
What it consists of
What the hall area consists of
- The area of the selling hall is divided into service zones (fitting rooms with the passage, the till and packing, stock on the floor), aisles and stopping zones and the usable selling area on which the display stands and the customers stand. The usable area equals the remainder after the service zones multiplied by one minus the share of aisles.
- The share of aisles is set by the layout: it depends on the width of the flow, the fixtures and the format, and in part of the hall is subject to safety and accessibility requirements. Cutting aisles for the sake of the display is dangerous: the customer does not enter cramped zones and the meters stop selling.
- Brand: in a corner at a retailer the area and the aisles are set by the contract; count the usable area of the corner by the same rules and agree the fixtures and the density with the retailer in advance.
- Retailer: count the usable area by stores in one way in order to compare the sales per usable square meter between formats and not to get differences from different accounting of fitting rooms and stock on the floor.
Running meters, capacity and density
- A running meter of display is a meter of a rail, a wall, a shelf or a table on which goods can be hung or laid; for a two-sided rack the meters are counted on both sides. The meters are summed by type of fixture: wall rails, island racks, tables, shelves.
- The display density is the number of units on a running meter: on a rail hangers with garments, on a table stacks of folded goods, on a shelf pairs of footwear or bags. The capacity equals the sum over the fixtures of the number of pieces multiplied by the meters and the density. It is an upper bound: the higher the density, the worse the visibility of each unit.
- Compare the capacity with how much is to be shown: the coverage of the need and the display stock are counted in the “Planogram” calculation and described in the term “Display cover”. Less than the full need means cutting the depth of display or the number of SKUs or adding fixtures; much more means the fixtures stand empty.
- Brand: fix in the planogram a density standard by category (how many garments on a meter of rail, how many stacks on a table) and control it with a photo report: without a standard the stores stuff the display in different ways.
- Retailer: compare the sales per running meter between zones and categories; give the meters with below-average sales to the categories with higher productivity if this does not break the role of the category (a traffic builder, a profit core, an image).
Hall zoning
- The hall is divided into zones by the customer’s path and role: the entrance and the first meters (the customer often slows down and does not notice goods well), the window and the large images, the main display by category, promotions and add-ons, fitting rooms, the till. Every zone is given a role and an indicator: visibility, sales per meter, conversion.
- The placement goes by role and productivity: new items and key images to the zones of high visibility, basic items deeper, promotions on the way to the till. The productivity of a zone is shown by an index: the share of the zone’s sales divided by the share of its meters; zones with an index below one give meters to the zones with an index above.
- Brand: put the images of the collection into the most visible zones and not the breadth of the range; from the window the customer must understand the idea and from the hall find sizes and the basics.
- Retailer: distribute the meters between brands and categories by productivity and role, revise once a season and by the sales results; do not give the best meters to brands by agreement without checking the index.
The rotation of the display and control
- Rotation is the planned change of the display of zones: rearranging goods, refreshing images, moving promotions. It is set by a cycle: in how many weeks all zones are refreshed in a circle. The zones per week equal the number of zones divided by the cycle; the hours per month equal the zones per week multiplied by the hours per zone and by 52 ÷ 12.
- The window and the zones at the entrance are refreshed more often than the rest, the other zones by the cycle and by sales: a stale zone does not sell. But every rotation costs staff hours, so the cycle is counted together with the cost and the display is not broken without a reason.
- Brand: send the stores and the retailer the display scheme of the season and the rotation schedule with photographs of the reference; check execution by photo reports and by sales per meter.
- Retailer: count the rotation hours in the staff schedule and control the execution of the planogram (the share of stores where the display matches the reference); do not remove the rotation hours to save payroll without checking sales.
Where the data comes from
| Data source | Fields |
|---|---|
| The store plan | the hall area, fitting rooms, the till, stock on the floor, aisles, the fixtures and their meters |
| The planogram and the need | the density by type of fixture, units on display by category, the depth of display |
| Sales by zone | revenue by zones and categories, the zone’s share of meters, conversion, traffic by zones |
| The schedule and photo reports | the rotation cycle, hours per zone, the cost of an hour, planogram execution by stores |
How to build it step by step
- Step 1: Collect the hall plan: the area, service zones, aisles, fixtures; Brand: for a corner take the plan and the contract with the retailer.
- Step 2: Count the usable area and the running meters of display by type of fixture.
- Step 3: Set the density per meter by the planogram and count the capacity; compare with the need and find a surplus or a shortage.
- Step 4: Retailer: count the sales per usable meter and per running meter by zones and categories, find the productivity index.
- Step 5: Assign the roles to the zones and place the categories: the visible zones for new items and images, the depth for the basics, promotions at the till.
- Step 6: Brand: fix the density standard and the display scheme of the season in the planogram and send them to the stores and the retailer.
- Step 7: Set the rotation cycle, count the hours and the cost and include them in the staff schedule.
- Step 8: Retailer: control execution by photo reports and sales per meter, redistribute the meters once a season.
Formulas
| Measure | Formulas | Note |
|---|---|---|
| Usable area | (hall − fitting rooms − till − stock on the floor) × (1 − the share of aisles) | The share of aisles is set by the layout and the safety requirements. |
| Capacity | Capacity = Σ number × meters × density; the coverage of the need is counted in the “Planogram” calculation (planogram) | The capacity is an upper bound and not a goal. |
| Zone productivity index | Index = the share of the zone’s sales ÷ the share of the zone’s meters | Below one the zone takes more space than it sells. |
| Rotation hours | Hours per month = zones ÷ cycle (weeks) × hours per zone × 52 ÷ 12 | The cost equals the hours multiplied by the cost of an hour. |
Formulas in notation
- Rotation hours per month
H = (Z / T) · h · 52 / 12
Z: the number of zones; T: the rotation cycle in weeks; h: the hours to change one zone; 52 ÷ 12: weeks in an average month.
Worked example
An illustrative 120 m² store (the shirt-jacket and the brand’s range): area, display and rotation
| Indicator | Value | How obtained |
|---|---|---|
| Service zones, m² | 30.0 | fitting rooms 12 + till 8 + stock on the floor 10 |
| Aisles, m² | 31.5 | 35% of (120 − 30) |
| Usable area, m² | 58.5 | 90 − 31.5 = 58.5 (48.8% of the hall) |
| Running meters of display | 47.2 | rails 19.2 + racks 18 + tables 6 + shelves 4 |
| Capacity, units, and the coverage of the need of 400 units, % | 461 / 115.2 | Σ meters × density; capacity ÷ 400 |
| Sales per m² of usable area per month, RUB | 82,051 | RUB 4.8m ÷ 58.5 |
| Sales per running meter per month, RUB | 101,695 | RUB 4.8m ÷ 47.2 |
| Rotation: zones per week / hours per month / cost, RUB | 2.0 / 26.0 / 11,700 | 8 zones ÷ 4 weeks; × 3 h × 52 ÷ 12; × RUB 450 |
Illustrative data. The display holds 461 units against a need of 400: coverage 115%, a reserve of 61 units; rotating 8 zones in 4 weeks costs about RUB 11,700 a month. The density of 6–14 units per meter is illustrative: take your own from the planogram.
Figures
Data as a table
| Measure | Area, m² |
|---|---|
| Fitting rooms | 12 |
| Till | 8 |
| Stock on the floor | 10 |
| Aisles | 31.5 |
| Usable area | 58.5 |
What the 120 m² hall area consists of. Less than half of the hall gives the usable selling area: the rest is fitting rooms, the till, stock on the floor and aisles.
Data as a table
| Measure | Units |
|---|---|
| Wall rail | 173 |
| Island rack (both sides) | 180 |
| Table or unit with folded goods | 84 |
| Shelf (footwear, bags, accessories) | 24 |
| Total capacity | 461 |
| To be shown | 400 |
The display capacity by fixture and the need. Rails and racks give three quarters of the capacity; the total capacity is above the need by 61 units.
Hall zones along the customer’s path. Every zone is given a role: the entrance and the window attract, the main display sells, promotions at the till add to the basket.
- Window and entrance → New items and images
- New items and images → Main display
- Main display → Fitting rooms
- Fitting rooms → Till and add-ons
- Till and add-ons
Specifics by category
- Apparel
- Apparel: rails and racks are the main fixtures, the density depends on the type of garment (outerwear takes more space than T-shirts); tables with folded goods give a higher density but reduce the visibility of the size run.
- Footwear
- Footwear: display on shelves and walls, the density is counted in pairs per meter, one sample per model and the rest of the size run in stock; the usable area includes fitting spots and poufs, so the share of aisles is higher.
- Accessories
- Accessories: showcases, hooks, small display at the till; the meters are counted by showcases and hooks, the density is high but the visibility of each item is low; the till zone gives impulse purchases in a small area.
- Kids
- Children’s: low display, wide aisles for prams, fitting zones with a parent and a play zone; the share of aisles is higher, the density by height is lower and the size run needs a separate display by age.
- Men
- Men’s: the customer more often goes purposefully and quickly, needs clear navigation by categories and sizes; the display is deeper in the basics, the images in visible zones are fewer and the density on rails is higher.
- Women
- Women’s: more images, outfits and seasonal display changes, so rotation is more frequent and the cost in hours is higher; more fitting rooms and waiting zones are needed, which reduces the usable area. For women’s brands with a wide size range wider aisles to the fitting rooms are also needed.
Common mistakes
- Brand: the density is set “as high as possible” to show the whole range → goods get lost on the rail and sales per meter fall → set a density standard per category and check it with a photo report.
- Brand: the aisles and fixtures in a corner at a retailer were not agreed → the display does not fit or blocks the path → count the usable area of the corner by the plan and the contract before ordering fixtures.
- Retailer: the meters are divided between brands equally or by agreement → weak zones occupy the best places → count the productivity index and redistribute once a season.
- Retailer: the rotation hours are not included in the schedule → the display change is postponed and the zones go stale → count the hours and the cost of rotation and include them in the staff schedule.
- The whole hall area is counted as usable → the sales per meter are understated and the need for fixtures overstated → subtract the service zones and the aisles and count per usable meter.
Russian specifics
- Retailer: aisles and escape routes are determined by the safety and accessibility requirements: do not occupy them with display and temporary fixtures; check the norms against the current requirements for your premises, unverified.
- Retailer: price tags and the information about goods in the hall must match the price at the till and the description of the goods; check the requirements for price tags against the rules of selling goods, unverified.
- Brand: the terms of placing a corner, fixtures, staff and display updates are fixed in the contract with the retailer; check the wording and the liability with a lawyer, unverified.