Syntha Lab RU

Planogram and display in apparel: rails, walls, tables, selling slots, display stock and execution control

A planogram in apparel is a plan of where and in what quantity goods hang and lie: which category is on which rail, wall or table, how many meters it gets, how many items fit and in what order they go by color and size. It decides how many meters each category gets, what stock to hold on display and when to replenish, and then checks that the store did what was drawn.

Production, logistics, channels Brand and retail Verified: 2026-11-14

Open interactively →

Why this document

Hall meters are the most expensive resource of a store: you pay rent for them every month. If meters are shared out “as it happened historically”, a fast category stands with empty hangers while a slow one holds frozen stock in the best place. A planogram turns the argument “it seems to me there is too little here” into numbers: how many slots a category takes, how many weeks of sales the display covers and how much revenue and margin a meter brings. The document is read by the retail director, the category manager and the visual merchandiser; it supports decisions on moving meters and on replenishment frequency.

At a glance

What is this document and why is it needed?
A planogram in apparel is a plan of where and in what quantity goods hang and lie: which category is on which rail, wall or table, how many meters it gets, how many items fit and in what order they go by color and size. It decides how many meters each category gets, what stock to hold on display and when to replenish, and then checks that the store did what was drawn.
Who owns the document and how often is it rebuilt?
The visual merchandiser and the category manager; the base plan once a season, adjusted every 2-4 weeks from sales; approved by the retail director, execution checked by the regional manager from a photo report.
What mistakes are the most common?
Meters are shared by historical shares → fast categories empty out, slow ones are frozen → recalculate needed meters from sales and the target cover. Brand: sends a planogram without columns, windows and fixtures → stores cannot execute it → tie the plan to the floor plan of each store type. Retail: counts cover in units without a size breakdown → fast sizes are sold out, the rest hang → watch cover in fast sizes.

For whom

Brand
A brand with its own retail draws reference planograms by store format and sends them with a merchandising guide; for wholesale clients and showrooms it gives display recommendations, because another store is not obliged to follow them. The brand compares sales with execution and shows a partner that display by the plan sells more.
Retail
A multi-brand retailer itself decides how many meters each brand and category gets; for it a planogram is a way to split space between suppliers and seasonal groups and an argument in negotiating a corner. The ratio of zones and the category role (magnet, profit core, image) matter more to it than the single style of one brand.

What it consists of

What a planogram consists of

  • Fixtures and zones: a rail, a wall system with shelves and rods, a table or a stack for folded items, an island, mannequins and a window; each element has a number, a length in meters and a number of tiers.
  • Front and side: front means the item faces the customer, side means its flank faces the aisle; front sells the look, side saves meters. The plan states how many fronts per meter and how many items hang in side view.
  • Selling slots: how many items fit on an element = meters × density (items per meter) × tiers; density differs: dresses on a rail are denser than coats, a knitwear stack is denser than a rail.
  • Order on a rail: first category and style, then color (by color groups or from light to dark), within a color size from smaller to larger; neighboring rails are built into outfits (top, bottom, layer).
  • The golden zone: eye and hand level goes to new arrivals, hits and high margin; lower and upper tiers go to stock, basics and slow items; set exact heights from your customers’ height and the fixtures.
  • Display stock and back room: how many units must stand on the shelf (presentation stock) and at what level to replenish (a threshold, for example a fall to 40% of the display).

What the brand does

  • Brand: prepares reference planograms by store type (flagship, mid-size mall store, corner, shop-in-shop) and by seasonal wave; the reference states items per meter and the order of outfits.
  • Brand: sends a merchandising guide with a photo of each rail and a hall plan; updates it for every delivery and window change, in the active season at least monthly.
  • Brand: for franchisees and wholesale partners makes a simplified version (minimum meters for the brand, order of outfits, places for new arrivals) and fixes compliance in the contract or a marketing agreement.
  • Brand: compares store sales with planogram execution: if stores with high execution sell more under comparable conditions, that is an argument for partners; if not, change the reference, not the stores.

What the retailer does

  • Retail: divides the hall between categories and brands by the category role and meter productivity (revenue and margin per linear meter), not by historical shares; counts how many meters a category needs for its sales and the target cover.
  • Retail: negotiates a corner with the brand: meters, fixtures, who pays for the photo report and replenishment; with consignment sales checks that the brand’s plan does not deprive the hall of magnet categories.
  • Retail: keeps a planogram as a plan for each hall type and a version per store (re-layout, columns, windows); without a link to the floor plan a planogram cannot be executed.
  • Retail: appoints a person in charge in the store (the shift lead), a deadline for setting up after delivery (for example within a day) and a photo-report check; tests moving meters from a weak zone to a strong one in some stores.

Execution control

  • Photo report: an overview of the hall and each rail before and after, with a date and element number; compared with the planogram by a checklist.
  • Checklist (points): the right category on the element; the required number of fronts; color order; new arrivals in the golden zone; price tags in place and legible; no empty hangers in fast sizes; cleanliness and aisles.
  • Execution rate: points done ÷ total points, by store and by chain; the acceptance threshold is set by the retailer, for example not below 90%.
  • Link to sales: sales per meter before and after a change, compared with stores where the plan was not changed (difference in differences).

Where the data comes from

Data sourceFields
Till sales by SKU and categoryunits, revenue, margin by week, full-price share
Store stockstock on display and in the back room by SKU and size
Hall plan and fixture catalogelement meters, tiers, items per meter, columns and windows
Brand and mall rulesmerchandising guide, requirements for windows and approval times

How to build it step by step

  1. Step 1: Collect sales by category for 8-12 weeks and clean them of periods without stock and of heavy promotion, otherwise demand is understated or overstated.
  2. Step 2: Retail: define category roles (magnet, profit core, image) and the target display cover in weeks of sales for each role.
  3. Step 3: Measure the hall: element meters, tiers, items per meter by clothing type; build a table “element, meters, slots”.
  4. Step 4: Calculate slots, display stock, cover in weeks, turnover and meter productivity for each category (see the example).
  5. Step 5: Retail: compare the meters needed with the current ones and move the surplus from categories with cover above the target to categories with cover below it.
  6. Step 6: Draw the hall plan with the entrance zone, the customer path, golden zones and outfits; place categories on elements and check that the sum of meters matches the hall.
  7. Step 7: Brand: set the order on a rail (category, color, size), fronts and sides, replenishment thresholds and the person responsible for execution.
  8. Step 8: Brand: set the plan up in pilot stores, leaving control stores unchanged, and after 4-6 weeks compare sales per meter and the full-price share.
  9. Step 9: Roll out to the chain, switch on the photo-report check and revise the plan every 2-4 weeks in season and after each large delivery.

Formulas

MeasureFormulasNote
Selling slotsSlots = meters × items per meterTake density by item type and display method; for several tiers count meters as the sum of tiers.
Display cover, weeksCover = Slots × fill ÷ weekly salesFill shows what share of slots is really occupied (for example 90%); cover is counted on display units, count the back room separately.
Display turnover per yearTurnover = 52 × weekly sales ÷ (Slots × fill)This is the display turnover, not of all stock: a category with good turnover on the shelf may have too few items.
Meters needed at the target coverNeeded = weekly sales × target cover ÷ (items per meter × fill)The difference between needed and current meters shows where to take from and where to give; test a move.

Formulas in notation

Slots and cover
N_g = L_g · d_g; C_g = N_g · φ / w_g
L: meters of category g, d: items per meter, φ: fill, w: weekly sales, C: display cover in weeks.
Meters needed
L*_g = w_g · C* / (d_g · φ)
C*: the target cover; the difference L_g − L*_g shows a surplus (plus) or a deficit (minus) of meters.
Zone index
I_g = (S_g / ΣS) / (L_g / ΣL)
S: category revenue; an index above 1 means the category sells more than its share of meters.

Worked example

A teaching display: five categories, 50 linear meters, fill 90%, target display cover 1.5 weeks

CategoryMetersSlotsDisplay stock, unitsSales, units a weekCover, weeksRevenue per meter a week, thousand ₽Meters neededDifference, m
Outerwear12.07264.8302.1622.58.33.7
Dresses10.08072.0701.0331.514.6−4.6
Trousers and jeans14.0126113.4751.5118.813.90.1
Knitwear (stacks)8.0112100.8402.5214.04.83.2
Accessories6.07264.8222.954.43.12.9
Total50.0462415.82371.7519.744.65.4

All numbers are illustrative. A positive difference means a surplus of meters, a negative one a deficit; the surplus of outerwear, knitwear and accessories (about 9.8 m) covers the deficit of dresses (4.6 m), trousers and jeans are on target. Before a move run a test in some stores.

Figures

Display cover and target
Bar chart: Outerwear 2.16, Dresses 1.03, Trousers and jeans 1.51, Knitwear (stacks) 2.52, Accessories 2.950123OuterwearOuterwearDisplay cover: 2.162.16Target: 1.51.5DressesDressesDisplay cover: 1.031.03Target: 1.51.5Trousers and jeansTrousers and jeansDisplay cover: 1.511.51Target: 1.51.5Knitwear (stacks)Knitwear (stacks)Display cover: 2.522.52Target: 1.51.5AccessoriesAccessoriesDisplay cover: 2.952.95Target: 1.51.5wk
  • Display cover
  • Target
Data as a table
MeasureDisplay coverTarget
Outerwear2.161.5
Dresses1.031.5
Trousers and jeans1.511.5
Knitwear (stacks)2.521.5
Accessories2.951.5

Display cover and target. Cover is below the target for dresses, which lack space; for trousers and jeans it is on target, above it for outerwear, knitwear and accessories.

Share of meters and share of sales
Scatter plot: 5 points0102030401015202530Outerwear: 24; 27.4OuterwearDresses: 20; 32DressesTrousers and jeans: 28; 26.6Knitwear (stacks): 16; 11.4Knitwear (stacks)Accessories: 12; 2.7AccessoriesShare of meters, %↑ Share of revenue, %
Data as a table
Share of meters, %Share of revenue, %
2427.4Outerwear
2032Dresses
2826.6Trousers and jeans
1611.4Knitwear (stacks)
122.7Accessories

Share of meters and share of sales. Above the diagonal a category sells more than its share of space, below it less; this is grounds for redistribution, not an order.

The planogram cycle. From sales to the plan and back: the execution check returns data to the next revision.

  1. Sales and stock → Category roles; Meters and slots
  2. Category roles → Hall plan
  3. Meters and slots → Hall plan
  4. Hall plan → Set-up and photos
  5. Set-up and photos → Check and review
  6. Check and review → Sales and stock

Specifics by category

Apparel
Apparel: the main planning unit is a meter of rail and a stack; density differs several times over (coats, dresses, T-shirts), so the planogram is counted by item type, not by an average.
Footwear
Footwear: the display unit is a pair on a shelf or a row; a fitting zone and a size stock in the back room are mandatory, one size is on display, so cover in display units shows little, count cover by styles.
Accessories
Accessories: small items, high margin and impulse demand; they go by the till and on the way to it, density per meter is high and display stock is measured in units per cell.
Kids
Kids: display by age and height, not by adult sizes; lower tiers are reachable for children, upper ones for parents; fixture safety (sharp corners, stability) is part of the planogram.
Men
Men’s: a narrow range of styles and colors, purposeful purchase, outfits by occasion (office, sport); display by size is easier to read, so the order by size within a style is stricter.
Women
Women’s: a wide choice of styles and colors, more outfits and looks; mannequins, look zones and color order matter more, and fast sizes sell down unevenly, track them separately.

Common mistakes

  • Meters are shared by historical shares → fast categories empty out, slow ones are frozen → recalculate needed meters from sales and the target cover.
  • Brand: sends a planogram without columns, windows and fixtures → stores cannot execute it → tie the plan to the floor plan of each store type.
  • Retail: counts cover in units without a size breakdown → fast sizes are sold out, the rest hang → watch cover in fast sizes.
  • One density per meter for all clothing types → slots are overstated → measure density by type (coats, dresses, knitwear).
  • The whole hall is changed at once without control stores → it is unclear what gave the result → a test in some stores and a difference-in-differences comparison.

Russian specifics

  • Retail: leases in shopping centers often require approval of windows, decoration and change dates; build this into the planogram set-up schedule.
  • Brand: price and product information on the tag and in the hall is governed by the Rules of sale of goods under a retail sale contract; the tag must be in place and legible. Check details in the current version. Rule: Decree 657 of 30.05.2026: Government Decree of 30.05.2026 No. 657 (rules of retail sale of goods) (rule check not completed).
  • Light-industry goods with marking stay on the store’s books when moved between the hall and the back room; the code is scanned at sale and return. Check the procedure in the marking rules. Rule: Decree 1956 of 31.12.2019: Government Decree of 31.12.2019 No. 1956 (marking rules for light-industry goods) (rule check not completed).
  • Heat maps and traffic counters without identifying people do not need consents; video analytics that recognizes faces works with personal data (152-FZ): agree it with a lawyer. Rule: Law 152-FZ of 27.07.2006: Federal Law of 27.07.2006 No. 152-FZ on personal data (rule check not completed).

Open interactively →