Syntha Lab RU

Warehouse capacity for the peak: places, area, utilization

From the average stock and the seasonal peak coefficient it counts the peak stock, the required number of pallet or bin places at the target utilization and the area with aisles, then with a growth margin. It shows the warehouse utilization in the low season and warns if the utilization at the peak is above 90% when the warehouse work slows down.

Warehouse, fulfillment and the last mile For whom: Logistics and warehouse heads.

Calculate on your data →

At a glance

What question does it answer?
How many places and how much area are needed for the peak, not the average stock.
What data is needed?
Average stock and the peak coefficient.
How to read the result?
Compare the area for the peak with a yearly and a seasonal lease; look at low-season utilization. Example on the default values: Peak stock: 120,000 units; Places for the peak: 3,529; Places rounded up: 3,530; Area for the peak: 6,353 m². The figures are illustrative: enter your own to see your result.

Why and how to reason

A warehouse is designed for the peak, not the average. An average stock of 75,000 and a ×1.6 peak give 120,000; at 40 units per place and 85% utilization this needs 3,529 places and 6,353 m², with growth 7,306 m²; in the low season the warehouse is 53% full.

When to use it

When leasing a warehouse, choosing an operator and planning the season.

How to read the result

The area for the peak against a yearly and a seasonal lease, the low-season utilization.

Common mistakes

A calculation on the average stock, utilization above 90%, no growth margin.

What data is needed?

  • Average stock and the peak coefficient.
  • Units per place, utilization, aisles.

Inputs

FieldUnitValue in the exampleMeaning
Average stockunits75,000The average stock for the year in storage units (pieces or cartons): what you keep in both the low and the high season. The example value is illustrative.
Peak coefficient×1.6How many times the peak stock (November–December) exceeds the average. Take it from your own past seasons, not below one. The example value is illustrative.
Growth margin%15By how much the stock will grow over the lease term. Empty or 0: no growth. The example value is illustrative.
Units per placeunits40How many storage units fit in one pallet place or bin. The example value is illustrative.
Target place utilization%85The share of occupied places at the peak. Above 90% the warehouse works slower: receiving, put-away and picking interfere. The example value is illustrative.
Area of one placem²1.2The area one place occupies without aisles. The example value is illustrative.
Aisles and service zones%50An addition to the area of places for aisles and the receiving and packing zones. The example value is illustrative.

How it is calculated

StepFormula
Peak stock75,000 × 1.6 = 120,000
Places120,000 ÷ 40 ÷ 0.85 = 3,529
Area3,529 × 1.2 × (1 + 0.5) = 6,353 m²
With growtharea × (1 + the growth margin)
Low-season utilizationaverage stock ÷ units per place ÷ places

Worked numbers

Default values from the app; in the interactive version you enter your own.

Peak stock
120,000 unitsAverage stock × the peak coefficient.
Places for the peak
3,529Peak ÷ units per place ÷ target utilization.
Places rounded up
3,530
Area for the peak
6,353 m²Places × place area × (1 + aisles).
Area with the growth margin
7,306 m²
Places with the growth margin
4,059
Place utilization at the average stock
53.1 %In the low season the warehouse is filled this much, the rest stands empty or is sublet.
Warehouse area, m²
Bar chart: For the average stock 3,971, For the peak 6,353, With growth 7,30602,0004,0006,0008,000For the average stockFor the averagestockArea: 3,9713,971For the peakFor the peakArea: 6,3536,353With growthWith growthArea: 7,3067,306
Data as a table
MeasureArea
For the average stock3,971
For the peak6,353
With growth7,306

What to do with the result: compare the area for the peak with a year-round lease and a seasonal lease from an operator; the peak usually falls in November and December, reserve the operator capacity in advance.

A typical mistake: designing the warehouse by the average stock and setting utilization above 90%. The area here is the storage one; the zones of returns, defects and packing are part of the aisles and service zones addition.

Nuances and limits

  • Designing by the average stock.
  • Setting utilization above 90%.
  • Not allowing for growth.

Terms used

Calculate on your data →